Thermal transfer ribbon.Cfr delivery worldwide
This generic CR Belt Assy is suitable for Mutoh Valuejet 1624 printers. This is a high quality generic part that corresponds to Mutoh part number DG-43002. This CR Belt Assy is 475cm long and 1.5cm wide. SKU: DG-43002 Manufacturer part number: DG-43002 More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
Printing Method Printing Technology FINE: Full-Photolithography Inkjet Nozzle Engineering Maximum Resolution 2400 x 1200 dpi Ink Type Pigment-based Ink Cartridge Configuration 8 individual cartridges Number of Nozzles 1,536 nozzles x 12 channels Total: 18,432 Minimum Ink Droplet Size 4 pL Media Handling Paper Handling Front-loading roll feed (one roll, front output) Front-loading manual feed (front output) Multifunction roll system (second roll, bi-directional take-up system) Media Width 8-44" / 20.3-111.8 cm Borderless Printing Width 10" / 25.4 cm, 14" / 35.6 cm, 17" / 43.2 cm, 24" / 61 cm, 36" / 91.4 cm, 42" / 106.7 cm, 44" / 111.8 cm, B2 20.3" / 51.5 cm, A1 23.4" / 59.4 cm, A0 33.1" / 84.1 cm, B0 40.6" / 103 cm Minimum Length 8" / 20.3 cm Maximum Length Roll Paper: 59' / 18 m Cut Sheet: 63" / 160 cm Media Thickness 2.8-31.5 mil / 0.07-0.8 mm Margins Roll Paper Top: 0.12" / 3 mm Bottom: 0.12" / 3 mm Side: 0.12" / 3 mm Borderless Top: 0" / 0 mm Bottom: 0" / 0 mm Side: 0" / 0 mm Cut Sheet Top: 0.12" / 3 mm Bottom: 0.79" / 20 mm Side: 0.12" / 3 mm Maximum Roll Diameter 6.7" / 17 cm Core Sizes 2 or 3" / 5.1 or 7.6 cm Connectivity Interfaces USB 2.0 Ethernet (10/100/1000Base-T/TX) Wi-Fi (IEEE 802.11b/g/n) Direct Printing USB Wi-Fi OS Compatibility Windows 70, 8.1, 8, 7, Vista (32/64-bit) Mac OS X 10.7.5-10.11.x Memory 3 GB Hard Disk Capacity 320 GB Print Languages Swift Graphic Raster (SGRaster) Physical Control Panel 3.5" / 8.9 cm color touchscreen LCD Power Requirements 100-240 VAC Power Consumption Maximum: 107 W Standby: 1.8 W Off: 0.5 W Certifications ENERGY STAR RoHS Directive Acoustic Noise 49 dB(A) Operating Conditions Temperature: 59 to 86�°F / 15 to 30�°C Humidity: 10 to 80% Dimensions 46 x 62.7 x 38.7" / 116.8 x 159.3 x 98.3 cm with basket open Weight 267 lb / 121 kg
This printhead GEN5 (MH5420/5440) is suitable for Mimaki JFX500-2131 & UJV500-160 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022626 replacing M013497, M016979 and M015068). The following items are expressly excluded from warranty coverage: defects in printers related, in any way, to the use of any non-original or DIGINK inks or ink cartridges and nozzle clogging defects related to misuse, abuse, accident, neglect, lack of use, or improper storage when not in use for extended periods defects related to failure to perform periodic maintenance as specified in the user documentation; operation for unintended purposes defects related to improper loading of media all other defects, failures or damage not considered manufacturing defects defects related to third-party applications, software, parts, components, or peripheral devices, including any bulk ink system. defects that are merely cosmetic in nature. Product Specifications Dimensions: 89 x 25 x 69 mm (excluding cables) Head materials: SST, Nickel alloy and Epoxy Adhesive Nozzle plate surface: Coated SST Number of nozzles: 4 x 320 nozzles Nozzle spacing: 0.1693 mm Nozzle density: up to 600 npi Piezo yype: D33 Stacked PZT Temperature control: Integrated Heater and Thermistor Operator temperature range: Up to 80�° C Native drop volume: 7 pl Drop volume range: 7 - 35 pl Drop velocity: 7 m/s Jetting frequency: Up to 60 kHZ Life: 100 billion actuations per nozzle This printhead carries a manufacturer warranty. Country of origin : Japan Compatible firmware: UJV55-320 FW Ver. 2.5 or later SIJ-320UV FX Ver. 1.90 or later SWJ-320EA FW Ver. 1.30 or later UJV500-160 FW Ver. 2.00 or later JFX500-2131 FW Ver. 3.40 or later More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This RHOS power supply fits Mimaki JV3 / TX / JF / UJV printer. This is the original Mimaki part (number M013516 replacing E300374, E300442, E300264 and E300236). Printer compatibility Mimaki DS-1600 Mimaki DS-1800 Mimaki GP-604 Mimaki JF-1610 Mimaki JF-1631 Mimaki JFX-1615 Mimaki JFX-1615Plus Mimaki JFX-1631 Mimaki JFX-1631Plus Mimaki JV2-130 Mimaki JV2-160 Mimaki JV2-180 Mimaki JV2-90 Mimaki JV22-130 Mimaki JV22-160 Mimaki JV3-130S Mimaki JV3-130SL Mimaki JV3-130SP II Mimaki JV3-160S Mimaki JV3-160SP Mimaki JV3-250SP Mimaki JV3-75SP II Mimaki TX2-1600 Mimaki UJF-3042 Mimaki UJF-3042FX Mimaki UJF-3042HG Mimaki UJF-6042 Mimaki UJV-160 More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This Kit F/S Printhead CE2 is suitable for Oc Arizona 550 and Fujifilm Acuity Advance HS HD3545 printers. This is the original Oc�© part (number 3010112660) - Toshiba CE4 printhead. This Kit F/S Printhead CE2 is suitable for Oc�© Arizona 550 and Fujifilm Acuity Advance HS HD3545 printers. This is the original Oc�© part (number 3010112660) - Toshiba CE4 printhead. The following items are expressly excluded from warranty coverage: - defects in printers related, in any way, to the use of any non-original or DIGINK inks or ink cartridges and nozzle clogging - defects related to misuse, abuse, accident, neglect, lack of use, or improper storage when not in use for extended periods - defects related to failure to perform periodic maintenance as specified in the user documentation; operation for unintended purposes - defects related to improper loading of media - all other defects, failures or damage not considered manufacturing defects - defects related to third-party applications, software, parts, components, or peripheral devices, including any bulk ink system. - defects that are merely cosmetic in nature. Product Specifications Technology: Multi-drop grayscale micro-piezo Grayscale levels: 16 max Active nozzles: 636 Print swathe width: 53.7 mm Nozzle pitch: 84.5 �¼m Native resolution: 300 dpi Printhead weight: 174 g Dimensions: 85 x 74 x 33 mm Drop volume: 6 - 90 pl Typical firing frequency: 2.8 - 28 kHz Ink Compatibility: oil-based pigment ink and UV curable pigment ink This printhead carries a manufacturer warranty. Printer compatibility Canon Oc�© Arizona 550 GT Canon Oc�© Arizona 550 XT Fujifilm Acuity Advance HS HD3545 Fujifilm Acuity Advance HS HD3545 X2 More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
Print Technology: Direct Thermal & Thermal Transfer Print Resolution: 300 dpi Print Speed: 11.8 in/s For Label Sizes: 6.6 ft (non-peel mode), 9.8 in (peel mode) in Color Capability: 1 Color Maximum Outside Diameter: 8" Justification: Left Aligned Connectivity: Ethernet, RS232, USB 2.0, USB Host Weight: 22.0000 Brand: Brady Model: i7100 Application: General Identification Included: 2 ribbon takeup cores (1" dia), LabelMark 6 Label Creation Software, Owners manual (English), Power cord (U.S. type B plug), Printer, Product CD w/driver, config/settings manual, owners manual in other languages, USB cable Warranty: 5 years
Printer Type: Industrial Printer Print Technology: Direct Thermal & Thermal Transfer Print Resolution: 400 dpi Print Speed: Up to 10 in/sec (254 mm/sec) For Label Sizes: Width: Up to 4in (120mm) Color Capability: 1 Color Maximum Outside Diameter: 8" Connectivity: Ethernet, 9 Pin RS-232, USB Weight: 41.2200 Brand: Honeywell Special Properties: Universal Firmware, Fixed Sensor, Peel/Present, 24/7 Operation, Flash Memory 16 MB, SDRAM Memory 32 MB, Ribbon Wound In/Out, Fingerprint IPL Emulation, Auto-Switching Power, Rewind Linear Only
Maximum modeling area: 483 x 305mm (19 x 12") Support of HP-GL*1 and G code*2 enables the NC-5 to work with vareious modeling software / CAD software and CNC commands. Mechanical Resolution: 0.5m High Horse Power: 1HP(750w) Simultaneous 3-axis linear interpolation command for smooth and speedy 3D modeling. Models on metals as well as plastics. Rigid construction and precisely controlled servo motors for all X, Y and Z axes provide very accurate modeling. Coolant can be applied while modeling. Collet spindle can use modeling tools (up to 10mm (0.4") shank diameter) T-slot table and Vacuum table options are available. Z stroke is 110mm (4.3") Handy operation panel for ease of use.
The desktop engraving machine ME-II Series provides advanced functions, e.g. 3D modeling with 3-axis interpolation, and a sensor is installed for controlling engraving depth. To match necessary workpiece size, three different machine sizes are offered. Plotting and cutting commands are installed. Various CAD data are supported. Three different machine sizes, A4, A3 and A2-plus. Servo motors are installed to X, Y and Z axes and deliver high torque and precision engraving. Wide range of applications including name plates, control panel covers and prototype making.
This power unit is suitable for Mimaki UJF printers. This is Mimaki original part (number EMC-13HK-3D). PRINTER COMPATIBILITY Mimaki UJF-3042FX
VUTEk GS2000 VUTEk GS2000LX VUTEk GS3200 VUTEk GS3250 VUTEk GS3250LX VUTEk GS3250r VUTEk GS5000r
The UJV500-160 can print at high speeds up to 60 m2/h. A speed of 24 m2/h can be reached while printing with white ink. The number of print heads and nozzles has been updated. The six 2 inch print heads are aligned in a staggered array, which is optimized to eject ink effectively. * 1 headï¼?1,280 nozzles (320 nozzles X 4 rows), In total: 7,680 nozzles (1,280 nozzle X 6 heads) Print Speed The print speeds above are the results of printing on media with a 1,610mm width. Depending on the firmware setting, the print speeds above may not be reproduced.
Boost the productivity of your office with the print, scan, copy, and fax capabilities of the VersaLink B405/DN All-in-One Monochrome Laser Printer from Xerox. A fast and efficient printer, the B405 can reach speeds of up to 47 ppm with ease and features duplex printing at up to 24 ppm. Your documents will be sharp with a resolution of 1200 x 1200 dpi and you can print a variety of common sizes from 3 x 5" up to 8.5 x 14". Also, by offering both a 150-sheet bypass and a 550-sheet input tray, users will have plenty of media before running out and can load multiple types at the same time. Scanning, copying, and faxing are made possible through the use of an 8.5 x 14" flatbed and a 60-sheet reversing ADF. An optical scan resolution of 600 x 600 dpi is useful for producing sharp imagery in a variety of file formats and built-in character recognition can help users quickly search files after they are scanned. For easy, intuitive operation the B405 has a large 5" touchscreen LCD. Also, an easy-access USB port is available for walk-up printing and scanning. This unit is designed to last with a rated monthly duty cycle of 110,000 pages. Additionally, it features both USB 3.0 and Ethernet connectivity.
The MIMAKI LUS-150 UV-curable ink is cured and adhered to the media or substrate by UV radiation. The print is already dried when it comes out of the printer, allowing a short delivery request to be met. Printing on non-absorbent materials, including plastic, glass, and metal, is available. To give shape to ideas, Mimaki offers a range of UV-curable ink products to meet demands from various industries, ranging from decorating and architecture to industrial design. Supported Mimaki model: JFX200-2513 JFX200-2513 EX JFX200-2531 JFX500-2131 UJF-3042MkII UJF-3042MkII EX UJF-6042MkII UJF-A3MkII UJV500-160
Various Chinese solvent printers use the Epson DX5 solvent printhead. This DX5 printhead allows fast speed, high-resolution printing with eco-solvent or mild solvent inks. The Epson DX5 original printhead is delivered in a sealed Epson package. This DX5 printhead model is compatible with all DX5 based Chinese printers and doesnt require any decoder. This is the original Epson DX5 printhead; it is not modified nor coded. This printhead should not be used on Mutoh Valuejet or Mimaki JV33 / JV5 printers as it has different voltages and therefore offers a different image quality. PPHMUVJ1204 and PPHMIJV5006 should be used on Mutoh and Mimaki printers.
The DK20 16" x 20" is Geo Knight's largest clamshell heat press that opens for full access to the lower bottom table. It is important to note that the back of the heat platen rises above and away from the bottom table, providing enhanced access compared to other clamshell heat presses. The frame support allows operators to slide shirts over the table with complete drape space around and underneath the loading area. Interchangeable bottom tables for smaller pressing areas are available. This press is ideal for environments with space limitations. The DK16 can be easily upgraded to an automatic release press with the "Pop-Up" upgrade. This allows for faster semi-automatic garment production at a very reasonable price.
The Model 8020 Pro Pouch Laminator with a 5 Year Warranty is one of the top pouch laminators available. The Model 8020, the upgrade to the Model 7000 and Model 7200, includes an adjustable temperature dial and external thermostat for perfect laminating results every time. These additional features not included on the Model 7000 are normally an additional $60.00. Save by ordering the Model 8020 online today! Not only does the Model 8020 include a 5 year warranty but after the 5 years expire your laminator will be fixed for a fee of $15.00 plus shipping. Laminates up to 10mil with an adjustable temperature control. Our #1 Selling Heavy Duty Pouch Laminator Laminates up to 12-9/16" in width Laminates up to 10mil pouch thickness Laminates up to 33" per minute Illuminated ready signal Adjustable Temperature Dial Independent Heat Run Switch Quick warm up time Heavy Duty Motor and Gears Made in the USA 5 Year Warranty
Specifications: Print speed: 538 ft²/hr Billboard (2 pass); 248 ft²/hr Outdoor High Speed (4 pass), 183 ft² - Outdoor Plus (6 pass); 140 ft²/hr Indoor Quality (8 pass), 108 ft²/hr Indoor High Quality (10 pass), 65 ft²/hr Blacklits, Textiles, and Canvas (16 pass), 54 ft²/hr High Saturation Textiles (20 pass) Print quality color (best): up to 1200 x 1200 dpi Print technology: HP Latex Printing Technologies Ink types: HP Latex Inks Number of print cartridges: 7 (black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimizer) Print heads: 6 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 1 HP Latex Optimizer) Media types: Banners, self-adhesive vinyls, films, papers, wallcoverings, canvas, synthetics, (fabrics, mesh, textiles and any other porous materials require a liner) Media width: up to 64 roll width Media thickness: up to 19.7 mil Minimum dimensions: 101W x 33D x 54H Package dimensions: 110.1W x 30D x 49.3H Weight: 459 lbs. Operating temperature range: 59 to 86ºF Operating humidity range: 20 to 80% RH (non-condensing) Whats included: HP Latex 335 Printer, printheads, maintenance cartridge, printer stand, spindle, take-up reel, variable front tension kit, user maintenance kit, edge holders, quick reference guide, setup poster, documentation software, FlexiPrint HP Edition RIP, power cords Warranty: One-year limited hardware warranty
What's In The Box: SureColor P-Series Printer Printer Stand with Catch Basket Spindle-free Roll Media Adaptors Set of eleven 110 ml initial ink cartridges Ink Maintenance Tank(s) (installed) AC Power Cable User Guide Kit (Documentation and Warranty) Software is provided via download Sample roll - Epson Doubleweight Matte Paper for print head alignments General: Operating Systems: Apple macOS® 10.13.x-10.12.x, OS X®: 10.11x-10.7x Microsoft® Windows®: 10, 8.1, 7 (32-bit, 64-bit) Temperature:Operating: 50 ° to 95 °F (10 ° to 35 °C) Operating (recommended): 65 ° to 75 °F (18 ° to 24 °C) Storage: -4 ¢ª to 104 ¢ªF (-20 ¢ª to 40 ¢ªC) Humidity:Operating: 20 - 80% (no condensation) Operating (recommended): 45 - 60% (no condensation) Storage: 5 - 85% (no condensation) Sound Level:Less than 47 dB(A) according to ISO 7779 Dimensions:Basket closed: 53.4" x 26.3" x 48" (1356 x 667 x 1218 mm) Weight:223 lb (101 kg) Warranty:Standard one-year usually next-business day on-site repair with toll-free phone support Monday through Friday
