Platform lift
The EPL 2000 is designed to definitively resolve the problems of working on tyres of any type of truck or van. The lifting system is entirely pneumatic with a mechanical safety device that prevents accidental total descent (even without air pressure).
The lift has a solid structure that ensures the complete stability of the raised vehicle.
The climbing ramps can be removed to facilitate balancing operations with wheels mounted, and
It has a stopping level to assist operators positioning the vehicle before lifting.
The pedal control allows the platform to be stopped at the required height when moving
Either up or down. Equipped with 4 arms (optional) for large vehicles.
Ax. Capacity / maximum kapasite3000kg]
Working pressure / cal¦sma bas¦nc¦10 v 12 bar
Net weight w/o ramps / net ag¦rl¦k ( rampalar haric)320kg
Ramps / rampalar150 kg
Maximum raise / azami yukseklik400mm
Width / en1370mm
Length / uzunluk2400mm
Height / yukseklik 140mm
Case size, lift / sand¦k olculeri, lift1450 x 2150 x 350 mm
Case size, ramps / sand¦k ˜ltnleri, rampalar500 x 1200 x 500 mm
Net weight w/o ramps / net agirlik ( rampalar haric)320kg
Ramps / rampalar150 kg
Maximum raise / azami yukseklik400mm
Width / en1370mm
Length / uzunluk2400mm
Height / yukseklik 140mm
Case size, lift / sand¦k olculeri, lift1450 x 2150 x 350 mm
Case size, ramps / sand¦k ˜ltnleri, rampalar500 x 1200 x 500 mm
Automatic tyre changer
Automatic tyre changer for 10 û 22 ( inside locking 12 -22, outside locking 10 û 20) wheels complete with automatic lubricator, tyre lever, plastic protection for bead breaker blade 230/400v. 50hz three phase motor, with pneumatic tilting back vertical positions, with pneumaticly operated system which locks the mounting/demounting tool 3mm. Away from the rim edge, with inflating gun.
Optional : tubeless tyres inflating device from slides with pedal control and air tank.
Working pressure 8 û 12 bar
Bead breaker force2500 kg.
Working voltage380v three-phases
Working voltage (optional)220v single-phase
Motor power1, 1 kw- 1, 5 hp / 1500 rpm
Weight235kg
Width845mm
Dept1030mm
Height1950mm
Plate height780mm
Max. Wheel diameter1000mm
Wheel width3 û 12
Specifications
Contents:air impact wrench, cylinder, salver, lift bridge, oil extractor, three functional compression tester, tire conveyer handcart & brake tap
d intension.
6.Stainless steel preventing from grease and rust.
7.Four wheels marching and self-locking insuring direction precision.
8.Mechanical tire trolley save time and manpow
Bead press system
1.Tremendous power and control
2.Aid mounting and demounting
3.Auto-centering simplifies operation
Swing arm column
1.Save space design
2.Locks rim diameter for same sized wheel
3.Steel head with polymer protection
Tabletop
1.10 to 24 in clamping range
2.Diameter marks ease clamping
3.Twin cylinder double the clamping force
4.Polymer rim protector
Bead breaker system
1.Pneumatic powered
2.Shovel with protector sleeve
Motor and drive
1.Powerful motor for best torque and speed
2.Reliable transmission
Specification:
Power supply: 1 ph /110-220v ac, 3ph/380v ac
Motor power: 0.75kw /1.1kw
Operating pressure: 0.8~1mpa
Bead break force: 2500 kg
External clamping: 10~20 in
Internal clamping: 12~24 in.
Rim width: 3~16 in.
Max wheel diameter: 1000 mm.
Car tire changer made in china garage equipment (st-093)
Features:
1. Full automatic tire changer is suitable for handling 10 to 22 inches wheels and capable of handling 20 inches aluminum alloy rims without using special attached device.
2. Also capable of handling extra-wide tires; aid arm installation is optional vertical and horizontal arms with pneumatic dual locking device.
3. Pole is tiltable
4. Self-centering device
5. Slide with step function
6. Tool box under the pole
7. Tubeless in faulting device
8. Complete with air reserve tank
9. Inflating nozzles for tubeless inflating from the slides
10. Frontispiece inflating control pedal
11. Manometer for inflating pressure control equipped with deflating push button
Specification:
Power supply: 110v/220v 1ph 220v/380v 3ph
Motor power: 0.75-1.1kw
Bead-remove cylinder: 2500kg
Operating pressure: 0.8-1mpa
Outside rim clamping: 10"-22"
Inside rimclamping: 12"-24"
Max wheel dimeter: 1000mm
Wheel width: 3"-16"(76-410mm)
Noise: 70 db
The pedal has step function, which can mount the tire accurately and time saving.
The clamp is made of special material, strong and durable.
The universal switch is 40a with a pure silver touching point, it can bear great load with a long using life.
The mounting head is made of special steel, which is wear-resistance, unbend and unbreakable.
The claw, crowbar, demounting head and breaking shoe are optional equipped with the protective cover. This can prevent the rim from being damaged for the operation incorrectly.
Motor power 1.1kw/0.75 kw
Operation pressure 8-10 bar
Max.wheel dia 38úóú¿960 mmú¬
Rim clamping from outside 10úó-18úó
Rim clamping from inside 12úó-21úó
Bead-breaker force 2500 kg
Noise ú+70 dB.
Motor cycle tyre changer
Product code nht 810
Motor tyre changer
Complete with pneumatic bead breaker blade
Manometer for inflation pressure control equipped with deflating push button
Water box in the case
Rim clamping from outside 6"-21"
Maximum wheel diameter 960mm
Maximum wheel width/turntable 260mm
Maximum wheel width/bead breaker 320mm
Bead-remover cylinder(force at 10 bar) 2500kg
Operating pressure 8-10bar(145psi)
Power supply 110v/60hz
220v/50hz(1ph)
380v/50hz(3ph)
Motor power 0.75-1.1kw
Net weight 164kg
Noise <70db
Packing outside dimension 990mmx760mmx910mm
Tyre changer
Product code nht 860-gt
Semi-automatic tyre changer
Suitable for 12"-23"stiff, wide and low-profile tyres
Capable of handling 20" aluminum alloy rims
Air reserve tank in the pole
Quick inflating
Pneumatic bead breaker blade
Manometer for inflation pressure control equipped with deflating push button
Water box in the case
Rim clamping from outside 12"-20"
Rim clamping from inside 14"-23"
Maximum wheel diameter 1000mm
Maximum wheel width/turntable 410mm
Maximum wheel width/bead breaker 360mm
Bead-remover cylinder(force at 10 bar) 2500kg
Operating pressure 8-10bar(145psi)
Power supply 110v/60hz
220v/50hz(1ph)
380v/50hz(3ph)
Motor power 0.75-1.1kw
Net weight 213kg
Noise <70db
Packing outside dimension 1120mmx910mmx910mm
0.988cbm
157 Automobile Tyre Changers Suppliers
Short on time? Let Automobile Tyre Changers sellers contact you.
