The CAT988 with the 3408 engine is a powerful machine designed for heavy-duty applications, including container handling. Here are some key specifications:
Engine: CAT 3408 DITA (Direct Injection Turbocharged Aftercooled)
The CAT 3408 engine is a V8 engine, meaning it has 8 cylinders arranged in a V configuration.
Net Power: 538 hp (SAE J1349:2011)
Engine Power: 580 hp (ISO 14396:2002)
Gross Power: 588 hp (SAE J1995:2014)
Maximum Capacity: 50,000 pounds (as indicated on the boom arm in the image you provided)
Fuel Efficiency: Features like Economy Mode help save on fuel while maintaining productivity
Durability: Built with advanced filtration systems for extended performance and reliability
Productivity: Superior digging, higher bucket fill factors, and reduced dig times
The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp
197 Catering Equipments Suppliers
Short on time? Let Catering Equipments sellers contact you.
CASE MW36 Wheel Loader - Typical Specifications
Operating Weight: Approximately 3,200 to 3,600 kg (about 7,000 to 8,000 lbs)
Bucket Capacity: Generally around 0.65 to 0.9 cubic meters
Dimensions:
Overall Length: Approximately 4.0 m (varies with configuration)
Width: Roughly 2.5 m
Height: Around 3.0 m
Lift Height: Typically in the range of 2.5 to 3.0 m
Transmission: Options may include hydrostatic or mechanical drive, depending on the model configuration
Additional Features:
Ergonomic operator station
Versatile hydraulic system for various attachments
The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications:
Engine Type: 4.6L V8
Horsepower: 250 hp
Steering: Digital Throttle & Shift (DTS)
Starter: Electric
Shaft Length: Available in 25" (X-Long) and 30" (XX-Long)
Power Trim & Tilt: Yes
Fuel System: Electronic Fuel Injection (EFI)
Alternator: 115-amp
Weight: Approximately 600 lbs (272 kg)
Cooling System: Water-cooled with thermostat & pressure-controlled
The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.
The Volvo Penta TAMD41M-A is a reliable and powerful marine diesel engine. Here are some key specifications and features:
Engine Type: 6-cylinder, 4-stroke, direct-injected, turbo-charged marine diesel engine with aftercooler1.
Power Output: 147 kW (200 hp)1.
Cooling System: Freshwater cooled exhaust manifold and oil cooler1.
Alternator: 14 V/50 A1.
Other Features: Flexible front engine mounting, wet type exhaust elbow, lubrication oil filter, and turbo-charger
We are one of the concrete pump manufacturers in Korea
Brand: SAMIL GIANT in Korea
Boom length: 67m 62m 58m 52m 48m 45m 42m 37m 32m 28m 24m 21m
Stationary pump, Line pump
We are able to send full details if you make an inquiry
Based on the serial number 10KA0976, your equipment is a SkyTrak 10000M ATLAS telehandler, also known as the All-Terrain Lifter Army System (ATLAS) with a 10,000 lb capacity. Here are the key specifications:
Lifting Capacity: 10,000 lbs (4,536 kg)
Maximum Lift Height: Approximately 27.5 ft (8.38 m) with the 10,000 lb carriage
Maximum Reach: Approximately 24 ft (7.4 m)
Dimensions:
Height: 102 inches (259 cm)
Width: 100 inches (254 cm)
Turning Radius: 13.5 ft (4.1 m)
Frame Tilt: 9 degrees each way
Hydraulic Reservoir Capacity: 55.6 gallons (214 liters)
Fuel Tank Capacity: 44 gallons (167 liters)
Boom: Telescopic 3-stage
Steering Modes: 2-wheel, 4-wheel, and crab steering
Fording Depth: Up to 36 inches (91 cm)
Transportability: Air transportable in C-130, C-141, C-5A, and C-17 aircraft
The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact.
2. Explain in detail how the idea would be operated used
The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer,
3. What features do you believe your idea has that makes it unique and appealing?
The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics.
1) Number of Joints for Each Shaft
- In the case where the number of joints is large, a sensation of impact is increased somewhat.
- The case where the number of joints is small is appropriate for golfers with weak swings.
- In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high.
2) Space between Joints
- Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long.
-The kick point goes down toward the tip when the space between the joints in the butt part is long.
- A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased.
3) Structure of Fabric
- Fabric having high elasticity and strength is used, thereby resulting in distinctive performance
4.What need does the idea fulfill?
This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom.
5. Descripbe possible variations of your idea:
The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact.
2. Explain in detail how the idea would be operated used
The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer,
3. What features do you believe your idea has that makes it unique and appealing?
The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics.
1) Number of Joints for Each Shaft
- In the case where the number of joints is large, a sensation of impact is increased somewhat.
- The case where the number of joints is small is appropriate for golfers with weak swings.
- In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high.
2) Space between Joints
- Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long.
-The kick point goes down toward the tip when the space between the joints in the butt part is long.
- A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased.
3) Structure of Fabric
- Fabric having high elasticity and strength is used, thereby resulting in distinctive performance
4.What need does the idea fulfill?
This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom.
5. Descripbe possible variations of your idea:
The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
Microprocessor-contolled
Inverter system makes the machine simple structure and easy operation /maintenance.
Pre-set ply-counter with automatic stop device.
Automatic tension controller allows porper tension and good spreading.
Automatic fabric rewinder and unwinder
Fabric insertion
Cloth edge alignment sensor
Non-contact type stop sensor
Automatic elevation, speed control and manual speed control are implemented by knob during operation.
Supplier From
Busan,
South Korea (Republic Of Korea)
Hydraulic test unit & system, impulse test system, electric driven hydraulic pump, hand pump, ram(hydraulic cylinder), other hydraulic tools & equipments.
Note
** Product Property
- A precise thermometer controlling the temperature in accordance with a user's setting by detecting the precise temperature within by ±0.5 F error of measure measurement
- It can be also used Temperature Controller when you put in heat pump under the main body
- Product that is currently exported to American Aquarium company.
- It can be used every countries handling sea water tank
** Precaution
- When you use this, you have to connect a stabilizer. like earth leakage breaker
- When blackout comes or installing product, you have to check set-up temperature
- only for cooling, Operating time of compressor is about 3 minutes.
Wait a minute please until it operates.
- Main body of product should be installed at dry area
- Main body of product should be avoided from water
- Do not use close to magnetic field
- LO on Display : Short at temperature sensor
- Temperature is under 0 C - HI on Display :
- Short at temperature sensor
- Temperature is under 50 C
Data
- Length of Sensor : 4M
- Usable Power : AC 220V / 60Hz , AC 110V / 50,60Hz
- Range of temperature : 0C - 50C
(Cooling ; 0 C - 20 C . Heating ; 14 C - 34 C)
- Accuracy : Within ± 0.5C
- Maximum Current Capacity : For Cooling : 20A. For Heating : 10A
