Printing Method
Printing Technology FINE: Full-Photolithography Inkjet Nozzle Engineering
Maximum Resolution 2400 x 1200 dpi
Ink Type Pigment-based
Ink Cartridge Configuration 8 individual cartridges
Number of Nozzles 1,536 nozzles x 12 channels
Total: 18,432
Minimum Ink Droplet Size 4 pL
Media Handling
Paper Handling Front-loading roll feed (one roll, front output)
Front-loading manual feed (front output)
Multifunction roll system (second roll, bi-directional take-up system)
Media Width 8-44" / 20.3-111.8 cm
Borderless Printing Width 10" / 25.4 cm, 14" / 35.6 cm, 17" / 43.2 cm, 24" / 61 cm, 36" / 91.4 cm, 42" / 106.7 cm, 44" / 111.8 cm, B2 20.3" / 51.5 cm, A1 23.4" / 59.4 cm, A0 33.1" / 84.1 cm, B0 40.6" / 103 cm
Minimum Length 8" / 20.3 cm
Maximum Length Roll Paper: 59' / 18 m
Cut Sheet: 63" / 160 cm
Media Thickness 2.8-31.5 mil / 0.07-0.8 mm
Margins Roll Paper
Top: 0.12" / 3 mm
Bottom: 0.12" / 3 mm
Side: 0.12" / 3 mm
Borderless
Top: 0" / 0 mm
Bottom: 0" / 0 mm
Side: 0" / 0 mm
Cut Sheet
Top: 0.12" / 3 mm
Bottom: 0.79" / 20 mm
Side: 0.12" / 3 mm
Maximum Roll Diameter 6.7" / 17 cm
Core Sizes 2 or 3" / 5.1 or 7.6 cm
Connectivity
Interfaces USB 2.0
Ethernet (10/100/1000Base-T/TX)
Wi-Fi (IEEE 802.11b/g/n)
Direct Printing USB
Wi-Fi
OS Compatibility Windows 70, 8.1, 8, 7, Vista (32/64-bit)
Mac OS X 10.7.5-10.11.x
Memory 3 GB
Hard Disk Capacity 320 GB
Print Languages Swift Graphic Raster (SGRaster)
Physical
Control Panel 3.5" / 8.9 cm color touchscreen LCD
Power Requirements 100-240 VAC
Power Consumption Maximum: 107 W
Standby: 1.8 W
Off: 0.5 W
Certifications ENERGY STAR
RoHS Directive
Acoustic Noise 49 dB(A)
Operating Conditions Temperature: 59 to 86�°F / 15 to 30�°C
Humidity: 10 to 80%
Dimensions 46 x 62.7 x 38.7" / 116.8 x 159.3 x 98.3 cm with basket open
Weight 267 lb / 121 kg
This printhead GEN5 (MH5420/5440) is suitable for Mimaki JFX500-2131 & UJV500-160 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022626 replacing M013497, M016979 and M015068).
The following items are expressly excluded from warranty coverage:
defects in printers related, in any way, to the use of any non-original or DIGINK inks or ink cartridges and nozzle clogging
defects related to misuse, abuse, accident, neglect, lack of use, or improper storage when not in use for extended periods
defects related to failure to perform periodic maintenance as specified in the user documentation; operation for unintended purposes
defects related to improper loading of media
all other defects, failures or damage not considered manufacturing defects
defects related to third-party applications, software, parts, components, or peripheral devices, including any bulk ink system.
defects that are merely cosmetic in nature.
Product Specifications
Dimensions: 89 x 25 x 69 mm (excluding cables)
Head materials: SST, Nickel alloy and Epoxy Adhesive
Nozzle plate surface: Coated SST
Number of nozzles: 4 x 320 nozzles
Nozzle spacing: 0.1693 mm
Nozzle density: up to 600 npi
Piezo yype: D33 Stacked PZT
Temperature control: Integrated Heater and Thermistor
Operator temperature range: Up to 80�° C
Native drop volume: 7 pl
Drop volume range: 7 - 35 pl
Drop velocity: 7 m/s
Jetting frequency: Up to 60 kHZ
Life: 100 billion actuations per nozzle
This printhead carries a manufacturer warranty.
Country of origin : Japan
Compatible firmware:
UJV55-320 FW Ver. 2.5 or later
SIJ-320UV FX Ver. 1.90 or later
SWJ-320EA FW Ver. 1.30 or later
UJV500-160 FW Ver. 2.00 or later
JFX500-2131 FW Ver. 3.40 or later
More Information Please Visit our website official store GAOLITOPRINTER,
many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys
, Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This main board IPB100 is suitable for Seiko ColorPainter 100S printers.
This is the original Seiko part (number U00097340501 replacing number U000973405**).
SKU: U00097340501
Manufacturer part number: U00097340501
Trimble 5800 GPS Base or Rover 450-470 MHz Receiver
Trimble 5800 GPS Rover Receiver 450-470 MHz w/ Options...
- CMR Inputs
- CMR Outputs
- RTCM Inputs
- RTCM Outputs
- Data Collector
- Binary Outputs
- Data logging
- Bluetooth
- UHF Transmit
- Software Version 2.32
- Boot Version 2.30
- 450 - 470 MHz Radio Module P/N: 59400-66
- Factory Serviced
SKU: GPS47
Item ID: X3190-L/T*
Condition: Refurbished
Warranty: 90 Day Exchange
Trimble 5800 GPS Receiver The Trimble 5800 GPS receiver provides reliability and simplicity for basic surveying tasks. You can trust that the proven design of the Trimble 5800 will perform under the toughest conditions. Integrated System Because the Trimble 5800 GPS receiver's components are completely integrated, the system is lightweight and ergonomic and completely cable-free. 2 MB of internal memory makes collecting data for postprocessing extremely easy and efficient, whether for static or kinematic (stop-and-go) surveying. Advanced Technology The Trimble 5800 GPS system offers advanced Trimble GPS technology. It is a 24-channel dual-frequency GPS receiver, containing Trimble's proven Maxwell technology for robust tracking in difficult GPS environments. Two additional channels for WAAS and EGNOS tracking let you perform real-time differential surveys to GIS grade without a base station. The dual-frequency Trimble antenna enhances the tracking capabilities of the Trimble 5800 the patented four-point antenna feed provides submillimeter phase center stability for precise results. The position of the UHF radio antenna mounting further increases accuracy by being out of the GPS line-of-sight, reducing multipath and avoiding interference with the GPS antenna. For rover communications use the built-in 450 or 900 MHz radio, or use an external radio, cell phone or wireless packet data modem. For extended coverage and comprehensive error checking when roving, the Trimble 5800 works with signals from multiple base stations transmitting on the same radio channel. For even larger area coverage, at highest accuracies, the Trimble 5800 works with Trimble VRS networks. Integrated Bluetooth wireless technology enables cable-free communication between the receiver and your Trimble controller. Built For The Field As a rover, the Trimble 5800 is not only lightweight and cable-free; it also consumes minimal power. Two miniature batteries will power the receiver for up to 11 hours at least enough for a full working day. Environmentally rated to IPX7, and submersible to a depth of 1 m, the Trimble 5800 is rugged enough for any job. It can withstand a drop of up to 2 m on to a hard surface. Trimble 5800
Total station, video scope, flaw detector, xrf/libs analyzer, thermal imager, ndt equipment, 3d scanning, surveying equipment, laboratory equipment and other tester/analyzer.Export
The HiPer HR GNSS receiver overcomes field challenges with a unique blend of technologies. If you are under tree cover, or can't get the pole plumb, or need to range widely from your base, or you need superb accuracy, or work in wet conditions, or all of the above, youâ??ll be free to do your best work.
Features include
Next generation Fence Antenna for superior reception
Rugged, waterproof IP67 environmental design
Cellular, LongLink and Radio communications all integrated
452 Universal Tracking channels
Unique 9-axis TILT compensation
Internal Wi-Fi and multi-spectrum Bluetooth
HiPer HR Specifications
GNSS Tracking
Number of Channels: 452 with patented Universal Tracking Channel Technology
GPS, GLONASS, Galiileo, BeiDou, QZSS, SBAS, L-Band
Satellites Tracked: All in view
Update/Output rate: Up to 20 Hz
Communications
Radio: UHF(410-470MHz), SS (915 MHz)
LongLink: Yes
I/O Communications: Internal Cell modem, Wi-Fi, Bluetooth
Memory/Data Storage: Up to 8 GB
Power and Electrical
Power: External power, 6to28VDC, 2 x Internal batteries, 3.7 V, 2900 mAh each
Operation Time: Up to 9 hours with removable batteries
Physical and Environmental
Operating Temperature: -40�°C to 80�°C
Waterproof: IP67
Drop Test: 2 meter pole-drop
Weight: 1kg
Accuracy
Static/Fast Static:: H: 3 mm 0.4 ppm, V: 5 mm 0.5 ppm
Precision Static: H: 3 mm 0.1 ppm, V: 3.5 mm 0.4 ppm
RTK (L1 L2): H: 5 mm 0.5 ppm, V: 10 mm 0.8 ppm
RTK, TILT Compensated:H: 1.3 mm/
GSSI SIR 4000 control unit
1600 MHz or 2600 MHz antenna
Model 615 handcart with encoder
7 meter control cable
Rugged carrying case
2x batteries and charger
2 year GSSI warranty
GSSI SIR 4000 control unit package includes
SIR 4000 Control Unit
1600 MHz or 2600 MHz antenna
Model 615 handcart with encoder
7 meter control cable
2x Lithium-ion battery, Dual-bay battery charger
Rugged transit case
2 year warranty
RADAN 7 Software
Accessories: Palm Antenna, SIR 4000 stand, SIR 4000 carry harness
2 year GSSI warranty
GSSI StructureScan Pro SIR-4000 is typically used to Scan for rebar, post-tension, conduits, and non-metallic objects, Concrete slab scanning, Locate voids, Concrete imaging, Condition assessment, Structural inspection
Superior Thermal Imaging
Sharp thermal resolution at 76,800 pixels for solid accuracy from farther away
MSX Enhancement
Multi-Spectral Dynamic Imaging adds visible spectrum definition to IR images in real time for excellent thermal detail to help you instantly recognize the problem locations
Field of View (FOV) Match
Now you have the option to automatically match the visible camera field of view to the IR FOV for better documentation
Compass
Adds camera pointing direction to every image for additional location documentation
Wi-Fi Connectivity
Send images and data to smart phones and tablets (ie. iPhone�®, iPad, iPod touch , or Android) to share images and critical information quickly using FLIR Tools Mobile app
Accurate Temperature Measurement
Accuracy calibrated within / C or / 2% of reading
High Temperature Range
measuring up to 2192 F (1200 C) targeting electrical and industrial applications (T440 model)
Scalable P-i-P and Fused Thermal Images
Blend thermal with visible light images on-screen; includes picture-in-picture window sizing
Multiple Measurements
Add up to 5 box areas and 5 moveable spots using the touchscreen to gather more detailed information
METERLiNK
Wirelessly transmit vital diagnostic data from clamp and moisture meters directly to the camera for annotating thermal images to further support findings
Annotation
Add voice comments via Bluetooth headset and text notes from the touchscreen keypad; New! T440 has image sketch feature to draw circles and pointers on IR/Visual stored images
InstantReport
Create PDF document directly from the camera
Excellent ergonomics: The FLIR T460 has a tiltable infrared unit and auto-orientation, which make it easy to capture images from any angle comfortably. The small size and low weight of the camera facilitate its use over a full working day.
Affordable performance: The FLIR T460 is equipped with the innovative Multi Spectral Dynamic Imaging (MSX) feature, which produces an image richer in detail than ever before. You can highlight objects of interest, on both the infrared and visual images, by sketching or adding predefined stamps directly onto the cameraâ??s touch screen.
Extensive communication options: The Wi-Fi connectivity of the FLIR T460 allows you to connect to smart phones or tablets for the wireless transfer of images or the remote control of the camera. The Bluetooth-based METERLiNK function transfers readings from external measurement instruments to the infrared image.
Support for UltraMax: When enabling UltraMax in the camera, the resolution of images can be substantially enhanced when importing the images into FLIR Tools.
21 Electric Testers Suppliers
Short on time? Let Electric Testers sellers contact you.
