Busan Bar Equipments Suppliers and Manufacturers

Beryllium Copper, Chrome Copper, Tellurium Copper

Manufacture alloy bars in various shapes and sizes by extruding and drawing of billet. Copper Alloy Bar - Forged Bar : C3771/KSD5101 Copper Alloy Bar - Free Cutting Bar : C3604/KSD5101 Copper Alloy Bar - Naval Bar : C4622/KSD5101 Mainly used to produce vessel parts or shafts due to its high degree of corrosion and seawater resistance.

En590, jet fuel a1, pet coke, pump, valve, cosmetic, mechanical seal, cotton bag, glass bottle, hand sanitizer, hydraulics, cosmetic bottles,socks, paper drink straw, alcohol wipe, other korean products, mask, or nitrile gloves and hand sanitizer and korean cosmetics.

Steel products like steel bars.

Tadano TG751(75TON,1978Year) TG452(45TON.1978Year) TR151(15TON.1978Year).

Describe the idea and what it actually does: The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact. 2. Explain in detail how the idea would be operated used The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer, 3. What features do you believe your idea has that makes it unique and appealing? The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics. 1) Number of Joints for Each Shaft - In the case where the number of joints is large, a sensation of impact is increased somewhat. - The case where the number of joints is small is appropriate for golfers with weak swings. - In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high. 2) Space between Joints - Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long. -The kick point goes down toward the tip when the space between the joints in the butt part is long. - A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased. 3) Structure of Fabric - Fabric having high elasticity and strength is used, thereby resulting in distinctive performance 4.What need does the idea fulfill? This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom. 5. Descripbe possible variations of your idea: The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.

Golf shaft The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact. 2. Explain in detail how the idea would be operated used The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer, 3. What features do you believe your idea has that makes it unique and appealing? The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics. 1) Number of Joints for Each Shaft - In the case where the number of joints is large, a sensation of impact is increased somewhat. - The case where the number of joints is small is appropriate for golfers with weak swings. - In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high. 2) Space between Joints - Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long. -The kick point goes down toward the tip when the space between the joints in the butt part is long. - A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased. 3) Structure of Fabric - Fabric having high elasticity and strength is used, thereby resulting in distinctive performance 4.What need does the idea fulfill? This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom. 5. Descripbe possible variations of your idea: The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.

Microprocessor-contolled Inverter system makes the machine simple structure and easy operation /maintenance. Pre-set ply-counter with automatic stop device. Automatic tension controller allows porper tension and good spreading. Automatic fabric rewinder and unwinder Fabric insertion Cloth edge alignment sensor Non-contact type stop sensor Automatic elevation, speed control and manual speed control are implemented by knob during operation.

Note * Product Property - Machine that can lean a 10mx10m tank in 20 minutes - Portable and minimized product (under20kg) - Outstanding perrormance to clean a tank's pond, water fountain & floor * Way to Use - Adjust water level to clean under 30cm~40cm - Grab handle, move cleaner at direction of movement on floor and side of tank - Disconnect power code, dry and keep it after you finish * Precautions - You have to be care about flooding and falling of product when cleaning - Power of water supply pump should be connected into socket of main body. And power of main body should be connected into external socket. - You have to use external socket connected earth leakage breaker Data - Power : Single-Phase 220V, 110V(For domestic) - Cleaner rated output : 180Watt - Water supply pump rated output : 140L/min - Service environment : seawater and fresh water - Maximum usable water level : 30Cm - Earth leakage breaker recommended specification - Voltage : 250VAC - Current : 20A - Sensitivity Current : 15mA Certification Condition * Electricity Safety Certification Complete. * KC Certification Complete * 2015 Patent rutility model registration (Registration Number 20-2015-0003648) Complete * 2016 KC Conformity Assessment Standard Complete The price is possible to negotiate.

Note ** Product Property - Product that can adjust sea water level and salinity constantly by detecting the level of water tank - LED light ensure well display vision - Product that is currently exported to American Aquarium company. - It can be used every countries handling sea water tank ** Way to Use - Install water sensor 1,2 in the water tank. - Connect sensor and pump into main body of water level controller. - At this time, you can select maximum or minimum water level from position of sensor ** Precautions - Main body of product should be installed at dry area. - Main body of product should be avoided from water - Do not use close to magnetic field Certification Condition ** 2011 Patent utility model registration (Registration Number 20-0454001) Complete ** Power - 220V A.C, 60Hz , 110V A.C. 50,60Hz

Note ** Product Property - A precise thermometer controlling the temperature in accordance with a user's setting by detecting the precise temperature within by ±0.5 F error of measure measurement - It can be also used Temperature Controller when you put in heat pump under the main body - Product that is currently exported to American Aquarium company. - It can be used every countries handling sea water tank ** Precaution - When you use this, you have to connect a stabilizer. like earth leakage breaker - When blackout comes or installing product, you have to check set-up temperature - only for cooling, Operating time of compressor is about 3 minutes. Wait a minute please until it operates. - Main body of product should be installed at dry area - Main body of product should be avoided from water - Do not use close to magnetic field - LO on Display : Short at temperature sensor - Temperature is under 0 C - HI on Display : - Short at temperature sensor - Temperature is under 50 C Data - Length of Sensor : 4M - Usable Power : AC 220V / 60Hz , AC 110V / 50,60Hz - Range of temperature : 0C - 50C (Cooling ; 0 C - 20 C . Heating ; 14 C - 34 C) - Accuracy : Within ± 0.5C - Maximum Current Capacity : For Cooling : 20A. For Heating : 10A

Each kit can diagnosis 100 people. For example, 1,000 kits can diagnosis 100,000 People 1. It can get result whether subject are infected or not in 2 hours. 2. It need some instrument for taking advantage of. like below - Biosystemsâ?¢ 7500 Real-Time PCR Instrument System - Biosystemsâ?¢ 7500 Fast Real-Time PCR Instrument System - Bio-Rad CFX96â?¢ System 3. Basically most of kits are developed in 2 ways. It is RT-PCR method. 4. Components Components SQD52-K020 SQD52-K100 - 2X Onestep qRT-PCR Buffer (2019-nCoV) 200ã?? x 1 ea 1.0mL x 1 ea - Onestep qRT-PCR Enzyme mix (2019-nCoV) 40ã?? x 1 ea 200ã?? x 1 ea - Primer & Probe mixture (2019-nCoV) 60ã?? x 1 ea 300ã?? x 1 ea - Control Template (2019-nCoV) 20ã?? x 1 ea 100ã?? x 1 ea - RNase Free Water 200ã?? x 1 ea 1.0mL x 1 ea 5. Feature - Detect each Subject's Orf1a and N gene of CoVID-19 through using Fluorescence factor then it does Gene Amplification itself 6. Storage - Keep in under -20 degree celcius 7. Expiration - 1 year from being manufactured

1. Detect whether patient infected or not in 10 Minute. 2. But the patient need to wait over 5 days from infected at least. 3. USD 18 means for 1 person. (FOB) 4.Do not require Expert and expensive instrument. 5. PCR kit required to be kept in -20 C degree but this kit can be stored in room temperature. 6. CE certificate secured, ISO 13485 secured.