Stainless Steel Kitchenware (Bowls) Dia 160 x 75mm 240gr / Dia 135 x 65mm 200gr / Dia 115 x 60mm 140gr / Dia 95 x 55mm 120gr Material: Stainless Steel 304 Thickness: 0.5mm Cover: PP (Polypropylene) Made In Korea
We have 4sets of used Detroit generators that were used as emergency power sources (Standby only) at a municipal water drainage plant in Korea. Please review the attached documents and assess ENGINE SPECIFICATION ENGINE MODEL Detroit Diesel 8163-7416 1232HP ENGINE NO. 16VF013546 RPM 1,800 Cylinder 16 Injection method Direct injection Cooling method Water Cooled Fuel consumption rate 246â??/h GENERATOR SPECIFICATION (AC Generator, 3�?, 60Hz, Brushless type Generator Model DIG 4800 Emergency output 990 kVA / 792 kW Continuous output 900kVA / 720kW Voltage and Current 600 v x 86.6 A Revolution 1800RPM Excitation Voltage/Current 65V/10A Power Factor 80% Insulation Class F
The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications: Engine Type: 4.6L V8 Horsepower: 250 hp Steering: Digital Throttle & Shift (DTS) Starter: Electric Shaft Length: Available in 25" (X-Long) and 30" (XX-Long) Power Trim & Tilt: Yes Fuel System: Electronic Fuel Injection (EFI) Alternator: 115-amp Weight: Approximately 600 lbs (272 kg) Cooling System: Water-cooled with thermostat & pressure-controlled The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.
- antivrus film - It includes 'zinc' that can protect bacteria. (FDA-Registered safe material, EPA-Registered safe material) - It can be used anywhere - Certified for superior quality and reliability
Bopp film cpp film pe film Pvc cling wrap Materials thickness width length core Pvc 11~21 200~1800 300~1200 76 Roll & box packing
PE protection tapes, PET protection tape, PVC cling food wrap, PE stretch film for pallet packing.
Surface protective(eva/pe) tape, pe film, bopp film, bopp packing tape, lldpe stretch film, pvc & pe cling food wrap, aluminum foil tape.
TPU sheet and hotmelt film, recycled PU coated leather .Export and sole distributors
100% virgin raw materials Main usage: Apparel packing, Textile ,etc Size: ANY size is available Film color: ANY color is available Printing: No Printing, or customized printing.
PE, PP,PVC ,etc 100% virgin raw materials Main usuage: Apparel packing, industrial packaging Size: ANY size is available Film color: ANY color is available Printing: No Printing, or customized printing.
PVC Cling Food Wrap. PE surface protective films/tapes
PVC Cling Food Wrap. PE surface protective films/tapes
Detail Information Bilge alarm indicates an alarm signal when the concentration of drainage from Oily Water Separator/Filter Unit is higher or equal to 15ppm. As the solenoid valve will automatically shut off for 20 seconds after the response, so discharging process of bilge water could be operated without any attention of operator. Structure The bilge alarm case is constructed as a steel box in accordance with IP56 and sensing unit is sealed for water-proved. Electric parts and warning circuit are located in the main board. The front side of bilge alarm has digital ppm displayer and 2 LED (Normal : green, Alarm : red). Sensing unit and case is connected with flexible cable to avoid any damages. Principle of measurement The oil-contents in bilge water is measured by scattering action of the light induced by oil particles. By measuring scattering light and calculating the scattering rate, it factors in the influences of varying light sources. Scattering light can be detected by exposing the high intensity infrared rays to the sampling water passing through the cylindrical Sample -Tube(cell). =ª Specification Range : 0-25PPM Set Point : 15PPM Response Time : Within 20 Seconds(Adjust possible by user) Alarm Contacts/Rating : Single Pole c/o/2.5A at 250VAC Alarm Indication : Red LED on front panel Digital Display : 2digit 7-segment Output Signal : 0 ~ 5VDC, 4 ~ 20mA(option) Power / Consumption : 110/220VAC, 60Hz / 20VA Dimensions : Case:300mm(H) x 200 mm(W) x 120mm(D) Sensing Unit : 190mm(H) x 220mm(W) x 90mm(D) Enclosure Rating : IP56
Size 1100x1100x150mm Static load:4tone Dynamic load:1tone Non-reversible 4 way entry Bulky with individule packing
Cabonate soft drink Tea Energy drink Export standard packing
Plastic tablet pc & computer component, pallet, plastic film, plastic raw materials, fabric.Oem manufatuering & suppliing services
[O-RING, RUBBER SHEET GASKET] - Materials : Choose appropriate material according to NBR, HNBR, EPDM, Silicone, FPM (Viton), Kalrez, CR rubber, temp. and other working materials. - Temperature : -60°C~+300°C, It depends on the material type. (Heat-resistant) - Fluid Sealed : Choose suitable material depending on fluid or air (oil-resistance and chemical-resistance) - Pressure : For static seal, within 100bar (without Back-up Ring), above 100bar (use Back-up Ring) For dynamic seal, within 50bar (without Back-up Ring), above 50bar (use Back-up Ring) - Speed : Reciprocating - Max. 0.5 m/s. Rotary - Max. 0.5 m/s. [SPRING ENERGIZED SEAL] APPLICATION ACTUATORS, Gas turbine engine, ICE MAKERS, Plastic injection moulding machine, Spaceship, Infrared rays system, VALVES PUMPS, Medical experimental equipments, HPLC, Petro-chemical plant, FILLING MACHINE, Hydraulic and pneumatic system for air plane, METERING, Food processing line, Tooling machine, Fuel control line for air plane, Vacuum units, PRESSURE SWITCH, Infrared rays system, Extremely low temperature units and gasket
Recycled Pu Coated Leather For Footwear, Upholsertery, Book Binder( Book Cover, Bible Cover, Passport Cover, Etc), Surgery Glove, Hotmelt ,Tpu ( Tpu+Hotmelt 2 Layer) Film , etc.
* Ethyl Alcohol 70% * 500ml * FDA OTC Certification Completed / FDA Cosmetics Completed / FDA Facility Registration Completed
* substitute of 'LOCTITE 401' * EU RoHS compliant product * Non-solvent : Does not contain organic solvents and does not cause hallucinatory effects. Suitable for use in various work environments. * Cures at room temperature (20C to 30C) and does not require special curing equipment. * Fast curing that bonds in seconds. Reduces job completion time and facilitates automatic production lines. * Transparent and low odor. Works well with any use and material to give a clean finish. * Viscosity (cps) : 90~110 / Tensil-Shear Strength : Above 180 / Initial Cure Speed : 3~5 / Working Temperature : -54~82C
