Resin Suppliers and Manufacturers

Nitrogen - 46% min Moisture - 1% max Biuret - 1% max Prilled - 0.85-2mm Granular - 2-4mm 90-94%min color - Pure White Radiation - Non-Radiactive Free Ammonia - 160pxt ppm max

SOLID THERMOPLASTIC ACRYLIC RESIN TKA66 Properties Appearance White granular Solid Content 100 Softening Point 141145 Acid Value mgKOHg 405 Tg 50 mpas 25Viscosity 20004300 51 in toluene Solubility It is soluble in esterketone and aromatics It is insoluble in 200 gasoline and alcohol Characters 1Good gloss and hardness 2Good compatibility with CAB 3Good resistance to weather or chemicals 4Good leveling and no after tack 5Good pigment dispersion

Color index, number : 18 Hot alcoholInsolubile,% : 1.00 Application: 1. The plasticity and castability of heating, combined with its ability to absorb a large amount of infiltrated material, is of great value in the casting industry. 2. The lac resin is non-toxic. Based on the excellent characteristics listed above, the shellac resin is applied to alcohol paints, electrical insulating materials, printing inks, rubber fillers, and its use for oil and acid resistance. 3. Other industries: It has a wide range of important application value in many fields such as medicine, food, cosmetics, chemical industry, metallurgy, machinery, woodware, papermaking, electronics and military industry.

Appearance Dark red liquid Capsaicin SHU 1,000,000 Min. Color value CU 10,000 Max. Heavy Metal(as Pb) % 0.0005% Max As % 0.0002% Max Organic solvent residue % 0.005% Max

Locust bean gum is a natural hydrocolloid extracted from locust tree seeds. The endosperm of carob seeds are separated from germ and testa by various processes then ground to locust bean gum. Locust bean gum imparts smooth flow properties, freeze- thaw stability and appropriate thickening to a wide range of products. It also improves gel strength when used in combination with K-Carrageenan. Locust Bean Gum provides brightness high viscosity the whitest coloured and highest gel strength. Locust bean gum dissolves completely above 75 C. Usage level : 0.1 â?? 0.9 %. We mainly produce the following Locust bean Gum grades; Locust Bean Gum A-01 (2800 -3000 cps):Top grade Locust Bean Gum suitable for the products where high viscosity and whiteness are important. Locust Bean Gum A-02 (2400- 2600 cps): Medium grade Locust Bean Gum suitable for the products where high viscosity is not very important. Locust Bean Gum A-03 (2000 -2200 cps): Standard grade Locust Bean Gum suitable for the products where both high viscosity and whiteness are not very important.

Product name Solid acrylic resin Appearance White Powder Solid content 100 % Softening point 130 â?? min Vitrification temperature 50 â?? max Molecular weight 70000 max Character: 1. Super luster and rigidity.  2. With good consistent with CAB. 3. With super character of Resisting the chemical and weathering. 4. Will not adhibit return, good leveling property. 5. It is good to pigment dispersation.

Polyethylene terephthalate (PET), chemical formula (C10H8O4)n, is made from dimethyl terephthalate and glycol transesterification or esterification of terephthalate and glycol to synthesize dihydroxyethyl terephthalate, and then polycondensation reaction. It is a crystal type saturated polyester, which is a milky white or light yellow, highly crystalline polymer with smooth and glossy surface. It is a common resin in life, which can be divided into APET, RPET and PETG. It has excellent physical and mechanical properties in a wide range of temperatures, up to 120â??, and excellent electrical insulation. Even at high temperature and high frequency, its electrical properties are still good, but it has poor corona resistance, creep resistance, fatigue resistance, friction resistance and dimensional stability. Advantages: 1. Good mechanical properties, impact strength is 3~5 times that of other films, good folding resistance. 2 oil resistance, fat resistance, dilute acid resistance, dilute alkali resistance, resistance to most solvents. 3. Can be used in the temperature range of 55-60â?? for a long time, short-term use can resist 65â?? high temperature, can resist -70â?? low temperature, and high and low temperature has little impact on its mechanical properties. 4. Low permeability of gas and water vapor, and excellent resistance to gas, water, oil and odor. 5. High transparency, can block UV, good luster. 6. Non-toxic, tasteless, good health and safety, can be directly used for food packaging.

Polyester chips usually refers to the polyester raw materials obtained from the polymerization production is generally processed into about 4 * 5 * 2 mm or so sheet particles. 1. According to the composition and structure can be divided into: blended, copolymerization, crystalline, liquid crystal, cyclic polyester chips and so on; 2. According to the performance can be divided into: coloring, flame retardant, antistatic, moisture absorption, anti-pilling, antibacterial, whitening, low melting point, viscosity (high viscosity) polyester chips, etc.; 3. According to the use can be divided into: fiber grade polyester chips, bottle grade polyester chips, film grade polyester chips (mainly different process indicators). Fiber grade polyester chips according to which the content of matting agent tio2 can be divided into: super glossy (big glossy), glossy, semi-matte, (full) matte polyester chips. There are also cationic polyester chips. Polyester applications now include fibers, various types of containers, packaging materials, films, films, engineering plastics, and other fields.

Ise glue 400 - urea resin powder Description Ise glue 400 it is a urea formaldehyde resin self-hardening powder adhesive. It is used in the wood Industry for cold and hot-setting and high-frequency bonding. It is characterized by a strong and lasting Bond resistant to water-class c3 rate of binding at room temperature. Application The basic application is in the furniture sector in the bonding of 70 � c - bonding hot. Adhesive ise Glue 400 is used for the manufacture of plywood, furniture, panels of chipboard like. It may be used In the system of high frequency waves. Pol lives and hardering time: 15 � c 20 � c 30 � c 60 � c 80 � c 100 � c 7 hours 4 hours 3 hours 8 minuts 145 seconds 65 seconds Ingredients services europe kamil soltysiak

Specification item value Product name POE Full name Polyolefin Elastomer Grade Injection Grade. Extrusion Grade Sample Available Package 25kgs/bag Appearance Granules Application Wire & Cable, Plastic Modifications, Composite Molding Applications MOQ 25 KG

Specification item value Place of Origin UK Model Number F00952 Product name HDPE LDPE LLDPE Granules Grade Virgin Film Injection Grade Material High Density Polyethylene Virgin Granules Application Packing Containers Films Pipes Usage General HDPE Plastics Colour White Package 25kgs/bag MOQ 250 Ton Appearance White Transparent Granular