- Temperature Scanners Suppliers and Manufacturers

PA66 FR regrind black color Pa6 / pa66 is mainly applied as follows: 1. Improves nylon water absorption and improves size stability of the product. 2. Improved nylon fire resistance to meet the requirements of electronics, electrical, communications and other industries. 3. Improved mechanical strength of nylon to achieve the strength of metal materials, metal replacement. 4. Improves nylon low-temperature resistance and enhanced resistance to environmental stress. 5. Improves nylon wear resistance to meet high wear resistance requirements. 6. Improves nylon antistatic properties to meet its extraction requirements and mechanical applications. 7. Improves nylon heat resistance to adapt to high temperature conditions such as car engines. 8. Reduce nylon cost and improve product competitiveness. Through the above modification, high performance and functionalization of nylon composite materials are realized, thereby promoting the development of industries involving high performance and high quality. MATERIAL : PA66 FR regrind black color CATEGORY : PA66 FG TYPE : Regrind GRADE : Black color SPECIFICATION : GF50. 1 full container available Origin : Tunisia LOADING WEIGHT 23 Ton FOB (USD/Ton) : 750$ - 950$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days

Lians is a reliable supplier in plastic watse recycling business. We can supply HDPE product as below: HDPE Blue Crate Regrind For Recycling MATERIAL: HDPE Blue Crate Regrind CATEGORY: HDPE TYPE: Regrind GRADE: Injection SPECIFICATION: *Speciment conditioning: None *Test Temperature: 190�?�°C *Test Mass (Km): 2.16 *Nature (form) of Charged Material: Polymer pieces *Smooth Surface *Melt flow rate (gram/10minutes): 4.47 Origin: Aus LOADING WEIGHT: 22 Tons FOB (USD/Ton): 650-700

rLDPE repro Yellow pellets from post-consumer & post-industrial films. The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin. r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion Packing: 1000kg bulk bag Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5 Density 0.92 �± 0.015 Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility. rLDPE Yellow is typically extruded at a melt temperature around 190�?C (min 180�?C, max 240�?C). Mesh filters: 150 on the laser filter and 120 on the piston filters.

PPE material (called Polyphenylene Ether). PPE resin, exhibits low moisture absorption due to its inherent composition. Therefore, good electrical insulation properties will be achieved under temperature and humidity conditions. Chemical reaction from water, most salts, acids and bases is also minimal with PPE material. MATERIAL: PPE regrind black CATEGORY: PPE TYPE: regrind GRADE: black SPECIFICATION: Grade V-0, engineering plastic Origin: Japan LOADING WEIGHT: 25 Ton FOB (USD/Ton): 900$ - 1000$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days PPE Plastic Provides: Good electrical insulation properties Long term dimensional stability Outstanding impact resistance Light-weight Heat resistance Good hydrolysis stability

POM Regrind from zipper Teeth, industry lump, industry runner Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts. One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc. MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner CATEGORY: POM TYPE: Regrind SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt Origin: Bangladesh LOADING WEIGHT: 24 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days

ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc ABS has excellent mechanical properties, excellent impact resistance and can be used at extremely low temperatures. ABS has excellent wear resistance, good dimensional stability and oil resistance, and can be used for bearings under medium loads and speeds. ABS's creep resistance is greater than PSF and PC, but smaller than PA and POM. The flexural and compressive strength of ABS are poor in plastics. The mechanical properties of ABS are greatly influenced by temperature. ABS is flammable material and belongs to HB class according to UL94 standard. ABS burns quickly when ignited, and emits a lot of toxic gases and black smoke, which is not conducive to practical application. With the advancement of science and technology and improving the quality of life, everyone's safety awareness is getting stronger. The domestic and foreign countries have put in place strict fire and flame retardant requirements for plastic materials used in automobiles, construction, home appliances, office supplies, etc., and made corresponding technology. Standards and specifications, so research on ABS flame retardants has a very important meaning. MATERIAL: ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc CATEGORY: ABS TYPE: Regrind SPECIFICATION: Regrind Abs from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc. Qty per month 1 container 26 mt Origin: Bangladesh LOADING WEIGHT: 26 Ton FOB (USD/Ton): 750$ - 950$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days

Origin: United Kingdom Material: LDPE Repro pellets Yellow Category: LDPE Type: Repro pellets Color: Yellow Quantity: 500 Tons Loading weight: 24 Tons Specification: "rLDPE repro Yellow pellets from post-consumer & post-industrial films. The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin. toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion Packing: 1000kg bulk bag Melt flow rate (190�?C / 2.16kg) 0.5 � 0.5 Density 0.92 � 0.015 Measured on blown film of 25 �m and BUR of 2.5 at external testing facility. rLDPE Yellow is typically extruded at a melt temperature around 190�?C (min 180�?C, max 240�?C). Mesh filters: 150 on the laser filter and 120 on the piston filters."

POM regrind black color full container available POM plastic possesses the same priority features as other plastic polymers, some of the highlights of the special resin: High hardness Bearing good Low friction number High resistance to abrasion High temperature resistant Less water intake Has anti-static ability Dimensional stability, little change Less smoke burns when burning High glossy surface High crystallization In addition to the priority points, POM plastic also has some limited formats such as: Quality acid resistance and alkali High hatch rate when changing secretions Operation mode Heat range MATERIAL: POM regrind black color full container available CATEGORY: POM TYPE: Regrind GRADE: Black color SPECIFICATION: 1 full container available Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days

Firefighters Boots (with the test report) Recommended for structural fire fighting, general fire rescue & bush fire fighting. Made of Vulcanized Rubber (upper part and sole) and woven cotton canvas for extra comfort. Features: Sole/Heel: - Flame-retardant rubber outsole - Fuel oil resistant - Slip-resistant - Excellent abrasion resistance - Catered to enter high temperature - Cold insulation - Steel midsole Upper construction: - Flame-retardant upper part with heat insulation - Waterproof - High visibility with black and yellow contrast

Kubba Tactical Knee Pads Function: The knee joint is fixed, which improves the stability and strength of the knee, reduces the burden of the knee ligament when raising the leg and jumping, and enhances the protection of the knee ligament, with good air permeability and comfortable wearing feeling. Specification for elbow pads: Plastic protective block: PVC, Fabric: 600D Oxford cloth, Buffer layer: 15mm thick EVA foam sheet Lining: Mesh Army green color, with embroidered  Kubba  logo 6.Impact resistance: withstand the impact of 120 kinetic energy Structure: The plastic protective block is to resist hits and collisions and disperse the impact force. The middle foam absorbs impact energy Suitable environment temperature: -20~+55 Weight: 0.18kg/ pair Specification for knee pads: Plastic protective block: PVC, Fabric: 600D Oxford cloth, Buffer layer: 15mm thick EVA foam sheet, Lining: Mesh Army green color, with embroidered  Kubba  logo Impact resistance: withstand the impact of 120 kinetic energy Structure: The plastic protective block is to resist hits and collisions and disperse the impact force. The middle foam absorbs impact energy Suitable environment temperature: -20~+55 Weight: 0.25kg/pair

Fire Fighter Helmet Specifications: 1. Kubba Tactical High-Strength helmet: This helmet is made of high-strength nylon material. It is very light and comfortable. It is also made � with six layers of fire insulation and heat radiation resistance. Because of this, the helmet can effectively protect the top of the head from external impact and high temperature. The full brim design can Prevent rain and sunlight from entering your eyes, making your work safer. 2. Adjustable helmet: This Kubba Tactical helmet can adjust the head circumference adjustment range to 53-63cm. This � can easily adjust the size of the helmet to suit different head shapes. The ventilation holes on the top can dissipate heat and ventilate, which is convenient and practical, and is suitable for most people to wear. 3. Reflective stripe design: It can provide the best vision when the vision is poor. The main body of the helmet with yellow + red reflective stripes can be clearly identified among members of the rescue team. Make it safer to use at night. 4. Multi-site application: The helmet is specially designed for outdoor operations, forest firefighting, traffic accident rescue, search and rescue, steep surface/mountain rescue, chemical leakage accident rescue, safety earthquake emergency kit. Suitable for private or professional use.

Firefighter Reflective / Protective Clothing (Bracket Support) Firefighter protective Clothing: 2019 models: Clothing outer fabric: The use of 210g arylon three anti-fabric, which not only has a permanent flame retardant, high temperature resistance, acid and alkali resistance and other properties, and its strong performance is very excellent, with high heat insulation, permanent flame retardant, high strength, anti-cutting, acid and alkali resistance, arc resistance and other characteristics, improve the overall protection performance of clothing, clothing overall main technical parameters are much higher than the industry standard and bidding technical requirements. The fire retardant performance of the firefighter\'s fire extinguishing suit: the warp and weft continuous burning time is 0s, the warp and weft damage length is less than 51mm; Breaking strength: longitude and latitude 1000N; Tear strength: longitude and latitude 120N; Moisture resistance 3, thermal stability: change rate 1.0%; Color fastness: Color resistance 4, water friction resistance 4. Waterproof breathable heat insulation layer: aramid non-woven fabric and flame retardant PTFE film, gram weight 180g/m2. It can not only prevent the infiltration of water and other general liquid chemicals, but also discharge a large amount of hot gas generated in the body during fire rescue in time. The fabric has hydrostatic pressure & 50kPa, moisture permeability 5439g/m2/24h, oil-repellent performance 3, and thermal shrinkage 1%. Comfort layer: The use of intermediate arylon fiber and flame retardant viscose fiber blended, gram weight 125g/m2, flame retardant performance, thermal stability and other properties are very good. Size: S/M/L/XL