Laflor floor tiles provide nano silver technology which is killing germs, fungi and bacteria and nano silver technology is that it also helps to eradicate all known odors. 16 pcs/box(3.31 square meter).
Vinyl flooring.
Laflor floor tiles provide nano silver technology which is killing germs, fungi and bacteria and nano silver technology is that it also helps to eradicate all known odors.
Pvc hose, gas hose, lpg hose, rubber hose, discharge hose, suction hose, braided hose, duct hose.
Logo mat, door mat, advertising mat, bar mat, l.E.D mat, nylon printing mat, nbr mat, pvc mat, pp mat, non-slip mat, non-wooven mat, wilton carpet, yoga mat, car mat, acrylic mat.
Steel bar cutter and bender International Standard Wooden Packing
2 stroke 4 stroke Cylinder bore from 165mm up tp 600mm Wooden box
* Ethyl Alcohol 70% * 500ml * FDA OTC Certification Completed / FDA Cosmetics Completed / FDA Facility Registration Completed
- antivrus film - It includes 'zinc' that can protect bacteria. (FDA-Registered safe material, EPA-Registered safe material) - It can be used anywhere - Certified for superior quality and reliability
* substitute of 'LOCTITE 401' * EU RoHS compliant product * Non-solvent : Does not contain organic solvents and does not cause hallucinatory effects. Suitable for use in various work environments. * Cures at room temperature (20C to 30C) and does not require special curing equipment. * Fast curing that bonds in seconds. Reduces job completion time and facilitates automatic production lines. * Transparent and low odor. Works well with any use and material to give a clean finish. * Viscosity (cps) : 90~110 / Tensil-Shear Strength : Above 180 / Initial Cure Speed : 3~5 / Working Temperature : -54~82C
Consumable Materials, Tools, instruments; pneumatic hydraulic, electrical, electronic, machine-factor, fire-safety and chemical materials, Productive Sub-materials, Boxes (wooden, carton), pallet, PVC, steel drum, Jigs, jig & fixture, bracket, collet, Hand Sanitizer, Hand Clean Gel, Rust-proof Film.
Describe the idea and what it actually does: The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact. 2. Explain in detail how the idea would be operated used The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer, 3. What features do you believe your idea has that makes it unique and appealing? The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics. 1) Number of Joints for Each Shaft - In the case where the number of joints is large, a sensation of impact is increased somewhat. - The case where the number of joints is small is appropriate for golfers with weak swings. - In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high. 2) Space between Joints - Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long. -The kick point goes down toward the tip when the space between the joints in the butt part is long. - A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased. 3) Structure of Fabric - Fabric having high elasticity and strength is used, thereby resulting in distinctive performance 4.What need does the idea fulfill? This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom. 5. Descripbe possible variations of your idea: The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
Golf shaft The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact. 2. Explain in detail how the idea would be operated used The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer, 3. What features do you believe your idea has that makes it unique and appealing? The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics. 1) Number of Joints for Each Shaft - In the case where the number of joints is large, a sensation of impact is increased somewhat. - The case where the number of joints is small is appropriate for golfers with weak swings. - In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high. 2) Space between Joints - Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long. -The kick point goes down toward the tip when the space between the joints in the butt part is long. - A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased. 3) Structure of Fabric - Fabric having high elasticity and strength is used, thereby resulting in distinctive performance 4.What need does the idea fulfill? This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom. 5. Descripbe possible variations of your idea: The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
Industrial Rubber Sheet by EPDM / Nitrile / Neoprene / SBR / Cloth-inserted / Anti abrasion / Gum(Isoprene) / Anti- static with all colors and functions. All products are made in Korea with Korea technology for all industrial
Wooden furniture.Shipping
Note * Product Property - Machine that can lean a 10mx10m tank in 20 minutes - Portable and minimized product (under20kg) - Outstanding perrormance to clean a tank's pond, water fountain & floor * Way to Use - Adjust water level to clean under 30cm~40cm - Grab handle, move cleaner at direction of movement on floor and side of tank - Disconnect power code, dry and keep it after you finish * Precautions - You have to be care about flooding and falling of product when cleaning - Power of water supply pump should be connected into socket of main body. And power of main body should be connected into external socket. - You have to use external socket connected earth leakage breaker Data - Power : Single-Phase 220V, 110V(For domestic) - Cleaner rated output : 180Watt - Water supply pump rated output : 140L/min - Service environment : seawater and fresh water - Maximum usable water level : 30Cm - Earth leakage breaker recommended specification - Voltage : 250VAC - Current : 20A - Sensitivity Current : 15mA Certification Condition * Electricity Safety Certification Complete. * KC Certification Complete * 2015 Patent rutility model registration (Registration Number 20-2015-0003648) Complete * 2016 KC Conformity Assessment Standard Complete The price is possible to negotiate.
Rebar coupler, one-touch rebar coupler.
Beverage and food antibacterial table mat tableware firefighting supplies.
