Item NO : BSK-80W Maximum Power(Wp): 80W Maximum Power Voltage(V): 17.5V Maximum Power Current(A): 4.57A Open Circuit Voltage(V): 21.6V Short Circuit Current(A): 4.81A Size of Module(mm): 1196mm X 556mm X 35mm Size of Glass(mm): 1190mm X 550mm X 3.2mm Size of solar cells(mm): 125mm X 125mm Number of cells(Pcs): 36pcs Maximum System Voltage(V): 1000V Temperature Coefficients of Isc(%): 0.06 %/ Temperature Coefficients of Voc(%): 0.397%/ Temperature Coefficients of Pm(%): 0.549%/ Nominal operating cell temperature: 44.42 Temperature Range: 40- +90 Surface Maximum Load Capacity: 200kgs/m2 Allowable Hail Load: 25mm@80km/h Weight Per Piece (kg): 8.5kgs Frame(Material,Corners,etc): Aluminum Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power. 10pcs per carton and with pallet finally.
Item no : BSK-150W Maximum Power(Wp): 150W Maximum Power Voltage(V): 34.2V Maximum Power Current(A): 4.36A Open Circuit Voltage(V): 43.4V Short Circuit Current(A): 4.94A Size of Module(mm): 1580mm X 808mm X 35mm Size of Glass(mm): 1574mm X 802mm X 3.2mm Size of solar cells(mm): 125mm X 125mm Number of cells(Pcs): 72pcs Maximum System Voltage(V): 1000V/600V Temperature Coefficients of Isc(%): 0.06%/ Temperature Coefficients of Voc(%): 0.397%/ Temperature Coefficients of Pm(%): 0.549%/ Nominal operating cell temperature: 45.32 Temperature Range: 40- +90 Surface Maximum Load Capacity: 200kgs/m2 Allowable Hail Load: 25mm@80km/h Weight Per Piece (kg): 15.0kgs Frame(Material,Corners,etc): Aluminum Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power. Packing: 728pcs/40¡± container , 14 pallets total per container 52pcs solar module per pallet Packing size per pallet :1.65x1.12x1.85m.
Item NO : BSK-50W Maximum Power(Wp): 50W Maximum Power Voltage(V): 17.5V Maximum Power Current(A): 2.86A Open Circuit Voltage(V): 21.6V Short Circuit Current(A): 3.5A Size of Module(mm): 826mm X 556mm X 35mm Size of Module(mm): 820mm X 550mm X 3.2mm Size of solar cells(mm): 125mm X 83mm Number of cells(Pcs): 36pcs Maximum System Voltage(V): 1000V Temperature Coefficients of Isc(%): 0.058 %/ Temperature Coefficients of Voc(%): 0.367%/ Temperature Coefficients of Pm(%): 0.485%/ Nominal operating cell temperature: 44.42 Temperature Range: 40 + 90 Surface Maximum Load Capacity: 200kgs/m2 Allowable Hail Load: 25mm@80km/h Weight Per Piece (kg): 6.0kgs Frame(Material,Corners,etc): Aluminum Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power. 10pcs per carton and with pallet together.
Product Info: Model No: SET-01 Diameter of Outer/Inner Tube: 47/37, 58/47 Length of Tube: 1500/1800, 1800 Thickness of Tube 1.60±0.15, 2.0±0.15 2.2±0.15 Technical Specifications: Iten Specification: Three Targets (operation Temp. around 100°C) Absorptance of Selective Coating (AM1.5): Alpha >= 92.5% Emission of Selective Coating(80°C±5°C): sh = 240m²°C/kW Emission of Selective Coating(80°C±5°C): sh
Application: A. Solar cellphone charger compatible with most cellphone models B. Solar charger for small digital electronics (PDA, MP3, CD player, digital camera etc.) C. Solar battery charger Specification: a. Solar panel: 2.5w multi-crystalline silicon b. Output: DC 5v 500mA c. Material: ABS plastic d. Battery Lithium battery, 1 pc 2400mAh e. Temperature range: -40F to 176F /-40c to 80c. Features: a. No need to change the battery, 5 years lifetime b. Two charging ways by sun and by AC charger c. Charging equipment with 5V input such as Iphone, Ipad, camera, mobilephone,etc d. Ligting and compass function for emergency. Box size: 22x13x3.5cm Carton size: 53x45x22cm Carton gross weight:13kg Carton net weight: 11kg Q'ty/20"fcl;26400pcs Q'ty/40"fcl;52800pcs.
Double load output series (SR-2L) 1. Individual control. 2. Five kinds of load working mode. 3. Adopts double MOS series circuit. 4. PWM charging mode. 5. Double digital LED display. 6. Use industry-specific chip and precision components. Parameter: Model: SR-L series rated charging current: 5A ,10A ,15A ,20A Rated discharging current: 5A ,10A ,15A ,20A Working Voltage:12V ,24V ,12V/24V Auto No load losses:
PWM dimming series (SR-LP) 1. PWM digital dimming technology. 2. Can support 8 sessions dimming. 3. Double digital LED display and key. 4. PWM dimming indication. 5. Use combine with the constant current source. 6. The full power and half power working time can be set separately. 7. Various protections Parameter: Model: SR-LP series rated charging current: 5A ,10A ,15A ,20A Rated discharging current: 5A ,10A ,15A ,20A Working Voltage: 12V ,24V ,12V/24V Auto No load losses:
1. Built-in LED constant current source. 2. With intelligent four phases PWM digital dimming.(power is 100%,75%,50%,25%) 3. IP68 waterproof degree. 4. The max output voltage is 70V, which can drive 20 LED lamps installed in series 5. Various protections. Specification: System voltage: 12V/24V Auto Output current: 330mA ¨C 2310mA No-load loss: 5mA/12V;7mA/24V Solar input voltage: < 55V The Max. charging current: 8A Overvoltage protection: 17.0V; 2/24V Equal charging voltage: 14.6V; 2/24V(25), duration:1h Ascending charging voltage:14.4V; 2/24V(25), duration:2h Float charging voltage: 13.8V; 2/24V (25) Return voltage during charging:13.2V; 2/24V (25) Return voltage for over-discharging:12.5V; 2/24V Over-discharging voltage:11.1V; 2/24V Temperature compensation :-4.0mv//2V; Light-control voltage :Light-control open 5V; light-control close 6V Efficiency of constant current:90% - 96% Current accuracy:+/-2% Light-control judgment time :10min The Max. output voltage:70V Working temperature:-40 to +70; Protection level:IP68 Weight :160g Dimensions ; 825820(mm)(LWH). Package:1pc/box;54pcs/ctn Size: 280*280*220mm.
Single-output series (SR-L) 1. PWM charging mode. 2. Five load working mode. 3. Digital LED display. 3. Over charging protection, over discharging protection, over load, short circuit protection, reverse polarity protection and TVS lightning protection. 5. Temperature compensation function. Parameter: Model:SR-L series rated charging current: 5A 10A 15A 20A 30A 40A Rated discharging current: 5A 10A 15A 20A 30A 40A Working Voltage:12V , 24V , 12V/24V Auto No load losses:
Dual load output and double timeframe series (SR-2LT) 1. Various choices for storage battery. 2. Dual time period function. 3. Various choices for the data of controller. 4. Automatically recognize the period of night to keep the lighting time accurate. Parameter: Model: SR-2LT series rated charging current: 5A ,10A ,15A ,20A Rated discharging current: 5A ,10A ,15A ,20A Working Voltage: 12V ,24V ,12V/24V Auto No load losses:
Our range of solar products includes flashlights for all occasions and solar panels for professional uses.
As the only manufacturer for the BP solar in China, our factory has 12 production lines and we can offer 300MW per year. And we will be much honor to become your stable supplier. We offer a wide range of modules of high quality at unbeatable price, and the products can meet the requirement of IEC61215,IEC61730 and have acquired UL,TUV,VDE,ETL,FM,KEMCO,BBA,CE and GD Golden Sun certification. Besides, We also provide related services on research, consultancy, software development, design, supply, project management, installation, maintenance and commissioning which applied to off-grid and on-grid PV projects (including BIPV system).
High-efficiency photovoltaic module using silicon nitride Mono crystalline silicon cells Performance BP 485 BP 480 BP 475 Rated power (Pmax) 85W 80W 75W Module tolerance 3% Nominal voltage 12V Warranty 25years Qualification test parameters Temperature cycling range: -40¡ãC to +85¡ãC (-40¡ãF to 185¡ãF) Damp heat test: 85¡ãC, 85% relative humidity Front and rear static load test (e.g.: wind): 2,400 Pa (50psf) Front load test (e.g.: snow): 5,400 Pa (113psf) Hailstone impact test: 25mm ? (1 inch) at 23m/s (52mph) Typical electrical characteristics BP485 BP480 BP475 Rated power (Pmax) 85W 80W 75W Voltage at Pmax (Vmp) 17.8V 17.2V 17.4V Current at Pmax (Imp) 4.78A 4.7A 4.3A Short circuit current (Isc) 5.1A 5.1A 4.7A Open circuit voltage (Voc) 22.2V 22.0V 21.8V Temperature coefficient of Isc: (0.0650.015)%/ ¡ãC Temperature coefficient of Voc: - (8010) mV/¡ãC Temperature coefficient of Pmax: - (0.50.05)%/ ¡ãC NOCT: 472¡ãC (Air 20¡ãC; Sun 0.8kW/m2; wind 1m/s) Maximum series fuse rating: 15A (S); 20A (J) Maximum system voltage: 600V (US NEC rating);1000V (T¨¹V Rheinland rating);1000V (IEC 61215 rating).
Performance TBEA4300 Rated power (Pmax) 300W Module tolerance ¡À3% Nominal voltage 24V Warranty 25years Qualification test parameters Temperature cycling range: -40¡ãC to +85¡ãC (-40¡ãF to 185¡ãF) Damp heat test: 85¡ãC, 85% relative humidity Front and rear static load test (e.g.: wind): 2,400 Pa (50psf) Front load test (e.g.: snow): 5,400 Pa (113psf) Hailstone impact test: 25mm ? (1 inch) at 23m/s (52mph) Typical electrical characteristics TBEA4300 Rated power (Pmax) 300W Voltage at Pmax (Vmp) 36.4V Current at Pmax (Imp) 8.3A Short circuit current (Isc) 8.7A Open circuit voltage (Voc) 44.8V Temperature coefficient of Isc: (0.065¡À0.015)%/ ¡ãC Temperature coefficient of Voc: - (0.36¡À0.05) %/¡ãC Temperature coefficient of Pmax: - (0.5¡À0.05)%/ ¡ãC NOCT: 47¡À2¡ãC (Air 20¡ãC; Sun 0.8kW/m2; wind 1m/s) Maximum series fuse rating: 15A Maximum system voltage: 600V (US UL rating);1000V (T¨¹V SUD rating);1000V (IEC 61215 rating).
As the only manufacturer for the BP solar in China, our factory has 12 production lines and we can offer 300MW per year. And we will be much honor to become your stable supplier. We offer a wide range of modules of high quality at unbeatable price, and the products can meet the requirement of IEC61215,IEC61730 and have acquired UL,TUV,VDE,ETL,FM,KEMCO,BBA,CE and GD Golden Sun certification. Besides, We also provide related services on research, consultancy, software development, design, supply, project management, installation, maintenance and commissioning which applied to off-grid and on-grid PV projects (including BIPV system).
Performance BP 3175 BP 3170 BP 3165 Rated power (Pmax) 175W 170W 165W Module tolerance +5/-3% Nominal voltage 24V Limited Warranty 25years Qualification test parameters Temperature cycling range :-40¡ãC to +85¡ãC (-40¡ãF to 185¡ãF) Damp heat test :85¡ãC, 85% relative humidity Front and rear static load test (e.g.: wind):2,400 Pa (50psf) Front load test (e.g.: snow): 5,400 Pa (113psf) Hailstone impact test: 25mm ? (1 inch) at 23m/s (52mph) Typical electrical characteristics BP3155 BP3160 BP3165 BP3170 BP3175 Rated power (Pmax) 155W 160W 165W 170W 175W Voltage at Pmax (Vmp) 34.9V 35.1V 35.2V 35.9V 36V Current at Pmax (Imp) 4.5A 4.6A 4.7A 4.8A 4.9A Short circuit current (Isc) 4.8A 4.8A 5.1A 5.2A 5.3A Open circuit voltage (Voc) 43.9V 44.2V 44.2V 44.2V 44.2V Temperature coefficient of Isc :(0.065¡À0.015)%/ ¡ãC Temperature coefficient of Voc :- (160¡À20) mV/¡ãC Temperature coefficient of Pmax :- (0.5¡À0.05)%/ ¡ãC NOCT : 47¡À2¡ãC (Air 20¡ãC; Sun 0.8kW/m2; wind 1m/s) Maximum series fuse rating: 15A (S); 20A (J) Maximum system voltage:600V (US NEC rating);1000V (T¨¹V Rheinland rating);1000V (IEC 61215 rating)ng).
125mm*125mm Mono- Crystalline Solar Module from PEAK POWER 20W-60w NO. of cells and connections 36.
Model No: HRS-5001 Product Description: Solar street Light Unit Price FOB: USD 635dollar Minimum Order Quantity 2000PCS Solar panel : 1.Material: Polycrystal/monocrystalline silicon 2.Specification : 1.Cell/Monocrystalline silicon solar cells 125*125mm 2. No of cells and connections / 36(4*9) 3. Dimension of module(mm)/1200*535*35 3.Weight: About 7.5kg 4.Power: 80W 5.Lifetime: 20 years 6.Current: 0.04A 7.Voltage: 4V Battery : 1.Material: Ni-Cd 2.Capacity: 112V/100ah 3.Life time: 5-8 years 4.Features: Fully-sealed and maintenance-free lifetime is up to 5 years Applicable temperature: +70- -50 Cell packing and cover adopt ABS, Strengthen resistance fuel(V0 grade) is available to be chosen by user. Low discharge Rubber material adopts special colloid plate and partitions. Controller: 1.Lifetime: 5 years 2.12V/10A 3.Features: Adopting wind generator or solar panel generating energy to make battery constant voltage , control current and charge automatically. It will be at the state of protection according to the checked voltage of the battery. It will protect automatically when the current is high supplied by battery, which make your battery at the best state of charging and protection and is good to Charging saturation. Property is good, visual display, easy to operate. Remark: 1. LED lamp:lifetime is over40000hours, 112V/30W,3600lm 2. Solar panel holder,battery box::liftime is 10years, All steal galvanization spraying-plastic 3. Accessory:cable lines, fastener, terminal 4. The distance between the lights should not be 35m according to the lumen Unit Size: Height: 6m(lamp-post: thickness: 3mm,up/diameter: 70mm,down/diameter:170mm) Flange: 30030012mm light arm: 800mm up: 750-800mm,down:160-170mm£© Light pole: all steel and hot galvanization spraying-plastic Warranty: 15 years Installation Available: We will provide the maunal to you. 40 HQ:light pole 128 pcs£¬2pcs 40 HQ light pole£¬ 20 FT solar panel and battery.
Typically for large-scale photovoltaic off-grid power systems, the specially designed high power photovoltaic intelligent controllers, multi-channel input array of PV modules, convergence to one output. For the battery charge and discharge management, according to the battery pack voltage changes, it automatically controlling components and modules connect or disconnect to maximize the use of solar energy, and also avoids battery overcharge or over discharge problem. In addition, through the power controller multi-input, multi-chip components can be simply connected the controller to solve the traditional large-scale systems require multiple small controllers, complex parallel wiring, to avoid errors caused by lining issues. According to off-grid photovoltaic power system and the different battery design, solar controller are divided into 24V, 48V, 96V, 120V, 192V and 240V and other specifications to meet different users' needs or program designer
156*156 Poly Solar Cells Solar Cell, Multicrystalline Dimension: 156mm * 156mm Thickness: 200um+30um, 180um+30um Front: (-) 1, 9+0, 1mm busbar(silver) Silicon nitride antireflection coating Back: (+)4.3mm*156mm continuous soldering pads (silver/aluminum) Back surface field(aluminum) Productivity: 6 MW/month. Cell Characteristics: 1. High efficiency solar cells with isotropy etched surface 2. Low reverse current, high shunting resistance and dependability 3. Proper handling from incoming inspection through production 4.100% checked for reverse current and visual appearance 5. Small light-induced degradation 6. Calibration by Fraunhofer ISE.
