Find Verified Rubber Items Suppliers, Manufacturers and Wholesalers

Synthetic rubber O-rings used for dynamic and static sealing purposes.
Our O-rings can be produced in NBR, Bromobutyl Rubber, Silicone, EPDM, FKM (Viton), FFKM (Kalrez), HNBR, XNBR, SBR synthetic rubbers.
On customer request, we can also coat our O-rings with a PTFE coating for self lubrication.

We can produce 2 to 4 tons of RSS rubber sheets each month. we can produce high quality of raw rubber. 2 USD per KG
contact us for quote and

Dimensions:
- Width*Length: 36cm * 107cm
- Height: 5 cm
Purpose:
- Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron.
Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can
slide freely along the angle iron to meet the expansion deformation of main grid.
- Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion
joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear
deformation in the telescopic channel helps the whole device to realize telescopic motion.
Features :
- Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and
have a long service life.
- Wear resistance, corrosion resistance.
- Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians.
- During installation, bolt holes on the bottom and each junction are filled with adhesion
agent which makes the whole rubber bridge expansion joints be highly water-resistant.
- Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise.

Material: Rubber & Steel Plates.
Applications:
- Rubber bridge expansion joint is used in expressway.
- Rubber Bridge expansion installed in the end of bridge.
- Rubber bridge expansion joint is used flyover.
- Rubber bridge expansion joint is used in connection of bridge

- Manufactured from durable EPDM rubber.
- High UV & Ozone resistant
- Fast & easy installation.
- Maintenance Free
- Provides a permanent seal for any type of construction
- Allows exerting a continuous and uniform force against the joint walls.

Applications:
- Bridges
- Parapets
- Cark parks
- Buildings
- Tunnels
- Water treatment plants.

Dimensions:
Width: Up to 1500mm
- Length: up to 20,000mm according to thicknesses
- Thickness: 3mm - 25mm according to use and applications.
Description:
Anti-Abrasion Rubber Lining Sheet is a blended natural and synthetic rubber sheet
offering tear and impact resistance & high elasticity. It has excellent resistance to large particle impact and abrasion.
Material : Natural Rubber and Synthetic Rubber
Physical Specification :
- Hardness (Shore A): 5 + 50
- Tensile (MPa): 3.5 min.
- Elongation at break: %300
- Abrasion max: 150mm3
- Temperature Range: 20-c to 70+c.

Color: Standard Black
Optional (Beige, Grey).
Applications:
1. Shot blasting rooms.
2. Parking areas.
3. Wall lining for workshops and factories.

Dimensions:
- MC001AVM: Dia: 44* Height: 41 mm
- MC002AVM: Dia: 44* Height: 44 mm (with steel base thickness 3mm & Dia. 50mm)
Features:
Easy-to-install Universal Mounts
- Provide fail-safe, all-attitude isolation for vehicle cabs, engines, transmissions and other equipment.
- Designed for shock load damping.
- It withstands up to 50 kg per piece and must be installed on a circular fitting base.

Physical Specification:
- Hardness (Shore A): 40 - 80
- Tensile Strength (MPa): 4 min.
- Elongation at break (%): 280 min.
Color: Standard: Black
Applications:
- Anti-vibration Rubber.
- Noise Absorption Rubber.
- Engine, Generator, Motor, Compressor, etc

Dimensions:
450*350 mm
- Thickness: 20mm And many different sizes according to customer requirements
Purpose:
Anti-Vibration Pads are a simple yet effective solution to absorb vibration, and impact and reduce noise from various types of machinery. Using an Anti-Vibration Pad correctly can often be the most cost-effective way to address a high-frequency vibration
Material: Mix from SBR and Natural Rubber

Physical Specification:
- Hardness: 65 + 5
- Tensile: 3.5 N/mm2
- Elongation: 300%

Applications: Appropriate for machinery requiring anti-vibration performance and stability performance
Color: Black

Size:
- Length*Width: 150*150 cm.
- Thickness: 12mm
Advantage of this Tille:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads, sound absorbent.

Indoor flooring:
- Does not react to weather conditions.
- It has no negative effect on children if directly touched according to our customer feedbacks.
- Endurance is more than 2 tons per square meter.
Color: Black.

Applications:
- It is used in sport halls and locations that need Shock absorbers and safety flooring.
- It is used in kidsâ?? areas and schools.

Material: SBR Rubber mixed with PU Binder

Life span: 5:10 years - according to the use

Dimensions:
Width: Up to 1500mm
Length: Up to 50 m.
Thickness: 1.5 - 50 mm.
General Description:
EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance.

Features:
Chloramine resistant
Good heat and compression resistance.
Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid).
Resistant for air conditions.
Applications:
Automotive: Weather stripping and seals.
Wire and cable harnesses.
Window spacers.
Hydraulic brake systems.
Door, window and trunk seals

Roofing: Roof membrane.
Roof coating.
RV roof.
Industrial: Water system O-rings and hoses.
Tubing, grommets, and belts.
Electrical insulations and stinger covers.

Dimensions:
- Width*Length: 11cm * 3.2m
: 8cm * 3.2m
- Thickness: 2cm
Description:
To prevent low of water past a closed gate, seals are provided either on the gate or on the
metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.

Material:
- EPDM.
- Screwed + held by steel sandwich.

Physical Specification:
- Hardness Shore A: 60 - 70
- Tensile (kg/cm2) : 100 kg/cm2
- Elongation at break %.: 450%
- Color: Black

Applications: Water Preventative in rivers Dams

Dimensions:
Width*Length: 15cm * 13m
: 2.5cm * 13m
- Thickness: 1 cm
Description:
To prevent flow of water past a closed gate, seals are provided either on the gate or on
the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.

Material:
- EPDM.
- Screwed + held by steel sandwich.

Physical Specification:
- Hardness Shore A: 60 - 70
- Tensile (kg/cm2) : 100 kg/cm2
- Elongation at break %.: 450%
- Color: Black

Applications: Water Preventative in rivers Dams

Dimensions:
- Width*Length: 20cm * 12m
- Thickness: 1 cm
Description:
- To prevent flow of water past a closed gate, seals are provided either on the gate or on
the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.

Material:
- EPDM.
- Screwed + held by steel sandwich

Physical Specification:
- Hardness Shore A: 60 - 70
- Tensile (kg/cm2) : 100 kg/cm2
- Elongation at break %.: 450%
- Color: Black

Applications: Water Preventative in rivers Dams

1/. Automatic vulcanizer with PLC controler

Automatic vulcanizer for curing silicone or organic rubber moulds.

Features:

1. PLC Automatic intelligent vulcanizing control.
2. Touch-screen control panel.
3. Automatic pressure regulation.
4. Digital temperature controller.
5. Curing cycle timer.
6. Automatic forced cooling
7. Digital display pressure, temperature and time.
8. Maximum pressure protection
9. Hydraulic group with motor pump and oil pressure release valve.
10. Electro-valve controlled plate opening.
11. Environmental and energy saving insulation design to provide a better temperature uniformity and energy cost saving.

Model APM12-I APM14-I APM16-I APM18-I APM20-I
Mould diameter max 12 14 16 18 20
Mould thickness, max 150mm
Heating 6KW 6KW 9.6KW 10.8KW 12KW
Motor 1.5KW
Pressure,max 32T 32T 50T 50T 50T


2/. Automatic vulcanizer
Automatic vulcanizer for curing silicone or organic rubber moulds for centrifgal casting for bucket and accessories , jewelry

Features:
1. Automatic control
2. Automatic pressure regulation.
2. Automatic temperature control
3. Curing cycle timer.
4. Automatic forced cooling
5. Digital display temperature and time.
6. Maximum pressure protection
7. Environmental and energy saving insulation design to provide a better temperature uniformity and
8. energy cost saving.

Model APM12 APM14 APM16 APM18 APM20
Mould diameter max 12 14 16 18 20
Mould thickness, max 150mm
Heating 6KW 6KW 9.6KW 10.8KW 12KW
Motor 1.5KW
Pressure,max 32T 32T 50T 50T 50T


3/. manual rubber vulcanizer press for centrifugal casting

vulcanizer for curing rubber moulds for centrifugal casting.

Features:

1. Automatic temperature control
2. Curing cycle timer.
3. Digital display temperature and time.
4. heating plates with good surfces assure perfect flatness

Model MVP12 MVP14 MVP16 MVP18 MVP20
Mould diameter, max 12 14 16 18 20
Mould thickness, max 150mm
Heating 4.0KW 6.0KW 9.6KW 10.8KW 12KW
Pressure, max 32T 32T 50T 50T 50T

WIRE BRAIDED LPG HOSE FOR HOUSEHOLD AN INDUSTRIAL USE
AS PER IS -9573 (PART-2) OF BIS

Various Sizes Available

O Rings of Different Sizes according to various standards and requirements

Size: 16 mm ± 0.2
Shape: Spherical
Hardness: 58-90 Shore A
Rebound Resilience: >92%
Abrasion: Extraordinary
Food Grade: As per CFR 21 US FDA 177.2600 and EU 1935/2004 and BfR regulations
Service Temperature: Up to 100C
Appearance: White or as per customers requirement

25 mm ¸ rubber balls:
Size: 25 mm ± 0.3
Shape: Spherical
Hardness: 58-90 Shore A
Rebound Resilience: >92%
Abrasion: Par Excellence
Service Temperature: Up to 100 C or as per customers requirement
Appearance: White or as per customers requirement

30 mm ¸ rubber balls:
Size: 30 mm ± 0.4
Shape: Spherical
Hardness: 58-90 Shore A
Rebound Resilience: >92%
Abrasion: Par Excellence
Service Temperature: Up to 100 C or as per customers requirement
Appearance: White or as per customers requirement

32 mm rubber balls:
Size: 32 mm ± 0.4
Shape: Spherical
Hardness: 58-90 Shore A
Rebound Resilience: >92%
Abrasion: Par Excellence
Service Temperature: Up to 100 C or as per customers requirement
Appearance: White or as per customers requirement

36 mm¸ rubber balls:
Size: 36 mm + 0.3
Shape: Spherical
Hardness: 58-90 Shore A�°
Rebound Resilience: >92%
Abrasion: Par Excellence
Service Temperature: Up to 100�°C or as per customers requirement
Appearance: White or as per customersâ?? requirement