1.Description of addition cure liquid silicone rubber G-830 silicone rubber platinum cure silicone rubber. The silicone rubber will be cured under room temperature and can be cured fastly by heating, Itâ??s two-components liquid silicone rubber , the mixing ratio is 1:1 . It has an exceptional fluidity and good operability.Especially ,the platinum cure silicone rubber has a lower shrinkage,higher temperature resistance and it is flexible. 2.Characteristics of addition cure liquid silicone rubber (1).An exceptional fluidity and good operability (2).Good tensile strength and tear strength (3).Food grade silicone rubber (4).high temperature resistance (5).good flexibility (6).No smell ,non-toxic (7).long shelf-time &lifetime (8).Lower shrinkage 3.Application of addition cure liquid silicone rubber G-830 silicone rubber is flexbile silicone rubber ,it has a higher temprature resistance and lower shrinkage, so it is suitable to make the silicone gasket for machine sealing . Packaging & Shipping Packing: 20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B 25KG/drum vacuum packing for part A + 25KG/drum vacuum packing for part B 200KG/drum packing for part A +200KG/drum packing for part B
Construction: Inner Tube:Polyester elastomer(cream color). Reinforcement:One polyester braid. Cover:Proprietary urethane blend("Tuff-Skin"). Cover color:Black,non-perforated(other colors available). Temperature range: -40F-135F(-40C-57C)Limited to 150F(+66C)for water-based or fire resistant fluids.(Delta) working length at rated WPSI:±2% max. Features: Bonded construction,slim profile and light weight,flexible and kink resistant,black color denotes 4000 psi,low coefficient of friction,excellent cut,gouge and abrasion resistance 4000psi working pressure. Applications: High pressure water cleaning ,lateral sewer lines,water jetting equipment,not for hydraulic applications.
Construction: Tube:Oil resistant synthetic rubber. Reinforcement:Four tensile steel wire spiral layers. (DN10/12/16/19/25) Six tensile steel wire spiral layers. (DN32/38/51) Cover:Black, abrasion and weather resistant synthetic rubber. Temperature range: -40° C to +121° C Application: Heavy duty impulsive high pressure hydraulic applications like excavators, dosers, dumpers, cranes, compactors, rock breakers and hydraulic drill rigs and other construction equipments. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Construction: Inner Tube:Oil resistant synthetic rubber. Reinforcement:Two high tensile steel wire braid. Cover:Abrasion and weather resistant synthetic rubber. Temperature:-40C~+125C. Application: Mining, metallurgy, petroleum, construction machinery and chemical industry.
Construction: Inner Tube:NBR, Black, Smooth. Reinforcement:Fine wire reinforced, Electrically conductive. Cover:Synthetic Rubber. Temperature:-20 C to +45 C. Feature:Conveying medium: Industrial water, waste water, seawater and irrigation inagriculture. Character: The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
Construction: Inner Tube:Oil resistant synthetic rubber. Reinforcement:Two high tensile steel wire braid. Cover:Â Abrasion and weather resistant synthetic rubber. Temperature range:-40 C to 120 C. Application: Double wire braid: Recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Long-lasting cover is suitable for many mobile hydraulic applications. Meets or exceeds all SAE 100R2 AT hydraulic hose specifications.
Construction: Inner Tube:Oil resistant synthetic rubber. Reinforcement:One high tensile steel wire braid. Cover: Abrasion and weather resistant synthetic rubber. Temperature range:-40 C to 120 C.
We would like to sell Unvulcanised Rubberised Nylon Friction from Bangladesh. Our goods are wastage from Tyre Plants as Unvolcanised scrap.
Yijiasan rtv liquid silicone rubber can be used for the molds making of plaster, concrete, pu, gypsum , artificial stone , grc , resin, plastic toys, lost wax, soap, candle, architectual decoration etc. Rtv-2 silicone rubber component a is white flowing liquid and component b is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. Characteristics of silicone liquide for mould making 1.) amazing fluidity and easy to operate 2.) delicate design available 3.) non oily 4.) non-toxic and odorless catalyst provided 5.) easy de-molding 6.) excellent tension and tear strength 7.) high performance in duplication 8.) almost nil shrinkage below0.1 9.) excellent resistance to weather, temperature, aging, acid & aging-proofing.
Silicone rubber are general called two-component room temperature vulcanization liquid silicone rubber with excellent fluidity and good operational performance. Part a is liquid silicone, part b is curing agent applications: platnium silicone rubber is a kind of addition cure silicone rubber, which specially used for making silicone body products, such as human skin, human molds, fingers, masks, organs, cake molds etc. characters: medical grade, totally nontoxic, odorless, harmless, and eco friendly - mix ratio of 1 :1, easy operation, and also suitable for machine operation - good resistance to deformation - excellent tear strength and tensile strength - low viscosity - fast speed of curing time is available, for example, within 10 minutes
After refining the specs of such surplus materials, all compounds are produced in our hi-tech modern mixing plant with modern equipment in research-development environment. As it is known the compound is made by mixing polymer, reinforcement material, softener and various chemicals. Our materials are; SBR / NR Compound NBR rubber Compound Camel Back Compound ERC Friction Compound SBR Masterbatch Off spec EPDM Rubber Off spec SBR Rubber Off Spec PBR Rubber
Rotorless Rheometer MR-C3 The curves and characteristic parameters on vulcanization of rubber material can be obtained using Rotorless Rheometer based on the measurement of the torque exerted by the rubber material on the oscillating die. The MR-C3 Rotorless Rheometer has excellent property of reappears and stability. In a test with good mixed rubber and the time range is 12min, the T90 may be several second difference in 4 continual experiments. Technical indexes Range of temperature control: from room temperature to 200? Temperature fluctuation in die: =±0.1? Temperature display resolution: 0.1? Range of temperature increase: 32?/min Measurement range of torque: 0-300dNm Torque resolution: 0.01dNm Angle of die oscillation: ±0.5°,±1°,±3° Frequency of die oscillation: 1.67Hz(100r/min) Size: 520*570*1000mm(W*L*H) Weight: about 120KG Power: AC220~230V,50/60Hz,3A
Applications: It applications include the use in pneumatic tire components, solid tires, belts, hoses, cable, automotive mounts,bushing and general mechanical products that are exposed to continuous and intermittent dynamic operating conditions and require protection from ozonation.
Rubber Process Oil are rich aromatic by products from solvent extracting process to modify physical properties of the vulcanization and to reduce the cost of the finished product. Typical Uses / Applications As component in rubber formulations and manufacturing of products such as automobile tiers, rubber shock absorbers, footwear, industrial hoses, wire and cable coverings, flooring materials and carrier fluid or solvent in manufacture of adhesives, sealants, polishes and carbon black To improve physical properties of vulcanization to reduce the cost of finished rubber compounds Tyre, Rubber and Dhoop Industry Used as a Lubricant in Rubber Processing Used in manufacturing of White Oil Used as a component in Ink Production
Natural rubber is made as raw natural rubber sheets. Raw rubber sheets are the first step to attain any rubber product. These raw rubber sheets are available for distribution to Auto Cycle tyres and tubes, Conveyor belts, Transmission belts, Footwear, tyres. we are ready to supply. Packing details; buyer requirements, Grade : RSS 1 Material : 100% natural rubber Shipping term; FOB Payment term; L/C, T/T.
RSS1 RSS2 RSS3 RSS4 RSS5 STR5L STR5 STR10 STR20 Crepe Rubber
Properties: Gray white powder (granule). The density is 1.26-1.32. soluble in benzene, CS2, methyl alcohol, acetone. chloroform, alcohol, insoluble in gasoline, water, acid and alkali with lower concentration. Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products low poison and high efficiency. It is good back up for NOBS. Be regarded as standard accelerator. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Properties: White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in alcohol, insoluble in gasoline. Application: Used for NR, IR, SR, SBR, NBR, EPDM and their latexes. A fast curing primary or secondary effective ultra-accelerator for natural and synthetic latex form compounds. Can be used advantageously for dipped, spread, and cast goods. Similar in property that of PZ. Less resistance to scorching than PZ and shows a slight tendency to premature vulcanization. An antioxidant in adhesive systems. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Properties: White powder (granule). No taste, no poison. Density is 1.66. Soluble in lower concentration alkali, CS2, benzene, acetone and CH2Cl2, partly soluble in chloroform, insoluble in alcohol, CCl4 and ethyl acetate. Application: Used for NR, IR, BR, SBR, NBR, HR, EPDM and natural & synthetic latexes. Stronger accelerating power than TMTD. Strong resistance to scorching. In its handling, care should be operated, because of its increase activation and strong tendency to scorch at low temperatures (100?C). Often used as a secondary accelerator. In latex, better results are obtained when used in combination with other types such as thiazole accelerators. Used for rubber coated fabrics, latex products and rubber cement, etc. FDA approved in USA. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: The product should be stored in the dry and cooling place with good ventilation,avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Product description Model no: jsj95/200 The first stage l/d ratio: 32:1 The second stage l/d ratio: 9:1 Price: 136666 usd/set The first stage power:260kw The second stage power:80kw Screw diameter: 92/200 Screw speed: 500/85 Capacity: 1000-1200kg/h Packing: wood case or according to requirement Certification: sgs, ce Features: 1.Low maintenance, robustness, durable finish standards, excellent functionality 2.High-efficient force-feeder ensures high capacity feeding, low energy consumption 3. Our machine has two characteristics: high degree of automation and assembly line work. 4.The pelleting machine has good dispersion effect. 5.The machine production is very high, and the work environment is very clean. 6.The technology can be adjusted according to customer's raw material. Type Diameter(mm) L/d Screw speed(r/min) Motor power (kw) Capacity(kg/h) Jsj52/100 50.5 28-40:1 500 45 150-250 100 7-12:1 85 37 Jsj65/150 62.4 28-40:1 500 55-75 500-700 150 7-12:1 85 45-55 Jsj75/180 71 28-40:1 500 90-110 750-900 180 7-12:1 85 55-75 Jsj95/200 92 28-40:1 400-500 250-315 1000-1200 200 7-12:1 85 75-90
