We have Long-term relationships with our customers and Suppliers from all over the world from whom we have learned and they have learned from us to ensure Long Term success. We ensures quality, diversity and customer satisfaction by offering technical advice. Main Specification: Preferred Density Range : 18 to 25kg/ m3 Clean & Dry Unused Off-Cuts : 100% Color: Mixed Foam Skins : None Re-bonded Foam : None Bare Skins : None Ester-type Foam : None Hydrophilic Foam : None Laminated Fabric/Foam : None Laminated Vinyl/PVC/Foam : None Reticulated Foam None Visco-elastic Foam : None Foreign Matter/Contamination : Absolutely None Factory Sweepings : Absolutely None Recycled, Old or Used Foam : Absolutely None Packaging : In compressed by bales Weight: 250 to 300kgs per bale Loading Quantity: 40' High Cube containers can loaded no less than 18,000kgs
2.Arabica coffee bean -Grade 1, screen 16 Moisture :12.5% max. Admixture :0.5% max Black & Broken beans : 2% Above screen 16 : 90% 3.Arabica/ coffee beans Grade 2, Screen 13 Moisture: 13% max. Admixture: 1% max. Black & Broken beans: 5% max. Above Screen 13: 90% ARABICA AND ROBUSTA COFFEE BEANS , GREEN COFFEE BEANS MOISTURE: 13% MAX. FOREIGN MATTER: 0.5% MAX BLACK & BROKEN:2% MAX. ON SCIEVE SCREEN 16: 90% MIN. 1.ROBUSTA COFFEE SCREEN 13, GRADE 2 SPECIFICATION: MOISTURE: 13% MAX. FOREIGN MATTER: 0.5% MAX. BLACK AND BROKEN: 5% MAX. ON SCIEVE SCREEN 13: 90% MIN. 2.ROBUSTA COFFEE SCREEN 16, GRADE 1SPECIFICATION: MOISTURE: 13% MAX. FOREIGN MATTER: 0.5% MAX. BLACK AND BROKEN: 2% MAX. ON SCIEVE SCREEN 16: 90% MIN 1.Arabica coffee grade 1, screen18 Moisture: 12.5% max Admixture :0.5% max Black & Broken beans: 2% Above screen 18: 90%
Available for sale is top grade Arabica Coffee Beans, Robusta Coffee Beans, Green Coffee Beans , now available at affordableprices , best market conditions ARABICA AND ROBUSTA COFFEE BEANS , GREEN COFFEE BEANS MOISTURE: 13% MAX. FOREIGN MATTER: 0.5% MAX BLACK & BROKEN:2% MAX. ON SCIEVE SCREEN 16: 90% MIN. 1.ROBUSTA COFFEE SCREEN 13, GRADE 2 SPECIFICATION: MOISTURE: 13% MAX. FOREIGN MATTER: 0.5% MAX. BLACK AND BROKEN: 5% MAX. ON SCIEVE SCREEN 13: 90% MIN. 2.ROBUSTA COFFEE SCREEN 16, GRADE 1SPECIFICATION: MOISTURE: 13% MAX. FOREIGN MATTER: 0.5% MAX. BLACK AND BROKEN: 2% MAX. ON SCIEVE SCREEN 16: 90% MIN 1.Arabica coffee grade 1, screen18 Moisture: 12.5% max Admixture :0.5% max Black & Broken beans: 2% Above screen 18: 90%
Item: Green coffee beans Variety: Arabica/ Robusta Grade: S13, S14, S16, S18 Type: Unwashed/ Cleaned/ Wet polished Grade 1 S18 unwashed FAQ - On sieve screen 18: 90% min -Moisture:12.5% max - Foreign matter: 1% max - Black & Broken: 2% max Grade 1 S18 cleaned - On sieve screen 18: 90% min -Moisture:12.5% max - Foreign matter: 0.2% max - Black (0.1%) & Broken (0.5%): max Grade 1 S18 Wet Polished - On sieve screen 18: 90% min - Moisture: 12.5% max - Foreign matter: 0.2% max - Black (0.1%) & Broken (0.5%) max Brand: OEM Packing: 60kgs in jute bag 19MTS/20FT; 27MTS/40FT Shelf-life: 2 years Storage: In dry and cool place Certificate: HACCP/ISO/ Customer's request
1. Raw Material: #1 Grade Pecan Pieces which meet or exceed requirements for grade as specified by the SGS. 2.Count/Pound: 251-300 3. Size: 85% Minimum Halves (Including �¾ halves)1% Maximum through through a 8/64â?? Round Hole Screen 4. Color: Light Amber to Amber 5. Tolerance: 3% defects including 0.5% for rancidity, mold, decay, insect injury or serious damage caused by shriveling, leanness, or external discoloration. 6. Foreign Material: 0.05% 7. Aflatoxin
Grade Arabica Coffee Beans, Robusta Coffee Beans, Green Coffee Beans , now available at affordableprices , best market conditions Arabica And Robusta Coffee Beans , Green Coffee Beans Moisture: 13% Max. Foreign Matter: 0.5% Max Black & Broken:2% Max. On Scieve Screen 16: 90% Min. 1.Robusta Coffee Screen 13, Grade 2 Specification: Moisture: 13% Max. Foreign Matter: 0.5% Max. Black And Broken: 5% Max. On Scieve Screen 13: 90% Min. 2.Robusta Coffee Screen 16, Grade 1specification: Moisture: 13% Max. Foreign Matter: 0.5% Max. Black And Broken: 2% Max. On Scieve Screen 16: 90% Min 1.Arabica Coffee Grade 1, Screen18 Moisture: 12.5% Max Admixture :0.5% Max Black & Broken Beans: 2% Above Screen 18: 90% 2.Arabica Coffee Bean -grade 1, Screen 16 Moisture :12.5% Max. Admixture :0.5% Max Black & Broken Beans : 2% Above Screen 16 : 90% 3.Arabica/ Coffee Beans Grade 2, Screen 13 Moisture: 13% Max. Admixture: 1% Max. Black & Broken Beans: 5% Max. Above Screen 13: 90% Characteristic: Aroma: Earthy Flavor: Spicy, Long After Taste Body: Full Body
Specification: Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. Application: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. Application Suitable for film, heavy packaging film, cable insulation materials, blow molding and foam products.
Product: Brass Scrap Honey Specification - Temper : 'O' 1/2 H - Tensile Strength : 340 Min-400 Min - Elongation % on 50 mm G.L : 40 Min - Vickers Hardness VPN : 80 Max/95 Min-120 Min -Cu -: 58% - 60% -Pb -: 1.5% - 2.5% -Imp -: 0.3% (Max.) -Zn -: Remaining Consist of: doors and windows Profile frame Our Brass Honey Scrap consist of Faucet scrap, scrap of machinery parts, plated brass, etc Specification - Temper : 'O' 1/2 H - Tensile Strength : 340 Min-400 Min - Elongation % on 50 mm G.L : 40 Min - Vickers Hardness VPN : 80 Max/95 Min-120 Min -Cu -: 58% - 60% -Pb -: 1.5% - 2.5% -Imp -: 0.3% (Max.) -Zn -: Remaining Consist of: doors and windows Profile frame, house utensils Our Brass Honey Scrap consist of Faucet scrap, scrap of machinery parts, plated brass, etc Item Standard Result Cu% 99.9 min 99.99 Sb% 0.002max 0.001 As % 0.002max 0.0006 Fe% 0.005 max 0.0012 Ni% 0.002 max 0.0008 Pb % 0.005max 0.0025 Sn% 0.002max 0.0007 S% 0.005max 0.003 O% 0.002max 0.001 Zn% 0.005max 0.002 P% 0.001max 0.0002 50kgs/bale,about 20mt/20'fcl
Green Coffee Beans Arabica coffee is a type of coffee made from the beans of the Coffea arabicaplant. The raw beans are imported from famous coffee farm of the world. Product Type:Arabica Coffee Bean Grade A Variety: Arabica Weight (kg):50/60kg/jute bag 20ft container: 19.5tons or 22tons(BULK PACKING) Max. Moisture (%):12% MAX Additional Ingredient:0.5%MAX Rate of Defect:7.0%MAX Cultivation Type:Common Size:14 -16 screen
Virgin HDPE 7000F Polyethylene HDPE 7000F is high density polyethylene film grade which well known for the high quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness and good heat sealability. It is suitable for producing general purpose packaging films in a wide range of size and thickness. Products indicators HDPE cable material Property Unit Typical Value Mass density g/cm 0.941-0.959 Melt flow Rate(190 Centigrade /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature Centigrade MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15
Top quality white kidney beans, White kidney beans processing First step: machine selected, decrease admixture Second step: stoning machine, wipe out the stone and stick Third step: magnetic separator, wipe out soil block. Fourth step: specific gravity stoner, wipe out bad beans. Fifth step: after two times processing by specific gravity stoner, beans polished by polished machine Sixth step: beans are transmitted to the colour selected machine by a conveyor Seventh step: classifying Screen, distinguish the size of the bean Eight steps: hand selected. Ninth step: automatic packing Tenth step: storage
We are exporters of large quantity of HDPE Milk Bottles Scrap with good quality that meet every standard HDPE Milk Bottle Scrap Quality : HDPE Clear natural color Clean and stored inside . Dry material. Packed in bale. Form film Color clear Packing in bale Origin post-commercial Quantity per load 27-28MT in 40ft container We also have the following products: - HDPE Clear/Natural Regrind (clean and washed) - HDPE Clear/Natural Scrap Baled - HDPE White Regrind/Baled (clean and washed) - HDPE Milk Bottle Regrind - LDPE Film Baled 100, 99/1 and 98/2 - LDPE Clear/Natural Regrind - LDPE White Regrind HDPE milk bottle scrap Hdpe flake HDPE Drum in baled HDPE Regrind LDPE Clear film scrap Pet bottle scrap Pet flakes hot washed Green pet strip scrap PC water bottle scrap PC Water bottle regrind PC CD / DVD METALIZED AND CLEAR SCRAP Bopp film roll scrap pp jumbo back scrap PP super sack scrap PP big rope scrap PP bucket scrap PMMA Acrylic sheet scrap LLDPE film scrap EVA film roll scrap EPS Block scrap Contact Us Directly With Your Email For More Details
Roasted Organic Coffee Beans We supply 100% arabica, robusta from the farm We can roast coffee bean as your requirement, we always supply coffee bean in new season, high quality and competitive price, Specifications 100% Arabica, No butter, S.18 Roasted Arabica Coffee Beans ( S.18, No butter) Moisture: 3.71% Caffeine: 1.58% Aflatoxin: Not detected E.Coli: < 10 CFU/g Coliform:
Grade AA Raw and Roasted Macadamia Nuts Nutrient ingredients: Protein, dozens of important amino acid, vitamin B1, B2, B6, vitamin E, Calcium, Phosphorus, Iron, Zinc Character: Rich Nutrition, sweet crisp delicious, unique flavor, has been described as the world's top edible nuts. Functions: Effectively lower blood pressure; Anti-diabetes & cancer; Prevent rheumatoid arthritis; Radiation protection; Anti-aging. Class: AAA High-class Packing: 10kg/Carton or as you like Storage: In cool and dried place Shelf life: 365 days Specifications for our macadamia nuts Moisture 13% (max) Foreign matter 0.5% (max) Black and Broken 5% (max) On sieve screen 13.9% (max) Nutritional Composition: 80% fat, 9.2% protein, 7.9 % sugar, 6.4% fiber
Low density polyethylene (LDPE), also known as high pressure polyethylene, is a kind of plastic material, it is suitable for thermoplastic molding processing of various forming processes, forming processing is good. LDPE is mainly used for thin film products, but also for injection products, medical devices, medicine and food packaging materials, blow molding hollow molding products and so on. Item Value Product Name LDPE Granules Other Names Low Density Polyethylene Place of Origin China Grade Standard Industrial Grade,Injection molding grade Density 0.91-0.93 g/cm³ Appearance White Granules,customized color Application Plastic,film , bag Sample provide Package 25 kg/bag,1000 kg/bag,customized packag
Product Name:Sodium bromide Cas No.ï¼?7647-15-6 Molecular formula:NaBr Molecular weight:102.89 Physical and chemical properties: colorless cubic crystal or white particle powder; bitter taste; relative gravity: 3.203; melting point747.0�°C; boiling point: 1390�°C Use:for the manufacturing of photographic film, diuretic, sedative and brominating agent Packingï¼?compound bag, fiber can; 30�?37(cm) inner plastic bag, 25kg Storage and transportation:in dry and ventilated place, in seal
It is used in synthetic resin, adhesive, coating, etc., and also used in the production of herbicide, etc. 1. Pesticides: used in the production of pesticides, etc; 2. Coating: synthetic high-grade automotive paint; 3. Resin: synthesize various adhesives; 4. Papermaking: synthetic paper reinforcing agent; 5. Casting: sanding and film remover, synthetic casting adhesive; 6. Aquaculture: fumigation disinfectant; 7. Organic chemical industry; 8. Others: disinfection, sterilizing agent. Purity: 96%min.
Melamine Glazing powder Used for shining the Melamine dinnerware surface made by melamine moulding compound and urea moulding compound. The article coated with Glazing Powder has a shinny & harder surface and resists better to cigarette burns, foodstuffs, abrasion and detergents. Packaging: Paper bag with inner PE film bags. 10/25kg per bag Storage: Kept in airy, dry and cool room. Storage period: 12 months from the manufacturing date. Test should be undertaken when expires. Qualified products can still be used. Transportation Caution: avoid moisture, heat, dirt and packaging damage. Melamine resin powder LG220 Tech.Sheet Packaging Details Packed in 10/25kg paper bag with inner water proof PE film. Storage: Kept in airy, dry and cool room. Storage period: 12 months from the manufacturing date. Test should be undertaken when expires. Qualified products can still be used. Transportation Caution: avoid moisture, heat, dirt and packaging damage.
Full Specifications Electro copper Cathode Grade A 99.99% Dimension : 914mm x 914 x 12mm (appr.) (+/-1%) (LME Standard) 1. Weight of each sheet: 125kgs (+/- 1%) 2. Net weight of each pallet: 2mts (+/- 1%) 3. Min. weight in each container: 20mts approx. 4. Gross weight of each container: 22.20mts approx. 5. Copper (Cu) min% 99.99%-99.97% min Packing: Palletized banded by aluminum bands Inter packing: Polyethylene film vacuum packaging for copper cathode for sale. Outer packing: carton/plywood case.
THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.
