As a subsidiary of a Chinese state-run company. it offers the best quality & most competitive price.
Product : Iq-System scaffold(Ring-lock type) Spec : Steel grade STK700, 48.6*2.0thk, Galvanized steel. Iq-System scaffold is our flagship items since Hory has been producing it in 2010. Currently supplying it to several countries as 'Japan', 'Thailand', 'Russia', 'Cambodia', 'Vietnam', 'Philippines' as well as 'U.S.A'.
Wall anchor use for holding & fasten a scaffolding structure to a building.
Steel plank, footboard for scaffolding.
Base jack for scaffolding 42.7 / 34 *600mm
Plastic handles protect fingers from hot stainless steel lid. Stainless steel lid contains steam during cooking process, and inverts to hold grid and rack when removing food parcels from water bath. Universal rack separates food parcels for even cooking, and prevents parcels from floating to the top, above water line. Positioning it vertically enables you to separate five average-sized pouches. By turning the rack horizontally, it accommodates up to three longer pouches. Control panel and PID controller. Consistent, precision temperature control is mandatory for sous vide cooking. The control panel is used to set temperatures and timers to alert you when your meal is done. See details on next page. Stainless steel inner water bath. Inside the bath is inscribed with Low and High water marks that indicates how much water to initially add to the bath. Remember once you add your food parcels, the level will rise do not exceed the ‘HIGH’ water mark. Ensure that each food parcel you add is submerged completely.
LCD Placard.
Advertising board to maximize the attention due to the complementary expression. By combining the static images and dynamic character LED display.
Advertising board to maximize the attention due to the complementary expression. By combining the static images and dynamic character LED display.
Advertising board to maximize the attention due to the complementary expression. By combining the static images and dynamic character LED display.
V1 & V4 : Model : V1 V2 V3 V4 Outer : 1700 1700 1700 1700 Inward : 1800 2000 2500 2700
Safety Board (working Board) : Specification (mm) : 400 x 1829 400 x 1524 400 x 1219 400 x 914 500 x 1829 Weight (kg) : 15.0 12.5 10.0 7.5 16.0
System scaffolding parts vertically installed with Ledger
Carbon fiber modification on engine hood,empennage, surrounding surface, car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by this problem any more after the carbon fiber vinyl come out as its price is lower and easy to operate Model : K9291, K9292, K9293, K9296, K9297 Material Size : 127cm × 50M Fabric : 0.09mm Glue : 30µ paper : 140g.
Chopped Strand Mat Fiberglass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder. Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roof shoot, Autonitive parts, bathroom equipment and cooling towers. Product Features 1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products. 2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter. 3.Excellent flexibility ensures good moldability with no spring-back at sharp corners. 4.Fast and consistent wet-out speed resins and rapid air release reduce resin consumption, improving manufacturing costs, productivity and mechanical properties of the end products. 5.The composite products have high dry and wet tensile strength and good transparency. General Data Binding type : Powder or Emulsion; Densily : 85-900g/m2; Width : Max.3300mm, Tapes available. Edge : 1 or 2 untrimmed edge available upon request.
Surfacing Tissue Surfacing Tissue mainly used in the surface layers of FRP products. It features even Fiber distribution, soft feel, level and smooth fiber surface, less glue content, quick resin soak and good pattern fitness. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance, and longer service life. It is also suitable for spraying; pattern pressing and other FRP pattern technology. Packaging Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets. Stroge Should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10~30 and relative humidity between 50%~75%.
3-D spacer fabric construction is a newly developed concept . The fabric surfaces are strongly connected to each other bv the vertical pile fibers which are interwoven with the skins . Therefore, lhe 3-D spacer fabric can provide good skin-core debonding resistance, excellent durability and superior integrity. In addition, the interstitial space of the construction can be filled up wilh foams to provide synergistic support with vertical piles. These products have broad application prospects in automobile, Iocomotive, aerospace, marine, windmills, building and other industries. Product Characteristics The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction. The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced. The range of the pillar height:3-50 mm, the range of the width:3000 mm. The designs of structure parameters including the areal density, the height and distribution density of the pillars are flexible. The 3-D spacer fabric composites can provide high skin-core debonding resistance and impact resistance and impact resistance, light weight. high stiffness, excellent thermal insulation, acoustic damping, and so on.
Developing and supplying unmanned Kiosks for cost reduction and work efficiency in stores
Monitors for advertising in over 100 bookstores nationwide
Capture Co., Ltd. is a corporation established in 2007. Starting from the software development business related to financial affairs, it provided consulting to large companies and financial institutions, and conducted sales and marketing of ATM devices. Capture Co., Ltd. recruited and reinforced trading companies and marketing experts based on various business experiences with Chinese companies, and strengthened trade with China through close cooperation with the China-Japan Economic Development Association in 2012. And resource development to contribute to the foundation of Korea's future industry. Capture Co., Ltd. promises to provide only products and services that can satisfy consumers by utilizing various networks overseas and domestically.
