HNBR rubber bladder is composed of rubber pulsation bladder,rubber balance plate and pressure plate bolt, it can reduce the drilling pump pressure fluctuations of instantaneous displacement change;
Make the pump pressure smoothly, protect equipment from damage caused by severe vibration.
the product is also used as stabilizer and vibration absorber for air pump.
Filled with nitrogen in the air or inert gas, in the absence of them,air can replace.But oxygen or combustible gas is forbidden.
Inflation pressure is 20% ~ 30% of the maximum working pressure. The advanced filling pressure is 2.0-2.5 MPa.
LC120 thermal silicone pad is a very cost-effective general economic thermal gap filling gasket, soft with its own micro-stick, easy assembly. Under low compressing force to show good thermal conductivity and electrical insulation properties. Bedding on the gap between the heat device and the heat sink or the machine shell to extrude air to reach the full contact forming a continuous thermal conduction. Using heat sink or machine shell as a cooling device can effectively increase the cooling area to achieve a good cooling purposes.
Features & Benefits:
Low cost, high efficiency, cost-effective
Replace the volatile pollution of the thermal grease
Natural sticky, easy to install, can be reused
Wide range of thickness, can fill any uneven size gap
Electrical insulation
Typical Applications:
Communication equipment
New energy vehicles / power batteries
Computer
Car equipment / charger
Switching power supply
PC server / workstation
Flat-panel TV
Optical drive / COMBO
Security equipment
Notebook computers
Video equipment
Any heating element and radiator
All products will be made according to API and related international standard as per customers' requirements.
Casing quick-operating thread protector is one kind of manual device for protecting casing outside thread. The structure is simple, solid durable, reliable performance. Adopting for our casing quick-operating thread protectors could save time and cost.
Material:nature rubber+EPDM
Color:any color is available
Thickness:8-15mm
Width:1.22m
Length:15-30m
Warranty:5 years
Installation:by adhesive,easy to install
Features:Waterproof,UV resistance,aging resistance,eco-friendly,non-toxic,non-pollution...etc.
Certificate:IAAF,SGS,CE,ASTM,ISO9001,ISO14001,ISO45001
Application:stadium,sports center,sports court,gym,school playground...ect.
Ultra-high thermal conductive silicone sheet is a high-performance heat conducting interface material made of 100% imported materials for fillingthe air gaps between the heating device and the heat sink or metal base.Its softness and elasticity characteristics enable it to be used for coveringa very uneven surface. Heat is transferred from the separation device or the entire PCB to the metal casing or diffuser to improve heat dissipationand improve the efficiency of heating electronic components and service
Features & Benefits:
High thermal conductivity, low thermal resistance
Soft and flexible, reducing the interface thermal resistance
High electrical insulation to protect sensitive electronic devices
Natural sticky, easy assembly, re-workable
Meet ROHS and UL environmental requirements
Typical Applications:
CPU, memory module
Communication hardware equipment
High-speed hard disk drive
Automotive engine control module
Microprocessors, memory chips and graphics processors
Military electronic equipment
High thermal conductive silicone pad is a high thermal conductivity material. The raw material is made of Japan Electrochemical High Thermal Conductive Spherical Alumina Powder and Dow Corning Polymer. It is a cost-effective thermal gap filling material. The surface's natural micro-viscosity and softness can well fill the air gaps to transfer the heat between the heat source and the heat sink to improve heat dissipation and improve the efficiency of heating electro-nic components and service life. It is an ideal thermal interface material.
Benefits:
Cost-effective, high conductivity, low thermal resistance
Soft and flexible, reducing the interface thermal resistance
High electrical insulation to protect electronic devices
Natural sticky, easy application, reworkable
Meet ROHS and UL environmental requirements
Applications:
High thermal conductivity module
new energy vehicles
Microprocessors, memory chips and graphics processors
Network communication equipment
Car equipment, charger
High-speed hard disk drive
LCG is a kind of thermal interface material which coating thermal conductive polymer on a layer of fiberglass. The stickiness of the material is slightly weakness for easy procession. And insulation and tear resistance are also better. Its stickiness and flexibility, even in extremely rough and very uneven surface, also can bring a good thermal filling effect.
Features & Benefits:
Fiberglass substrate, anti-puncture, shear and tear resistance
Only the bottom with a sticky, slightly faint on the front, easy to install
High-load, low-hardness gap filling material
Strong electrical insulation
Typical Applications:
AC / DC power supply
Car equipment / charger
Between the motherboard and the chassis
Drive control any heating element
Uninterruptible power supply (UPS)
Power semiconductor-TO packaging products
Floating pneumatic rubber fenders have been in use for around 50 years. It is the leading device for marine application in the world. This compressed air filled rubber fender is used as a protective medium for ship-to-ship operation(STS), ship-to-quay(STQ) and ship-to-berthing(STB).
Florescence Pneumatic Rubber Fender Construction:
Outer rubber: rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.
Inner rubber: liner of a rubber membrane that seals the pressurized air inside the fender.
Synthetic-tyre-cord layer for reinforcement: layer made of synthetic-tyre-cord fabric, which maintains the internal air pressure of the fender.
Bead ring: steel ring which is placed at one end (or both ends) of the fender and holds the end of cord layers
Flange opening: steel flange, which is mounted on the fender, to which an air valve or safety valve can be adapted.
Florescence Pneumatic Rubber Fender Advantages:
1. High energy absorption and with a low reaction force
2. Light weight, portable and floatable, can be installed and replaced easily
3. Heavy duty and long service life-over 10 years
4. Supplied as sling type (body only) or with chain and tire net for protection of the fender body
5. Sizes from 0.5m diameter Ã? 1.0m length up to 4.5m diameter Ã? 12m length
6. Suitable for locations with large and small tidal differences
Classification of floating pneumatic fender:
Fender types:
1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
Initial internal pressure:
1.Pneumatic fender 50 (initial internal pressure 50 KPa)
2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Floating pneumatic rubber fenders have been in use for around 50 years. It is the leading device for marine application in the world. This compressed air filled rubber fender is used as a protective medium for ship-to-ship operation(STS), ship-to-quay(STQ) and ship-to-berthing(STB).
Florescence Pneumatic Rubber Fender Construction:
Outer rubber: rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.
Inner rubber: liner of a rubber membrane that seals the pressurized air inside the fender.
Synthetic-tyre-cord layer for reinforcement: layer made of synthetic-tyre-cord fabric, which maintains the internal air pressure of the fender.
Bead ring: steel ring which is placed at one end (or both ends) of the fender and holds the end of cord layers
Flange opening: steel flange, which is mounted on the fender, to which an air valve or safety valve can be adapted.
Florescence Pneumatic Rubber Fender Advantages:
1. High energy absorption and with a low reaction force
2. Light weight, portable and floatable, can be installed and replaced easily
3. Heavy duty and long service life-over 10 years
4. Supplied as sling type (body only) or with chain and tire net for protection of the fender body
5. Sizes from 0.5m diameter Ã? 1.0m length up to 4.5m diameter Ã? 12m length
6. Suitable for locations with large and small tidal differences
Classification of floating pneumatic fender:
Fender types:
1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
Initial internal pressure:
1.Pneumatic fender 50 (initial internal pressure 50 KPa)
2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. Non-toxic, odorless, two-component liquid silicone rubber, are two-component materials.Resistance high temperature of 250, shrinkage rate lower than 0.1%.
Applications of liquid pad printing silicone rubber
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
Features of liquid pad printing silicone rubber
a. resistance to deformation, high-temperature
b. high printing times
c. good aging resistance
d. exceptional elasticity
e. great printing effect
DESCRIPTION:
Commercial rubber sheet used for gasket & packing purpose in industrial applications. These sheets / rolls are made from Prime polymer blended with reclaim rubber. As it is cured using compression moulding & rotary drum curing system available in smooth & cloth impression finish with or without choice of insertion.
APPLICATIONS:
This commercial rubber sheets / rolls are mainly used for flange gasket packing to avoid leakages from air, water & inorganic chemicals, machinery packing pads, anti vibration pads & flooring purpose.
PROPERTY:
Good resistance to inorganic chemicals, water, air & heat up to 70°C. Poor resistance to Ozone, UV, Sunlight, oil & solvents & organic chemicals. Boron Rubbers India has custom designed this rubber to meet many applications on several different levels while maintaining a very economical basis for a rubber sheets / rolls.
STORAGE OF PRODUCTS
Do not expose rubber sheet to direct sunlight, sheets away from heat source, preferably in dark, air ventilated room will help give longer life & optimum properties
Do not remove polythene packing before use to prevent it from exposure of atmospheric oxygen, ozone & polluted air. Do not store rubber sheet rolls in open, even after covering it with tarpaulin to protect from air & rain. Always keep rolls in vertical position ONLY
Keep rolls away from solvent, oil & fuel storage. Do not use hooks while loading/unloading the rolls. Inspect sheet for smooth surface & hardness (with rubber hardness tester).
DESCRIPTION:
NR / SBR blend rubber sheets / rolls are used in the commercial and industrial applications. This specifically designed rubber material is long-¬lasting that is suitable for operational use which provides excellent mechanical properties like high resilience, low compression set, high resistance to cut, tear & abrasion & also offers resistance to many acids, alkalis & salts. The operation temperature range is (-¬20°C to +80°C). It is available in wide range of hardness from 40 Shore A to 80 Shore A. It has very good physical properties like Tensile strength, wear & tears properties, Abrasion resistance.
APPLICATIONS:
NR / SBR Rubber sheets / rolls are used for wide range of applications like skirt board, bridge bearing, gasket for high pressure packing, heavy weight machinery packing, Para-¬quality for sand/shot blasting machinery & used as shock absorber. NR / SBR Rubber sheets/rolls can be used as shelf liner; workstation table liner and work area rubber lining that can with and moderate chemicals & alkaline solutions. These sheets can also be used for anti-abrasion lining for material handling machinery in mines alike industries
PROPERTY:
Excellent resistance to inorganic chemicals, water, air & heat up to 80°C. Poor resistance to Ozone, UV, Sunlight, oil & solvents & organic chemicals.
STORAGE OF PRODUCTS
Do not expose rubber sheet to direct sunlight, sheets away from heat source, preferably in dark, air ventilated room will help give longer life & optimum properties
Do not remove polythene packing before use to prevent it from exposure of atmospheric oxygen, ozone & polluted air. Do not store rubber sheet rolls in open, even after covering it with tarpaulin to protect from air & rain. Always keep rolls in vertical position ONLY
Keep rolls away from solvent, oil & fuel storage. Do not use hooks while loading/unloading the rolls. Inspect sheet for smooth surface & hardness (with rubber hardness tester)
11162 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
