Total station, video scope, flaw detector, xrf/libs analyzer, thermal imager, ndt equipment, 3d scanning, surveying equipment, laboratory equipment and other tester/analyzer.Export
The HiPer HR GNSS receiver overcomes field challenges with a unique blend of technologies. If you are under tree cover, or can't get the pole plumb, or need to range widely from your base, or you need superb accuracy, or work in wet conditions, or all of the above, youâ??ll be free to do your best work.
Features include
Next generation Fence Antenna for superior reception
Rugged, waterproof IP67 environmental design
Cellular, LongLink and Radio communications all integrated
452 Universal Tracking channels
Unique 9-axis TILT compensation
Internal Wi-Fi and multi-spectrum Bluetooth
HiPer HR Specifications
GNSS Tracking
Number of Channels: 452 with patented Universal Tracking Channel Technology
GPS, GLONASS, Galiileo, BeiDou, QZSS, SBAS, L-Band
Satellites Tracked: All in view
Update/Output rate: Up to 20 Hz
Communications
Radio: UHF(410-470MHz), SS (915 MHz)
LongLink: Yes
I/O Communications: Internal Cell modem, Wi-Fi, Bluetooth
Memory/Data Storage: Up to 8 GB
Power and Electrical
Power: External power, 6to28VDC, 2 x Internal batteries, 3.7 V, 2900 mAh each
Operation Time: Up to 9 hours with removable batteries
Physical and Environmental
Operating Temperature: -40�°C to 80�°C
Waterproof: IP67
Drop Test: 2 meter pole-drop
Weight: 1kg
Accuracy
Static/Fast Static:: H: 3 mm 0.4 ppm, V: 5 mm 0.5 ppm
Precision Static: H: 3 mm 0.1 ppm, V: 3.5 mm 0.4 ppm
RTK (L1 L2): H: 5 mm 0.5 ppm, V: 10 mm 0.8 ppm
RTK, TILT Compensated:H: 1.3 mm/
This main board IPB100 is suitable for Seiko ColorPainter 100S printers.
This is the original Seiko part (number U00097340501 replacing number U000973405**).
SKU: U00097340501
Manufacturer part number: U00097340501
Printing Method
Printing Technology FINE: Full-Photolithography Inkjet Nozzle Engineering
Maximum Resolution 2400 x 1200 dpi
Ink Type Pigment-based
Ink Cartridge Configuration 8 individual cartridges
Number of Nozzles 1,536 nozzles x 12 channels
Total: 18,432
Minimum Ink Droplet Size 4 pL
Media Handling
Paper Handling Front-loading roll feed (one roll, front output)
Front-loading manual feed (front output)
Multifunction roll system (second roll, bi-directional take-up system)
Media Width 8-44" / 20.3-111.8 cm
Borderless Printing Width 10" / 25.4 cm, 14" / 35.6 cm, 17" / 43.2 cm, 24" / 61 cm, 36" / 91.4 cm, 42" / 106.7 cm, 44" / 111.8 cm, B2 20.3" / 51.5 cm, A1 23.4" / 59.4 cm, A0 33.1" / 84.1 cm, B0 40.6" / 103 cm
Minimum Length 8" / 20.3 cm
Maximum Length Roll Paper: 59' / 18 m
Cut Sheet: 63" / 160 cm
Media Thickness 2.8-31.5 mil / 0.07-0.8 mm
Margins Roll Paper
Top: 0.12" / 3 mm
Bottom: 0.12" / 3 mm
Side: 0.12" / 3 mm
Borderless
Top: 0" / 0 mm
Bottom: 0" / 0 mm
Side: 0" / 0 mm
Cut Sheet
Top: 0.12" / 3 mm
Bottom: 0.79" / 20 mm
Side: 0.12" / 3 mm
Maximum Roll Diameter 6.7" / 17 cm
Core Sizes 2 or 3" / 5.1 or 7.6 cm
Connectivity
Interfaces USB 2.0
Ethernet (10/100/1000Base-T/TX)
Wi-Fi (IEEE 802.11b/g/n)
Direct Printing USB
Wi-Fi
OS Compatibility Windows 70, 8.1, 8, 7, Vista (32/64-bit)
Mac OS X 10.7.5-10.11.x
Memory 3 GB
Hard Disk Capacity 320 GB
Print Languages Swift Graphic Raster (SGRaster)
Physical
Control Panel 3.5" / 8.9 cm color touchscreen LCD
Power Requirements 100-240 VAC
Power Consumption Maximum: 107 W
Standby: 1.8 W
Off: 0.5 W
Certifications ENERGY STAR
RoHS Directive
Acoustic Noise 49 dB(A)
Operating Conditions Temperature: 59 to 86�°F / 15 to 30�°C
Humidity: 10 to 80%
Dimensions 46 x 62.7 x 38.7" / 116.8 x 159.3 x 98.3 cm with basket open
Weight 267 lb / 121 kg
This printhead GEN5 (MH5420/5440) is suitable for Mimaki JFX500-2131 & UJV500-160 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022626 replacing M013497, M016979 and M015068).
The following items are expressly excluded from warranty coverage:
defects in printers related, in any way, to the use of any non-original or DIGINK inks or ink cartridges and nozzle clogging
defects related to misuse, abuse, accident, neglect, lack of use, or improper storage when not in use for extended periods
defects related to failure to perform periodic maintenance as specified in the user documentation; operation for unintended purposes
defects related to improper loading of media
all other defects, failures or damage not considered manufacturing defects
defects related to third-party applications, software, parts, components, or peripheral devices, including any bulk ink system.
defects that are merely cosmetic in nature.
Product Specifications
Dimensions: 89 x 25 x 69 mm (excluding cables)
Head materials: SST, Nickel alloy and Epoxy Adhesive
Nozzle plate surface: Coated SST
Number of nozzles: 4 x 320 nozzles
Nozzle spacing: 0.1693 mm
Nozzle density: up to 600 npi
Piezo yype: D33 Stacked PZT
Temperature control: Integrated Heater and Thermistor
Operator temperature range: Up to 80�° C
Native drop volume: 7 pl
Drop volume range: 7 - 35 pl
Drop velocity: 7 m/s
Jetting frequency: Up to 60 kHZ
Life: 100 billion actuations per nozzle
This printhead carries a manufacturer warranty.
Country of origin : Japan
Compatible firmware:
UJV55-320 FW Ver. 2.5 or later
SIJ-320UV FX Ver. 1.90 or later
SWJ-320EA FW Ver. 1.30 or later
UJV500-160 FW Ver. 2.00 or later
JFX500-2131 FW Ver. 3.40 or later
More Information Please Visit our website official store GAOLITOPRINTER,
many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys
, Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
Trimble 5800 GPS Base or Rover 450-470 MHz Receiver
Trimble 5800 GPS Rover Receiver 450-470 MHz w/ Options...
- CMR Inputs
- CMR Outputs
- RTCM Inputs
- RTCM Outputs
- Data Collector
- Binary Outputs
- Data logging
- Bluetooth
- UHF Transmit
- Software Version 2.32
- Boot Version 2.30
- 450 - 470 MHz Radio Module P/N: 59400-66
- Factory Serviced
SKU: GPS47
Item ID: X3190-L/T*
Condition: Refurbished
Warranty: 90 Day Exchange
Trimble 5800 GPS Receiver The Trimble 5800 GPS receiver provides reliability and simplicity for basic surveying tasks. You can trust that the proven design of the Trimble 5800 will perform under the toughest conditions. Integrated System Because the Trimble 5800 GPS receiver's components are completely integrated, the system is lightweight and ergonomic and completely cable-free. 2 MB of internal memory makes collecting data for postprocessing extremely easy and efficient, whether for static or kinematic (stop-and-go) surveying. Advanced Technology The Trimble 5800 GPS system offers advanced Trimble GPS technology. It is a 24-channel dual-frequency GPS receiver, containing Trimble's proven Maxwell technology for robust tracking in difficult GPS environments. Two additional channels for WAAS and EGNOS tracking let you perform real-time differential surveys to GIS grade without a base station. The dual-frequency Trimble antenna enhances the tracking capabilities of the Trimble 5800 the patented four-point antenna feed provides submillimeter phase center stability for precise results. The position of the UHF radio antenna mounting further increases accuracy by being out of the GPS line-of-sight, reducing multipath and avoiding interference with the GPS antenna. For rover communications use the built-in 450 or 900 MHz radio, or use an external radio, cell phone or wireless packet data modem. For extended coverage and comprehensive error checking when roving, the Trimble 5800 works with signals from multiple base stations transmitting on the same radio channel. For even larger area coverage, at highest accuracies, the Trimble 5800 works with Trimble VRS networks. Integrated Bluetooth wireless technology enables cable-free communication between the receiver and your Trimble controller. Built For The Field As a rover, the Trimble 5800 is not only lightweight and cable-free; it also consumes minimal power. Two miniature batteries will power the receiver for up to 11 hours at least enough for a full working day. Environmentally rated to IPX7, and submersible to a depth of 1 m, the Trimble 5800 is rugged enough for any job. It can withstand a drop of up to 2 m on to a hard surface. Trimble 5800
23 Motor For Electronic Instruments Suppliers
Short on time? Let Motor For Electronic Instruments sellers contact you.
