Dimensions:
- Width*Length: 36cm * 107cm
- Height: 5 cm
Purpose:
- Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron.
Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can
slide freely along the angle iron to meet the expansion deformation of main grid.
- Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion
joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear
deformation in the telescopic channel helps the whole device to realize telescopic motion.
Features :
- Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and
have a long service life.
- Wear resistance, corrosion resistance.
- Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians.
- During installation, bolt holes on the bottom and each junction are filled with adhesion
agent which makes the whole rubber bridge expansion joints be highly water-resistant.
- Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise.
Material: Rubber & Steel Plates.
Applications:
- Rubber bridge expansion joint is used in expressway.
- Rubber Bridge expansion installed in the end of bridge.
- Rubber bridge expansion joint is used flyover.
- Rubber bridge expansion joint is used in connection of bridge
- Manufactured from durable EPDM rubber. - High UV & Ozone resistant - Fast & easy installation. - Maintenance Free - Provides a permanent seal for any type of construction - Allows exerting a continuous and uniform force against the joint walls. Applications: - Bridges - Parapets - Cark parks - Buildings - Tunnels - Water treatment plants.
The Ozdekan EXpansion Joints are waterproof expansion joints that allow absorption of the deck movements. These joints are manufactured with rubber elements and restrained to the structure with proper anchor bolts. The reinforcing metal profiles made of steel are completely inserted and vulcanized to the rubber. This process is a total guarantee against corrosion and allows a longer life to the product. The rubber compound, too, has been intentionally formulated to resist the oil, grease, petrol, salt and sand, without besides, suffering premature ageing phenomena due to sun rays, salt and snow. All the joints follow the deformations and movements of the structure (the movement can exist with every skew angle from 0° to 90°) by shear deformation of the rubber elements. Anchor bolts, made of steel and protected with anticorrosion treatments, absorb the elastic reactions and all the other kind of mechanical solicitations. The joints are also able to compensate height difference or vertical movements. This characteristic is very important in all the cases where load and movement conditions can cause relative vertical movements. The joint series is manufactured by Ozdekan since 2006. Main advantages: Simple and linear design with few elements Low height of the profile Total impermeable Easy assembling eitheron concrete structure Suitable for the replacement of existing joint Easy and quick to be replaced Good resistance to vehicles sliding Vertical movements absorption The joints are supplied in variable length elements depending to the joint type. A joint line consists in fact of many units joined together with a groove-and-tongue junction welded with special glue. The joint fixing is obtained by chemical anchors; the nuts are locked using a dynamometric key so that permanent compression strength is given to the joint. Stainless steel anchors may be provided on request. In that way the horizontal forces, due to breaking of vehicles and to the reaction that rubber opposes to the joint deformations (shrinkage, creep, thermal variations etc.), are transmitted by friction between the rubber and the concrete. The joints can be assembled on a metallic infrastructure. The joints of bigger movements with four upper grooves are manufactured in order to prevent the lifting of the elements during the contraction. These devices guarantee the adhesion of the elements to the structure and the noiseless of the traffic.
PE (Polyethylene) Expansion Joint Filler Board is a pre-moulded, high performance joint filler board. It has a closed cell and cross linked structure. It has an excellent recovery of 95% (after compression upto 50% of original thickness), which makes it the most suitable product for the said usage. It is an exclusive product specially designed to be used as expansion joint filler in concrete, brick, block work and isolation joints. It is also rot free and has no bitumen. What are the features and advantages of filler board? Resilient â?? Our EJF boards delivers 95% compression recovery after deflection (compression), that it is the most important and excellent attribute for any expansion joint filler boards. Weathering Effect â?? Joint filler board is resilient and additionally absolutely does not distort under less load transfer from wet concrete. Closed cellular composition â?? Very low water absorption consequently non deteriorating and also resilient Bitumen free â?? Non-staining and easy to apply. Chemically Resistant â?? to almost all types of acids, alkalies and hydrocarbon group materials. Simple â?? Easy to handle, carry, load/unload, install. Load absorption is higher and transfers to the structures very little. What is the use of filler board? Expansion joints at airport runways and taxi tracks The next usage are in mall parking lots as well as structures Furthermore these are applied to Isolation Joints to infill sections In addition to water-proofing also used in concrete flooring. Water retaining as well as water eliminating structures Inter-connecting pathways between buildings Basements, flyovers as well as subways. These kind of boards used in concrete roads as well as toll plaza flooring. Bridges, verandas, abutments and pier hinge joints For more details please visit: https://www.kampun.com/expansion-joint-filler-boards-kampun-hd100-board/
Rubber And Plastic Chemical Raw Material
Quality: Stable, Good elasticity and Flexibility, self-life over 12 months Application: Agricultural, Industrial, Electronic, Household, Tie Money, Flower, Hair, Package and Food, etc. Can be used widely as gifts, decorations, mechanical equipment, making gloves, etc.
It's made from natural rubber material with many sizes, colors and shapes. It's the best choice for decorating birthday/wedding party
Origin: Vietnam Material: Rubber band Color: Yellow, Red, Green Diameter: 2cm, 3cm, 5cm Thickness: 2mm, 3mm MOQ: 1MT Packing: 25kgs/carton
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability. Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Name: Rubber band Size: Can be customized Sample lead time: 3~5 working days MOQ: 300kgs Product Features: 1. High Toughness,Good elastic ,Can Be Extended To Seven Times Length Won't Break 2. Environmentally Friendly,Nontoxic ,Anti-aging,Not Stickly! 3. Vietnam Import Natural Rubber ,100% Rubber Content ,Quality Guarantee Standard packing: 100grams/polybag, 200grams/polybag, 300grams/polybag, 30kg/bag,etcâ?¦.or depending on needs of customer. Production lead time: 3 days by store in warehouse and 10-15 working days according to customerâ??s Color and SIZE .(depend on the order quantity)
