The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp
- Master perfumers from France's ISIPCA
- Grade 1 premium fragrances following IFRA regulations
- Natural fermentation grain base for safety
- Expertly blended by master perfumers
- Official Disney licensed product
* Specifications:
- Type: Indoor liquid diffuser
- Volume: 100ml/EA
- MOQ: 1,000EA
- Manufactured in: South Korea
- Components: Includes movie moment box, 100ml diffuser, silicone decoration, 6 fiber reed sticks
* Characters :
Mickey, Olaf, Winnie the Pooh, Piglet, Ariel, Belle, Rapunzel, Jasmine, Buzz Lightyear, Alice
We-bogo inc-have established in 1995 at busan korea.
Bogo inc.-as a manufacturer & exporter-supply kinds of "synthetic suede leather" which p.u coated synthetic leather on fabric.
-thickness: 0.5mm-5.0mm(upto customers request)
-p.u coated synthetic leather
-synthetic suede leather
-30-50yds per roll
-these kinds of synthetic suede & microfiber suede leather are useful for clothes, sofa, bag, shoes purpose
28 Wooden Decoration Pieces Suppliers
Short on time? Let Wooden Decoration Pieces sellers contact you.
- antivrus film
- It includes 'zinc' that can protect bacteria.
(FDA-Registered safe material, EPA-Registered safe material)
- It can be used anywhere
- Certified for superior quality and reliability
* substitute of 'LOCTITE 401'
* EU RoHS compliant product
* Non-solvent : Does not contain organic solvents and does not cause hallucinatory effects. Suitable for use in various work environments.
* Cures at room temperature (20C to 30C) and does not require special curing equipment.
* Fast curing that bonds in seconds. Reduces job completion time and facilitates automatic production lines.
* Transparent and low odor. Works well with any use and material to give a clean finish.
* Viscosity (cps) : 90~110 / Tensil-Shear Strength : Above 180 / Initial Cure Speed : 3~5 / Working Temperature : -54~82C
The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact.
2. Explain in detail how the idea would be operated used
The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer,
3. What features do you believe your idea has that makes it unique and appealing?
The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics.
1) Number of Joints for Each Shaft
- In the case where the number of joints is large, a sensation of impact is increased somewhat.
- The case where the number of joints is small is appropriate for golfers with weak swings.
- In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high.
2) Space between Joints
- Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long.
-The kick point goes down toward the tip when the space between the joints in the butt part is long.
- A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased.
3) Structure of Fabric
- Fabric having high elasticity and strength is used, thereby resulting in distinctive performance
4.What need does the idea fulfill?
This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom.
5. Descripbe possible variations of your idea:
The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact.
2. Explain in detail how the idea would be operated used
The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer,
3. What features do you believe your idea has that makes it unique and appealing?
The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics.
1) Number of Joints for Each Shaft
- In the case where the number of joints is large, a sensation of impact is increased somewhat.
- The case where the number of joints is small is appropriate for golfers with weak swings.
- In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high.
2) Space between Joints
- Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long.
-The kick point goes down toward the tip when the space between the joints in the butt part is long.
- A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased.
3) Structure of Fabric
- Fabric having high elasticity and strength is used, thereby resulting in distinctive performance
4.What need does the idea fulfill?
This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom.
5. Descripbe possible variations of your idea:
The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
