Fiberglass.
Fiberglass Fabrics, Fiberglass Cloth
Product Description - Applicable for insulating tape, sleeving and fabric - Silane sizing or Paraffin sizing Characteristics - Consistent Linear Density - Good Sizing Protection and Low Fuzz - High Filament Tensile Strength Storage This Product should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10-30 and relative humidity between 50%-70%.
Model : FRP plastic cover Standard: Flexible Configuration: FRP & Steel frame Features: In general, the role of the sewage treatment plant is to reuse the factory waste water, living waste water, livestock waste water generated from factory, home and fields and the polluted water through separate treatment process and discharge them to river or sea. For this processing of sewage or waste water in the sewage treatment plant, it is required to install the plastic cover on the top of storage tank to prevent the harmful gas or bad odor generated in the tank that stores the waste water and purifies microorganism by chemical reaction or in the process of waste water treatment in the above tank. The installation of this plastic cover is to remove the harmful gas or bad odor and minimize the physical and mental damage of the related people in the working place or residents.
1.Model: ST-100, ST-140, ST-80, ST-12, 2. Capacity: Capacity 250T per a day, 140T per a day, 80T per a day, 12T per a day 3.Configuration: Flow rate tank - Anaerobic tank - Cultivation tank - Intermittent aeration tank - Precipitation tank - Discharge tank 4.Option: UV sterilizer / Flow meter 5.Features: Remove organic compound, nitrogen and phosphorus simultaneously, Strong against shock load of influent water / Excellent processing efficiency / Easy maintenance / Excellent odor removal Mechanism 1. High efficiency of treatment (BOD 98%, t-n 83%) 2. Self-purification of stream by indigenous microorganism in the discharged water 3. Relief effect of mosquito larva 4. Advantageous when using the dehydrated cake as manure 5. Increase of applicability for the change of impact load (flow rate, water quality, temperature) 6. Prevent the civil complaints due to the removal of bad odor (less than environment standard, as a result of analysis by KIST) 7. Increase of sludge precipitation by indigenous microorganism 8. Experiment of mosquito relief using the indigenous microorganism
1.Model: MSTT-100, M-200, M-300, M-400, M-500, M-600, M-501, M-6, 2.Standard: W 3200 X L 8000 x H 2750, 3.Configuration: Man: urinal 7ea, stool 2ea / Woman: stool 2ea 4.Option: Toilet for the disabled/ diaper rack for babies 5.Features: No discharge system mobile toilet Features - Heating/Cooling equipment - Freeze prevention system - MP3 music system - Regular checking system - No need of water supply/sewage - No sewage discharge - Recycling circulating system of flushing water
Introduction - A Toilet designed to use it pleasantly as the appearance looks clean with the clean, natural and simple concept image by creating the harmonized image with the leaves and urban image. 1.Model: Triangle, M-L 2.Standard: W 0000 X L 0000 x H 0000 3.Configuration: Man: urinal 2ea, stool 4ea / Woman: stool 1ea 4.Option: Toilet for the disabled/ diaper rack for babies 5.Features: No discharge system mobile toilet Features - Heating/Cooling equipment - Freeze prevention system - MP3 music system - Regular checking system - No need of water supply/sewage - No sewage discharge - Recycling circulating system of flushing water
1.Model: Round 2.Standard: W 0000 X L 0000 x H 0000 3.Configuration: Man: urinal 1ea, stool 1ea / Woman: stool 2ea 4.Option: Toilet for the disabled/ diaper rack for babies 5. Features: No discharge system mobile toilet Features - Heating/Cooling equipment - Freeze prevention system - MP3 music system - Regular checking system - No need of water supply/sewage - No sewage discharge - Recycling circulating system of flushing water
As a subsidiary of a Chinese state-run company. it offers the best quality & most competitive price.
Carbon fiber modification on engine hood,empennage, surrounding surface, car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by this problem any more after the carbon fiber vinyl come out as its price is lower and easy to operate Model : K9291, K9292, K9293, K9296, K9297 Material Size : 127cm × 50M Fabric : 0.09mm Glue : 30µ paper : 140g.
Chopped Strand Mat Fiberglass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder. Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roof shoot, Autonitive parts, bathroom equipment and cooling towers. Product Features 1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products. 2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter. 3.Excellent flexibility ensures good moldability with no spring-back at sharp corners. 4.Fast and consistent wet-out speed resins and rapid air release reduce resin consumption, improving manufacturing costs, productivity and mechanical properties of the end products. 5.The composite products have high dry and wet tensile strength and good transparency. General Data Binding type : Powder or Emulsion; Densily : 85-900g/m2; Width : Max.3300mm, Tapes available. Edge : 1 or 2 untrimmed edge available upon request.
Surfacing Tissue Surfacing Tissue mainly used in the surface layers of FRP products. It features even Fiber distribution, soft feel, level and smooth fiber surface, less glue content, quick resin soak and good pattern fitness. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance, and longer service life. It is also suitable for spraying; pattern pressing and other FRP pattern technology. Packaging Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets. Stroge Should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10~30 and relative humidity between 50%~75%.
3-D spacer fabric construction is a newly developed concept . The fabric surfaces are strongly connected to each other bv the vertical pile fibers which are interwoven with the skins . Therefore, lhe 3-D spacer fabric can provide good skin-core debonding resistance, excellent durability and superior integrity. In addition, the interstitial space of the construction can be filled up wilh foams to provide synergistic support with vertical piles. These products have broad application prospects in automobile, Iocomotive, aerospace, marine, windmills, building and other industries. Product Characteristics The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction. The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced. The range of the pillar height:3-50 mm, the range of the width:3000 mm. The designs of structure parameters including the areal density, the height and distribution density of the pillars are flexible. The 3-D spacer fabric composites can provide high skin-core debonding resistance and impact resistance and impact resistance, light weight. high stiffness, excellent thermal insulation, acoustic damping, and so on.
Glass Epoxy Fiberglass Sheets, Carbon Prepreg And Fiberglass Prepreg.
Packaging materials, fiber glass material.
Aramid fiber . carbon fiber chop.
Polyurea coating and fiberglass.
Grp sectional water tank,fiberglass tank,industrial water tank,water tank.
Orthopedic casting tape, orthopedic splint, synthetic orthopedic fiberglass cast, synthetic orthopedic poly cast, fiber cast, poly cast, fiberglass casting tape, fiberglass fabric, polyurethane resin, polyurethane coating resin, polyurethane coating machine for casting tape, poly cast.Oem manufacturing, customized manufacturing, exporting, design
