Marine Gas Oil (MGO) Very Low Sulphur Fuel Oil (VLSFO) Heavy Fuel Oil (HFO) IFO 380 and IFO 180 (RMG) If you are looking for bunker supply we can supply at reasonable rates. COD basis for first few transactions followed by credit terms once relationship is built. Prices will be in relation to platts.
Temperature range: -25C° and +25°C Fresh air exchange: adjustable from 0-285 m³/hr Dehumidification Range: 65% - 85% (in chilled mode) Bottom-air delivery Dual temperature settings for chiller/ambient or freezer unit Electronic control panel Flashing strobe beacon in operation when unit powered Data logger Hygienic, easy-to-clean stainless steel interior with shelving Digital electronic controller See-through lockable control panel Double wing door with heavy duty hinges DNV 2.7-1 wire rope sling assemblies 230/110V single phase or 380-480V, 2 phase + E, 50/60Hz supplies Satellite real-time tracking GPS device (ATEX, IECEx, Zone 0)10reefer DNV 2.7-1 / EN12079 temp -18c to +22 degree Including offshore certificate and CSC certificate; Including LR inspection charge on site; Including refrigeration machinery, DAIKIN type marine RU
40' Onshore freezeReefer Containerr container,Carrier RU
BMC is restless in their pursuit of perfection. Because of this, they re-engineered their popular Speedfox platform, and the standard-bearer, the Speedfox 01. This is a trail bike that has improved its climbing, its descending, its overall performance. It still features both 27.5 and 29er wheel choices, because they both believe big rolls better and believe people should choose the size that best reflects their riding needs. The change people talk about first is a new technology called Trailsync. Its a cable-actuated handlebar-mounted lever system that simultaneously drops the seatpost and opens up the rear suspension. Ride with your saddle high and suspension firm for the climbs and flats, drop it a bit for rough stuff, drop it all the way when letting it all hang out at high speed. The drop is 80mm for the Small, 100mm for the Medium, and both the Large and XL have 120mm. Theres a stop 35mm down before dropping the whole way. BMC routes the cable internally to both the shock and the post. The post itself is an alloy mast with a post-topper similar to what you find on seat-masted road bikes. You cut the mast to get close to the right size, and then fine-tune with the topper clamp.
EN590, - CIS Origin Other products: Clean and Dirty Oils: ESPO, BLCO, LCO, JetA1, JP54, D2, D6, EN590, AGO, FUEL OIL, Delivery: FOB, CIF Payment: SBLC, DLC, MT 760, MT 700, MT103/TT
Essenza has a full range of industrial oils, which provide optimum performance and superior protection of your machinery and equipment which are prone to operating under extreme conditions. To find a cost-effective solution to your industrial lubrication requirement, Our products are made available from ISO 9001 plants in Singapore and Europe.
We provides fully Synthetic, 100% Synthetic, Semi Synthetic and mineral plus oil. We have products that suits Racing and sports, for 4-stroke and 2-stroke engine powered saddle. 5W-40, 10W-60, 15W-50, 1OW-30, 10W-40 so on and so forth API SL level, JASO MA, MA2 Products are available in 1L/4L bottles, 1L/4L metal tins, 20L pail, 200L drums
This silicon carbide crucibles are used to produce sponge iron based on tunnel kilns. Main sponge iron market is India, Iran and Mexico.
With models designed around both 27.5 and 29-inch wheels depending on frame size, the Fluid FS 3 features 130mm of SR-Suntour XCR-34 AIR fork travel paired to 120mm of X-Fusion 02 Pro R rear suspension. For more information please visit our site, we will explain in more detail to you.
Material: Fine Ash, Color of Fly Ash: Light Gray color Material: BSEN450 / ASTM Standard, Grade & Specification: POZZOPOINT a. 12 % Retention on 325 mesh BS EN 450 b. 18% Retention on 325 mesh ASTM Standard c. 25% Retention on 325 meshASTM Standard d. All customer required specification. Packing: 1.4 Mt Jumbo bags, Delivery: Within 10 days from the date of receipt of order, Payment: 100% LC at sight, For your ready reference, we attached the photos of the material for your reference. Awaiting for your valuable order.
Material: Fine Ash, Color of Fly Ash: Light Gray color Material: BSEN450 / ASTM Standard, Grade & Specification: POZZOPOINT a. 12 % Retention on 325 mesh â?? BS EN 450 b. 18% Retention on 325 mesh â?? ASTM Standard c. 25% Retention on 325 mesh â?? ASTM Standard d. All customer required specification. Packing: 1.4 Mt Jumbo bags, Delivery: Within 10 days from the date of receipt of order, Payment: 100% LC at sight, For your ready reference, we attached the photos of the material for your reference. Awaiting for your valuable order.
High Quality Clay Desiccant with Mil Standard.
High Quality Bubble mailer, Kraft, PE or Metallic materials. Custom made sizes are available.
Product Description: 1. Commodity: Unused rails way 2. Total quantity: 3,000,000 MT (Three Million Metric Tons)/ we can supply any requested quantity 3. Delivery per month: Start from 250,000 MT up to 500,000 MT monthly 4. Origin: Saudi Arabia 5. Product: Railway R50/ R65 6. Size: See attached the Technical specification â?? HMS-2, RAILS R50, R65â?? 7. Price: 300US DOLLARS PER MT (THREE HUNDRED DOLLARS). Including commission 20USD from Buyer through IMFPA. 8. Destination port: Any safe port destination, C&F/ASWP 9. Packing: Break Bulk 10. Inspection: In loading port by SGS or other reputed agency by Sellers expense. In discharging port by SGS or other reputed agency by Buyers expense. SECOND QUALITY (UNUSED) - RAIL WAY RAIL STEEL NO. 1. STANDARD SECTION TEE RAILS, ORIGINAL WEIGHT 50 POUNDS PER YARD, OVER HEAVIER, 120.50 M RAILS. STEEL NO. 2. CROPPED RAIL ENDS, STANDARD SECTION, ORIGINAL WEIGHT 50 POUND PER YARD AND OVER 12.50 METERS LONG.
Product Description: 1. Commodity: Unused rails way 2. Total quantity: 3,000,000 MT (Three Million Metric Tons)/ we can supply any requested quantity 3. Delivery per month: Start from 250,000 MT up to 500,000 MT monthly 4. Origin: Saudi Arabia 5. Product: Railway R50/ R65 6. Size: See attached the Technical specification â?? HMS-2, RAILS R50, R65â?? 7. Price: 300US DOLLARS PER MT (THREE HUNDRED DOLLARS). I 8. Destination port: Any safe port destination, C&F/ASWP 9. Packing: Break Bulk 10. Inspection: In loading port by SGS or other reputed agency by Sellers expense. In discharging port by SGS or other reputed agency by Buyers expense. PER YARD, OVER HEAVIER, 120.50 M RAILS. STEEL NO. 2. CROPPED RAIL ENDS, STANDARD SECTION, ORIGINAL WEIGHT 50 POUND PER YARD AND OVER 12.50 METERS LONG. (28B) (28C) RAIL â?? STEEL NO.2 T â?? RAIL ENDS STANDARD SECTION â?? ORIGINAL WEIGHT 50 POUNDS PER YARD AND OVER 12.50 POUNDS PER YARD AND OVER 12.50 METERS â?? RAIL, STEEL NO.3, STANDARD SECTION FEE, GENDER, AND/OR GUARD RAILS, FREE FROM FROG AND SWITCH RAILS NOT CUT APART, AND CONTAIN NO MANGANESE, CAST, WELDS OR ATTACHMENT ANY KIND EXCPET ANGLE BARS ALSO RAILS, NOT FOUND AND WITHOUT RADIATION AND EXPLOSIVE SUBSTANCE 1.0M (1.0â?? 1.5M) RAIL FERROUS
We have LCO with Payment via Transferable LC by Top Prime Bank. Please let me know if you are interested, we will send the Corporate Offer.
We have ESPO with Payment via Transferable LC by Top Prime Bank. Please let me know if you are interested, we will send the Corporate Offer.
The 2020 Orbea Occam M10 trail bike is based around an OMR carbon frame, a 140 mm Fox Float DPX2 Factory rear shock with Kashima coat, and a Fox 34 Float Factory fork with 140 mm travel, Kashima coat, and a FIT4 damper.
E3 3/32 TIG WELDING TUNGSTEN ELECTRODES REPLACES 2% TUNGSTEN E3 1/8 TIG WELDING TUNGSTEN ELECTRODES REPLACES 2% TUNGSTEN E3 1/16 TIG WELDING TUNGSTEN ELECTRODES REPLACES WT20 E3 Tungsten Electrodes deliver superior arc starting, electrode lifetime, and overall cost effectiveness. Users of 2% thoriated tungsten can switch to E3 tungsten with confidence. E3 requires fewer re-grinds and provides longer overall lifetime when compared to 2% thoriated. E3 tungsten can be used on DC electrode positive or negative with a pointed end, or balled for use with AC power sources. Featues over Thoriated Tungsten Lower operating temperature Fewer re-grinds Improved arc starting Versatile use Size: 1.2mmx175mm 2.0mmx175mm 2.4mmx175mm 3.0mmx175mm 3.2mmx175mm 4.0mmx175mm 5.0mmx175mm 1.2mmx150mm 2.0mmx150mm 2.4mmx150mm 3.0mmx150mm 3.2mmx150mm 4.0mmx150mm 5.0mmx150mm Black rod * 2.0mmx450mm * 2.4mmx450mm * 3.0mmx450mm * 3.2mmx450mm * 4.0mmx450mm * 5.0mmx450mm * 6.0mmx450mm * 8.0mmx450mm Polished * 800-1000mm in length
The Enduro Elite combines peerless downhill performance with surprisingly quick acceleration. The Elite delivers blistering speed, mega-travel length and components that're big on performance.
