Find Verified Industrial Clothing Suppliers, Manufacturers and Wholesalers

Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps.
Purity : Complete Battery with full contents, except the liquid
Car batteries are treated as hazardous waste.

Drained / Dry Whole Intact Lead Batteries (RAINS)
Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS)
SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES :
To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable.

Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS)


6V1.3AH sealed lead acid battery.

1/Product Specification:


Item No.:DHB613;

Voltage:6V;

Normal capacity:1.3AH/20hr;

Dimension(L*W*H):97*24*52mm;

Total height(with terminal):57mm;

Weight:0.30kg;

2/Product Feature:

(1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life.

(2)Low self-discharge rate, small internal resistance.

(3)The unique construction and sealing techniques of the battery,
add the ABS plastic crust that guarantee leakproof operation in and
position with no adverse effect to capacity or service life.

(4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.

(5)No pollution and no harm.

Clear PET Bottle Scrap Sorted Clean

Material PET Polyethylene Terephthalate

Color Transparent No GreenBlue

Form Whole Bottles Labels Caps Removed

Condition: Prewashed high purity

Usage Recycling into foodgrade PET fibers granules

Loading Capacity 2426 MT per 40ft container

Price 500 750 CIFMT

3 Crushed PET Bottle Scrap Baled Washed
Material PET Polyethylene Terephthalate

Color Mixed or Clear as per request

Form Compressed Bales

Condition Cold washed moisture 2

Usage: Recycling into PET flakes or pellets

Loading Capacity 2528 MT per 40ft container

Price 550-850 CIF MT

Specifications
Product : Scrap Pet Bottle.Pet Plastic Bottle
Grade: 100% PET
Color ratio: Clear 100% individually & Green 100%
Appearance: Bottles
Impurity : No Caps, rings, or labels
PVC : Less than 0.01%
Water Content : Less than 0.01% moisture
Packing; Pressed in Bales.
Baled and Loaded in 40' HC! 115cm X 75Cm X115 cm
Commodity: PET Bottle


Price 510 usd per ton .

Minimum order 14 tons

Features & Application

The sweetness of xylitol is comparable to that of sucrose, and it can absorb a lot of heat when dissolved in water. It is the one with the largest endothermic value among all sugar alcohol sweeteners. When consumed in solid form, it produces a pleasant cooling sensation in the mouth.

1. Xylitol is suitable for sweeteners, nutritional supplements and adjunctive therapy. It is an intermediate of human carbohydrate metabolism. In the absence of insulin in the body to affect glucose metabolism, it does not require insulin to promote. It can also pass through the cell membrane and be absorbed and utilized by tissues, providing nutrients and energy to cells .

2. Xylitol can promote the synthesis of hepatic glycogen, the blood sugar will not rise, and it has the effect of improving liver function and anti-fatty liver.

3. The anti-caries properties of xylitol are the best of all sweeteners. First, xylitol cannot be fermented and utilized by microorganisms that produce dental caries in the oral cavity; secondly, when chewing xylitol, it can promote the secretion of saliva, and more saliva can flush the microorganisms in the mouth and teeth.

4. Xylitol provides energy for the body, synthesizes glycogen, and reduces the consumption of fat and protein in liver tissue. It protects and repairs the liver, reduces the production of harmful ketone bodies in the body, and does not worry about gaining weight due to consumption.

Rutile is a relatively pure titanium dioxide. It has excellent properties such as high temperature resistance, low temperature resistance, corrosion resistance, high strength, and small specific gravity. It is widely used in military aviation, aerospace,navigation, machinery, chemical industry, seawater desalination, etc. Rutile itself is one of the necessary raw materials for high-end welding electrodes, and it is also the best raw material for the production of rutile titanium dioxide. The chemical composition is TiO2.

GENERAL TITANIUM DIOXIDE CR6618
CR6618 is a zirconium, aluminum and organic surface treated multipurpose rutile titanium dioxide pigment, it has average particle
size distribution, good whiteness, good dispersion, high gloss, good hiding power and high weather resistance properties. lt is
widely used in coating, paints, ink, leather, rubber and ink production.

Application Fields
Coating/Ink (solvent-based, tin-printing) /Leather, color paste and sheet/Paints /Plastic/Rubber

Star anise is used mainly as a spice but it is also known to have numerous important health benefits.
Star anise is not related to the European anise plants but it has a similar aniseed or licorice-like flavor. It can be used in cooking as a spice or drunk as a tea Star anise contains plenty of important minerals and vitamins including Vitamins A and C as well as small amounts of B vitamins. It also contains calcium and phosphorus but in terms of its medicinal value, perhaps its most important compound is shikimic acid.

Our product:
- No impurities
- No preservatives
- No colorant
- No odorant
Time of use: 24 months from the date of manufacture
Specification:

DRIED STAR ANISE

Style: Dried

Moisture: 13 % max
Admixture: 1% max
No fungus, natural colour
Flower size: 2.5 cm up (80% min)
Broken: 10 % max

Specifications
Potassium Hydroxide is a white flake or colorless clear liquid. It is one of the strongest alkalis.

Properties:
Product Name:Caustic Potash or Potassium Hydroxide
CAS No.:1310-58-3
EINECS No.:215-181-3
HS.Code:2815200000
Molecular Weight:56.11
Appearance: White Flake or colorless clear liquid

Main Applications:

Potassium Hydroxide is mainly used in alkaline batteries industry, soaps, high-class detergents and cosmetics. Industrial ,medicine intermediate, potassium chemicals, synthetic rubber,
ABS resin, food additive dyestuffs and so on

Packages:
Plastic woven bags.
According to customer's requirement.

-Phosphoric acid
-Polyethylene glycol/PEG 400, 600, 1000, 1500, 3000, 6000
Refined Glycerine 99.7% Descripitons

English Name : Ethylene diamine tetraacetic acid (EDTA)
Molecular Fomula : C10H16N2O8
Molecular Weight : M=292.24
CASNo. : 60-00-4

Properties : white crystal powder melting point 240(decomposition) insoluble in cold water ,alcohol and general organic solvent, slightly soluble in hot water, but soluble in sodium hydroxide, sodium carbonate and ammonia solution.

An agent for complexation, EDTA is mainly used for water treatment, as an additive to detergent, a chemical for photography, paper-making and oil-field. It is also used as detergent for boiler cleaning and reagent in chemical analysis.

1. High molecular chemical industry: EDTA is used as polymetization activator for butyl bezene latex, and polyreaction terminator in acrylic fibre production.
2.Daily chemicals: EDTA is used as additive to detergent, skin cream and hair-conditioner.
3.Paper-making: EDTA is used for treating the steamed fibre. It will promote the whiteness of paper and reduce the incrustation in the steamer.
4.Pharmaceutical industry: Through cyclopolymerization with methyl amide, EDTA is made into ethyl amide, a remedy for psoriasis. It is also a stablizer for some vaccines and an antihaemoagglutinin.
5. Textile dyeing and printing: EDTA will promote colour ability of the dyestuff and brightness of the dyed fabric.

Package of Disodium edta zinc chelated

Packing: 25KG/bag , Pearly membrane compound bag, with PE inside or according to the customers demand.

Storage: Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down.

THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.

AS PS ABS PLA HDPE Granules
Acrylonitrile - styrene copolymer.
Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as
engineering plastics.Excellent heat resistance and solvent resistance.

Application.
1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases.

2. Special grade: blade of fan, batteries housing, lighters.

3. Refrigerator Sleeves, Miscellaneous

4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling
5. High Transparency, Heat Resistance, chemical resistance

PC + Glass Fiber reinforced (GF)

The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating
improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm.

Grade: (ML3410-30 / MH3515-30 / MN-3110-30)
1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF)
General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact.
Application: Watch parts, switches and nobs, OA equipment.

2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF)
Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage
and dimensional stabilities.
Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames.

3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF)
MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance,
surface aesthetics and weld line strengths.
Applications: Meter cases, electrical and electronic housings.

LDPE Granules
Low-density polyethylene (LDPE) is a synthetic resin using a high-pressure process via free radical polymerization of ethylene and is therefore also called high-pressure polyethyleneâ. It features light, flexible, good freezing resistance and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt, and excellent electrical insulation properties. Its vapor penetration rate is low.

CHEMICAL CHARACTERISTICS:
Free Fatty Acid: 0.1 - 0.15% max
Peroxide Value: 1.0 - 2.0 meq/kg max
Color (Lovibond): 12.0 - 15.0 Yellow / 1.5 - 2.0 Red
Iodine Value (Wijs): 100 - 122
Moisture: 0.05 %max
AOM: 20 hrs min
Cold Test: 5.5 - 12 hrs min
Refractive Index @ 40oC: 1.460 - 1.467
Specific Gravity @ 25oC: 0.914 - 0.920
Saponification Value: 182 - 193
Smoke Point: 460 - 530oF
Flash Point: 610 - 640oF
Fire Point: 670 - 690oF

FATTY ACID PROPERTIES:
C16:0 Palmitic 3.0 - 5.0%
C16:1 Palmitoleic 0.2 - 0.3%
C18:0 Stearic 1.0 - 3.0%
C18:1 Oleic 56.0 - 76.0%
C18:2 Linoleic 10.0 - 24.0%
C18:3 Linolenic 4.0 - 13.0%
C22:1 Erucic 0.2 - 1.8%

FATTY ACID DISTRIBUTION:
Saturated 4.3 - 7.4%
Monosaturated 54.4 - 65.0%
Polyunsaturated 27.2 - 37.0%


CRUDE CANOLA/RAPESEED OIL SPECIFICATIONS:
Free Fatty Acids (As OLEIC) Molecular Weight 282-Basis: BASE 1.00%
MAX. 1.25%
Moisture and Volatile Matter: 0.20% MAX.
Density (Specific Weight) at 25 C and 4 C Min. 0.9180 Max. 0.9225
Flash Point: MORE THAN 121 (250 F)
Saponification value Min. 188 Max. 198
Impurities (Insoluble in Petrol Ether): 0.10% MAX.
Unsaponifiables Matter (test as per N.O.P.A.): Max. 1.50 pct.
Sediment (Gardner Break Test): 0.10% MAX.
Lecithin (expressed as Phosphorous): 0.02% MAX.
Color Index (MG Iodine) (Lovibond Cell 1 inch): 50-60 Yellow and 5-6 Red.
Refractive index at 20 degrees C: 1.505 to 1.512
Halphen reaction Negative
Density (at 15�° C): 900-930kg/m3
Flash Point: 220�°C ( closed up, Pensky-Martens method)
Calorific value: 35.000 kJ/kg
Kinematic viscosity: 38 mm2/3 (40�°C)
Coke deposit: 0.4 mass-% (Conradson procedure)
Iodine value: 100-120g/100g
Sulphur content: 20mg/kg
Neutralizations number: 2,0mg KOH/g
Phosphorus content: 15mg/kg
Water content: 75mg/kg
Ash: 0.01 mass%

SPECIFICATION FOR PURE REFINED SUNFLOWER OIL
Free Fatty Acid (as Oleic): 0.05% Maximum
Moisture and Impurities: 0.10% Maximum
(AOCS Ca 2d-25)
Peroxide Value: 2.0 Maximum
Color (Lovibond Scale): 2.5 Red Maximum
Iodine Value: 88-115.0
Oleic: 55% Minimum
75% Maximum
Flavor: Pleasing
Appearances: Pale yellow, bright & clear oily liquid
(Waxes Not Separated) Will be cloudy at room temperature
Odor and Flavor: Odorless and Bland
Smoke Point: 230C min. +/- 10C
Flash Point: 330C min. +/- 10C
Other Possible Specs:
Saponification Value: 186-194
Unsaponifiable: 1.5% Maximum
Specific Gravity by 20 Degrees Centigrade: 0.917-0.924



Packaging: 1,2,3,5 Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums.
Labeling: We design buyer's own label on the PET Bottles.



Organoleptic:Neutral/bland taste; absence of foreign odours and flavours
Moisture and volatile matter 0.2% maximum
Insoluble impurities 0.05% maximum
Free fatty acid 0.15% maximum expressed as oleic acid
Linoleic acid (C18:2): 48.3-74% of total fatty acids
Delta-7-Stigmasterol 6.5-24 % of total sterol
Acid value 0.6 mg maximum of KOH/g oil
Color 5-1/4 inch Lovibond cell
Red: 1.5 maximum
Yellow:15 maximum



Appearances:Pale yellow, bright & clear oily liquid
Odor and Flavor Odorless and Bland
Taste Excellent

Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless.

Taste: Practically Tasteless.

Molecular Weight: 76.1g/mole

Boiling Point: 188C (370.4F)

Melting Point: -59C (-74.2F)

Specific Gravity: 1.036 (Water = 1)

Vapor Pressure:0 kPa (@ 20C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C

Vapor Density: 2.62 (Air = 1)

Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9

Dispersion Properties: See solubility in water, acetone

Application:
Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent.

Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless.
Taste: Practically Tasteless.
Molecular Weight: 76.1g/mole
Boiling Point: 188°C (370.4°F)
Melting Point: -59°C (-74.2°F)
Specific Gravity: 1.036 (Water = 1)
Vapor Pressure:0 kPa (@ 20°C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C
Vapor Density: 2.62 (Air = 1)
Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9
Dispersion Properties: See solubility in water, acetone

Application:
Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent for tobacco.

Packaging Details
Mono Propylene Glycol MPG CAS: 57-55-6
Iron drums, 215kg/drum, 17.2 MT/20GP
Flexitank: 22-23MT/ flexitank cost little

We are direct manufacturer and exporter of Crud and Refined Rapeseed oil, olive oil, sunflower oil, soybeans oil, jatropha oil, canola oil, Palm oil, virgin coconut oil, Corn oil,Edible oil, used vegetable cooking oil.We need reputable buyers ready to buy and enter into long term yearly, monthly or weekly contracts with our company. We will highly welcome buyers who are willing to travel or send representatives. We would like our first time clients to visit us for viewing, purchase, business discussion, shipment and others, we are happy to welcome you in any of our branches. Contact us to start doing business with us.
Sunflower Oil,Corn oil,Soybean Oil,Olive oil,Jatropha oil,Sesame Oil,Palm oil,Coconut oil,Canola oil,Rapeseed Oil,Edible oil,Peanut oil.
JATROPHA OIL SPECIFICATION

Free fatty acids 3, 5% Max

M.I.U(Moisture and Impurities) 0.1 % max

Saponification value: 18185-1955-195

Iodine value: 120

Titre C (melting point) 13.75 C

Specific Gravity @ 25â??C 0.915

Density (kg/m3) 920

Flashpoint by P.-M. (Degree C) 220

Calorific Value (kj/kg) 36, 000

Kinematic Viscosity (40 deg.C) (mm2/s)

Carbon Residue (mass-%) 0.4

Sulphur Content (mg/kg) 16

Contamination (mg/kg) 24

Acid Value (mg KOH)/g) 7.0

Oxidation Stability (110 deg.C)(h) 5.0 (min)

Phosphorus Content (mg/kg) 15

Ash Content (mass %) 0.01

Used Cooking Oil

Specifications:

Appearance: Dark brown or black, depending on usage

Odor: Characteristic of used frying oil

Free Fatty Acids (FFA): Typically 5%-15% (varies based on usage)

Moisture Content: 0.5% - 1%

Impurities: Contains food particles, carbon, and other residues

Uses:

Biodiesel production

Animal feed industry

Industrial applications

Recycling Benefits:

Reduces environmental impact

Can be reprocessed into usable products like biodiesel

Packing:

Available as per buyer's request (e.g., in 200L drums, bulk tankers, or customized containers)

Price:

$350 CIF/MT (Cost, Insurance, and Freight per Metric Ton)

$320 FOB/MT (Free on Board per Metric Ton)

1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc.

2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products.

3.Polyethylene glycol series products can be used as raw materials for ester surfactants.

4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry.

5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface.

6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler.

7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity.

8.PEG-4000 and PEG-6000 .

9.PEG8000 .

We are offering a comprehensive line of the finest White Watermelon Seeds. These kinds of seeds contain iron, copper, potassium, manganese, magnesium, phosphorus, sodium, & zinc. They also have fats like monounsaturated & polyunsaturated fatty acids. Owing to such nutrients, these are ideal seeds to provide the consumers high energy that promote healthy lifestyle. Generally come in sizes like 8cm, & 9cm, the White Watermelon Seeds are free from impurities, and can be availed in the needed amounts with premium PP bag packaging.


Watermelon Fruit. It is used in preparing the egusi soup normally eaten by Africans. It also contains oil that can be used for other purposes.


Product Name Watermelon seeds
Style Melon seeds
Processing Type Dry
Specialty Natural, healthy, nutritious and convenient addictive-free food
Brand Name Affectiveness
Color Black Rind/White/Red/Yellow
Taste Spiced
Appearance Whole/Kernel
Shelf Life 2 years
Material Watermelon seed
Grade One
Weight 25kg
Application Snack,Bakery,Beverage, Food ingredient
Function 1.Good choice as healthy and nutritious snacks.
2.Watermelon seeds are good for everyone because of its brain-filling properties.
3.Watermelon seeds can protect the cardiovascular system which is specially suitable for the old.
4.Watermelon seeds can stimulate appetite for food before meal.
5.Watermelon seeds also can boost immunity because of riching in fat and protein.

Wholesale Supplier of Good Quality Natural Dried Water Melon Seeds for Sale

Black water melon seed
- Moisture:9% max
- Impurity:1%
- Admixture:0.5%
- Package:25kg or 50kg new pp bags

White Melon Seeds
- Purity: 99 %, no empty seeds
- Size: 8MM - 12MM
- Protein: 37.4 %
- Admixture: 1 %
- Oil Content: 50 - 51 %
- Moisture: 5.9 - 9 % MAX
- Color: Golden - White
Red Watermelon Seeds
- Moisture 9%Max
- Admixture 0.5%Max