Product Introduction for self propelled electric transporter Self propelled electric transporter is a rail type transportation vehicle that lays a track on the ground, and the laid rail is generally an I-shaped surface contact rail. Characteristics of self propelled electric transporter The characteristics of the performance of the self propelled electric transporter is that it has a large bearing capacity, is not afraid of dirty and squeaky, easy to maintain, and has a long service life. The self propelled electric transporter can be equipped with industrial wireless remote control devices to achieve artificial remote control. The self propelled electric transporter has a simple structure, easy using and operation. Application of self propelled electric transporter Self propelled electric transporter is commonly used in construction materials, stone materials, metal processing, tunnel engineering, iron and steel metallurgy, hydropower industry, aerospace war industry, ship terminals, automobile machinery and other fields.
Product Introduction The cable drum power rail flat cart is an electric rail transfer cart powered by cable drum. The cable drum power rail flat carts get power AC 380 V through the device of the cable drum which is installed on the bottom of the rail flat carts. The motor is controlled by the power through the AC control system. Using this principle to operate the cable drum power rail flat carts start, stop, go forward, backward and so on. Features This series cable drum power rail flat carts are suitable to be applied in the bed environment, for example, high-temperature and anti-explosion condition. Compared with KPX (battery powered) series rail flat carts, the using time of the cable drum power rail flat carts are unlimited. Compared with KPD (conductor rail powered) series rail flat carts, the cable drum power rail flat carts have no strict requirement for the construction of the rails. Custom Options Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Track or trackless, non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
Produscts Introduce The steerable transfer carts are designed for material transfer in industry fields. There to types of the steerable transfer carts, with rail or without rail. The capacity load of the steerable transfer carts can up to 500 tons. The power supply can be choose, such as low voltage powered, battery powered, cable reel powered, towed cable powered, busbar powered, etc. Both the type of steerable transfer carts and the deck configuration can be customized to suit specific requirements. Deck Configurations The deck configurations can be choosed accoding as demands. Stand-off Integrated screw jack lift table Scissor lift Tilting Flat deck V-deck Fixture cradle Applications Die handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production carts; Portable base for jib arm with spreader beam.
Product Introduce About the 360 degree turning transfer trolley, it is powered by battery, which is installed inside of transfer trolley's body. The battery supply power to the DC motor through the electrical control system.We use this principle to operate the 360 degree turning transfer trolley start, stop, go forward and backward, and so on. The wheel of the 360 degree turning transfer trolley uses high strength polyurethane rubber solid tyre or pneumatic tyre. It can get rid of the dependence on the ground track without destroying infrastructure. The 360 degree turning transfer trolley can walk in the ground, turn to at will without being limited by the space and ground, and also can change the direction of walking and route at any time. It's very suitable for field use and the running routes which are not fixed. Advantages and Features 1. The series 360 degree turning transfer trolley does not need to be installed with track. 2. The power supply of 360 degree turning transfer trolley is a battery, which needs to be charged before it provides electricity. 3. The turning mode of this series 360 degree turning transfer trolley is turning while walking. It can make a 360 degree turn on the ground. 4. Low table, smooth running, high security. 5. Simple and convenient operation, one can operate it. 6. The 360 degree turning transfer trolley can be equipped with safety protection, such as stopping when encountering pedestrians or obstacles and radar, and also a sound alarm system. 7. When the ground is slightly uneven, the 360 degree turning transfer trolley can adjust itself, maintain the body balance. 8. The wheel of this series 360 degree turning transfer trolley is solid rubber wheel. 9. Suitable for operating inside and outside of the workshop. It is a common transportation and handling equipment in the factory. 10. The hydraulic lifting device can be installed on the 360 degree turning transfer trolley as per demands.
Product Introduction About the hydraulic rail transfer cart, it is an electric transfer cart running on rails. In order to meet the specific demands, the cart installed the hydraulic lifting device. The hydraulic rail transfer cart is powered towed cable. Certainly the hydraulic rail transfer cart can be powered by other power supply mode as per demands. Working Principle When the hydraulic rail transfer cart moves, the cable pulls behind the cart. The cable is connected to the ground at one end, while the other is powered by an electric control box on hydraulic rail transfer cart, and then provide the power to the engine. The hydraulic rail transfer cart conduct AC 380V directly into the electrical control system of the hydraulic rail transfer cart to let it start, stop, go forward and backward and so on. Other Addition Device Can be Installed As per the transported cargoes, the V frame, U frame, rubber pad, wooden pad, weighing device...can be equipped. As per the working environment, the anti-high temperature, anti-explosion, anti-rust, anti-skid measure can be adopted properly.
Product Introduction - Electric Rail Transport Carriage The electric rail transport carriage is an electric material transfer carriage powered by cable drum, it is designed for material handling. The electric rail transport carriage gets power AC 380v through the device of cable drum, and the motor is controlled by the power through AC control system that make the electric rail transport carriage to start, stop, go forward, backward, adjust the speed and so on. Features - Electric Rail Transport Carriage Metallurgical Motor - Y series metallurgical motor is suitable for frequent starting. Cable drum - With a large adjustment range for take - up torque, constant tension after adjustment and stability, good synchronization performance. Self-locking ability, no cable slipping - Reasonable structure arrangement, easy installation, use, maintenance, stable and reliable performance. Workshop bay to bay commonly used transfer equipment - This series of electric rail transport carriages are mainly apply in high temperature, harsh, explosion-proof occasions, it usually used in workshop bay to bay transfer. Large load capacity - The using time is unlimit, adapted to any load, high frequency of use. Custom Options - Electric Rail Transport Carriage Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems. Application - Electric Rail Transport Carriage The electric rail transport carriage is suitable for various occasions, for example, steel field, forged field, mold field, heavy industrial, light industrial, paper making field, construction machinery maker, shipyard, port cargo yard, warehouse, assembly line, spray booth, air and space etc. For material handling, the electric rail transport carriage has been widely used with hot market.
Product Description The steel coil billet transfer vehicle is a kind of electric flat vehicle designed for material transfer in workshop or warehouse. This series billet transfer vehicle with V frame, it can aviod the coil material roll down the vehicle. The V frame can be removeable. Advantages Safe and environment friendly Big starting power Small impact to the gear reducer No restriction of the running distance Can running on s-shape rail, arc-shape rails Has no limit on working distance Anti-explosion,Anti-high temperature Stable start, big starting power, long lifetime Available Options Flat decks or fixtures customized for specific loads Custom deck configurations including built-in scales and lift/tilt/rotate capabilities Track or trackless, non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels Fixed or variable speeds with forward/reverse function Drives with acceleration/deceleration capabilities Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems
Products Introduce The motor drive trackless transfer trolley is powered by storage battery. The is installed in the motor drive trackless transfer trolley. The storage batteries supplied the electricity to the DC motor through the electrical control system. Use this principle to operate the motor drive trackless transfer trolley to starting, stopping, going forward, going backward, adjusting the speed and so on. Features 1. Battery power supply, operating distance is not restricted. 2. Can directly running on the concrete. 3. Turn to at will. 4. Change direction and route at any time. 5. Full load uninterrupted for 4-5 hours. 6. Simple operation: remote pilot.
Product Description The electric material transfer trolley is battery powered. The batteries are installed in the electric material transfer trolley. The batteries supply electricity to the DC motor through the electrical control system. We use this principle to operate the electric material transfer trolley, for example, start, stop, go forward and backward, adjust the speed and so on. This series electric material transfer trolley can get rid of the limitation of cables and remote control, which makes the operation more convenient, safe, which can be applied in long distance rail transit system. Product Characters 1. This series of electric material transfer trolley very safety and flexibility 2. Unrestricted operating distance 3. Speed adjustable 4. Low noise 5. Save labor costs 6. Environmental protection 7. Easy operation 8. Easy to repair 9. The requirements for laying the track are not high 10. Strong bearing capacity Working Environment 1. Environment temperature: -20°C-40°C 2. Environment Humidity: Relative Humidity 70% 3. Environment PH Degree: Working in a Neutral or Approaching Neutral 4. Environment Electrical Sustainability: 25% 5. Air Cleanliness: Non-corrosive, non-flammable,non-explosive gas .com
Product Introduction - Rail Steerable Transfer Vehicle The rail steerable transfer vehicle is an electric material transfer vehicle powered by cable reels, it is designed for material handling. The rail steerable transfer vehicle gets power AC 380v through the device of cable reel, and the motor is controlled by the power through AC control system that make the rail steerable transfer vehicle to start, stop, go forward, backward, adjust the speed and so on. We adopt the magnetic coupling cable reel, it can make sure that there is no force on the cable and the cable can be wound and released evenly. If it is used in short distance transportation, it is a better choice without limited time. Of course, our product includers different power, the proper solution will be recommended to you after learning your requirements. Features - Rail Steerable Transfer Vehicle Metallurgical Motor - Y series metallurgical motor is suitable for frequent starting. Cable reel - With a large adjustment range for take - up torque, constant tension after adjustment and stability, good synchronization performance. Self-locking ability, no cable slipping - Reasonable structure arrangement, easy installation, use, maintenance, stable and reliable performance. Workshop bay to bay commonly used cars - This series of rail steerable transfer vehicles are mainly used in high temperature, harsh, explosion-proof occasions, it usually used in workshop bay to bay transfer. Large load capacity - The using time is unlimit, adapted to any load, high frequency of use. Custom Options - Rail Steerable Transfer Vehicle Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
Product Introduction The automated slab transfer trolley is powered by towed cable, it is used to transfer material in factory. The specific funcations can be customized according customer's demands. Working Principle When the slab transfer trolley moves, the cable pulls behind the trolley. The cable is connected to the ground at one end, while the other is powered by an electric control box on transfer trolley, and then provide the power to the engine. The slab transfer trolley conduct AC 380V directly into the electrical control system of the trolley to let it start, stop, go forward and backward and so on. Customized Options Deck Railings Wood Decking Material Screw-Jack Lift Deck Paint Color (customer specified) Rail Guides Floor Rail End Stops Urethane Wheels (not available on guided carts) Live Axle
Product Introduction Industrial rail ferry cart usually works in the pit which table size is flush with the ground, the running direction of the rail ferry cart with the transfer cart working direction is a cross. The rail is installed on the top of the cart top is mainly used for ferrying the rail transfer cart instead of moving cargo. This series of transfer cart can be effectively complete the transfer of objects in a limited factory building. Working Principle This kind of cart is powered by battery, the batteries supply electricity to the DC motor through the electrical control system to start, stop ,go forward and backward, adjust the speed and so on. Advantage 1. Convenient maintenance: Lubricate some joint active parts, such as wheels, bearings, etc. Others mainly focus on inspection and cleaning. 2. Shorter shutdown maintenance time: Convenient and quick, short downtime, low maintenance costs. 3. Environmental impact equal to zero: Low noise, no emissions. 4. The control performance is better: The operation control is simple and convenient, and it is flexible, which greatly reduces the labor intensity of the operator, and it is very helpful for improving the working efficiency and the accuracy of the work. 5. Long service life of battery: The service life of the battery is 1500 charge and discharge cycles, and the working hours are about 12,000 hours.
Brief introduction for steel factory coil rail car steel factory coil rail car is widely used in the cold and hot steel rolling workshop production line. Steel coil is heavy and easy rolling, considering the security problem in transportation,according to this situation and the customer's requirements, our research team developed a kind of steel factory coil rail car. Features of steel factory coil rail car 1.The steel factory coil rail car adopts DC motor which can stable starting; 2.The body of the steel factory coil rail car is designed by box beam structure which not easily to deformation; 3.Wheels stable operation and easy maintenance; 4.When running, reducer working noise is very small; 5.Car table adopts V-type support to fixed the coil firmly on the steel factory coil rail car, 6.The V-type support also can choose adjustable type to meet handling different coil diameter. Advantages of steel factory coil rail car Safety and flexibility; High efficiency and stable start; Long lifetime and durable, at least 20 years of lifetime; Simple operation; Using frequency; Environmental protection.
Product Introduction for mould rail forging wheel The mould rail forging wheel can divide into different types, such as single flange wheel,double flange wheel,hollow wheel sets and solid wheel sets.The material and size of the mould rail forging wheel can be customized according to your requirements. Features of mould rail forging wheel High tolerance ; High tensile strength ; Safety and flexibility ; Large wheel pressure and Heavy Load capacity ; High strength & durable to use.
Products Introduction The battery steerable transfer cart is an electrc transfer cart powered by battery, it is designed for material transfer in industry fields. The capacity load of the battery steerable transfer cart can up to 500 tons. There two types of the battery steerable transfer carts, running on rail or running on ground. Both the type of battery steerable transfer cart and the deck configuration can be customized to suit specific requirements. Specifications Load Size/Shape: Customer supplied Load Weight: Up to 500 tons Cart Travel Speed: 0-40m/mim Power: Battery Applications Transport of heavy payloads between crane bays Transport of heavy loads through assembly line processes (I.e. railcar, construction equipment, agricultural equipment, truck, wind generator components, mining equipment, etc.) Transport of heavy loads through fabrication processes. Transport of coil steel, steel blank stacks, heavy plate stacks, etc., from storage to the process area.
Product introduction for busbar powered motorized transfer trolley The kinds of motorized transfer trolley is powered by busbar. The sliding line is usually installed between two rails or one side. The slider takes AC 380V from the sliding line to provide the motor through the electric control cabinet system. , to achieve the motorized transfer trolley to forward, back, start, stop and other operations. The power supply mode is as follows: a trench is opened on the side of the rail, a safety wire is installed in the trench, and a cover plate is laid on the trench. When the motorized transfer trolley is in operation, the cover is lifted by a flap device mounted on the flat cart, and the slider power is used to supply power to the motorized transfer trolley, and the motorized transfer trolley is automatically returned to the ground through the rear cover plate. Performance characteristics for busbar powered motorized transfer trolley The installation method of the trolley rails in this series is not fixed, and can be installed in the track or on one side of the trench or on the nearest wall according to the site layout. Suitable for medium and long distance, frequent start and stop, work environment with high work intensity. Usage and maintenance for busbar powered motorized transfer trolley During the use of the sliding wire, it should be taken to keep it free from foreign matter in the sliding wire. If there is any foreign matter, it should be cleaned in time to avoid poor contact and affect the use of the motorized transfer trolley. If you find that the cable insulation is damaged during use, replace the cable with new one.
Product Introduction The mold transport cart is designed for die or mold handling. The mold transport cart is powered by dragged cable. The capacity load of the mold transport cart can reach 500 tons. Depending on the size of the die or mold, you can choose the size and load capacity of the mold transport cart. Working Principle When the mold transport cart moves, the cable pulls behind the mold transport cart. The cable is connected to the ground at one end, while the other is powered by an electric control box on mold transport cart, and then provide the power to the engine. The mold transport cart conduct AC 380V directly into the electrical control system of the mold transport cart to let it start, stop, go forward and backward and so on. Performance Characters 1. As a common tool for short-distance transit across the factory, the mold transport cart has a simple structure, low production cost. 2. This series mold transport carts are suitable to be used in the bad environment, for example, high-tempeture and anti-explosion condition. Compared with KPX series cart, the using time is not limited. 3. Compared with KPD series cart, it has no strict requirement on the rail's installation. Compared with KPJ series cart, the cost is lower. 4. Mesa size, the gauge can be customized. Various non-standard mold transport cart can also be obtained. 5. Choose import wireless remote control, control the distance of 100 meters.
Product Description Cross-bay steering transfer cart is a kind of rail transfer cart which can solve the problem of product transportation between factory spans. It is also called rail flat cart, electric rail transfer cart and so on. The cross-bay steering transfer cart is running on the rails and powered by battery. Working Principle The battery is installed in the cross-bay steering transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the cross-bay steering transfer cart to start, stop, go forward, backward, adjust the speed and so on. Safety Device 1. Acousto-optic warning lamp(When the cross-bay steering transfer cart is running, it will ring up to warn others) 2. Urgent stop button(When encountering unexpected situations, pressing the emergency stop button, the cross-bay steering transfer cart will immediately stop to ensure safety) 3. E-stops (The induction switch equipped on the front and rear of the cross-bay steering transfer cart, the cart will automatically stop when induction of obstacles, to ensure safe)
Product Details Usage: Industrial, Workshop, Warehouse, Port Wheel Type: Polyurethane Wheels Color: Customized Running Speed: 0-40 m/min (Adjustable) Load Capacity: 1-500 Ton (Can Be Customized As Per Demands) Wheel Amount: 4/6/8 Application: Materials Transfer Working Principle The trackless material transfer cart is battery powered. The battery is installed in the trackless material transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the trackless material transfer cart to start, stop, go forward, backward, adjust the speed and so on. Features 1. Maintenance-free high-power AC drive system, providing reliable driving power; large-capacity battery, strong endurance. 2. Unlimited remote control, simple operation, safe and stable. 3. Standard imported controllers, meters, reliable, durable; waterproof and dustproof plug-in, to give the circuit a reliable protection, greatly reducing the electrical fault. 5. Emergency power off switch, turn speed limit, undervoltage protection, and other personnel safety features to ensure traffic safety. 6. Polyurethane rubber wheel, no damage to the ground, the body of high stability, not easy to slip. 7. Optional side pull battery, large capacity battery; support non-standard customization, such as the weight, body size and so on. Applications Die handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production trolleys;
Produscts Introduce The trackless transport cart is a kind of material handling cart without rail. Large capacity, stable start, do not rely on rail, tow-way travel. Hydraulic steering mechanism ensures tight turning radius, enabling 360° turn in a small space. The trackless transport cart can divided into two types, electric powered trackless transport cart and no powered trackless transport cart. Advantages 1. No need install rail, no any damage to the floor. 2. It can realized double way moving and 360 degree turning. 3. Heavy loading capacity. 4. Small turning radius, flexible operation. 5. Braking distance is short, and have alarming system. Applications Transport of heavy payloads between crane bays Transport of heavy loads through assembly line processes (I.e. railcar, construction equipment, agricultural equipment, truck, wind generator components, mining equipment, etc.) Transport of heavy loads through fabrication processes.
