Model AM-3 W
Heating medium Water
Temperature range degree 30~100degree
Heating capacity KW 3
Power supply Volt 3Phase-380V-50Hz
Pump Power KW 0.37KW
Max. Flow rate L/min 42L/min
Max. Pressure kg/cm2 2.8kg/cm2
Cooling method Direct cooling
Pipe diameter Heating pipe diameter lnch 3/8
Cooling pipe diameter lnch 1/2
Dimension mm 650x300x500
Weight kg 55
Note: For the water transfer medium MTC, the water pressure should ≥ 2kgf/cm2 when it connect with running water.
Spiral IQF can be divided into simple helix and double helix; it is composed of insulation structure, stainless mesh belt, transmission system, tension device, evaporator, air distribution system, cleaning and drying device, product inlet and outlet, electric control system, etc.
Net belt IQF is composed of heat preservation cabinet and heat preservation door, net belt and transmission system, blast system and ventilator, evaporator and control system, etc.
2. Combined Island Freezer-----SWG-A
Application: Ice cream, Frozen food, Sea Food product.,í¡etc
Dimension: 2000*960*2000mm
Temperature: Up : 2 ~ 8 C , Down: -22 ~ -18 C , All in -22 ~ - 18 C
Voltage: 220V-50HZ
Refri Type: F.
1. Ice-cream Freezer-----BJLG-A
Application: Mainly used in Supermarket, Store, Grocery,..etc.
Dimension: 1200*1080*1230mm , 1600*1080*1230mm
Temperature: - 15 ~ - 12 C
Voltage: 220V-50HZ
Refri. Type: S
Colors: Variable according to the customers require.
Include the following parts in such true commercial refrigerator freezer:
Tecumseh compressor, evaporator, condenser, high pressure switch, low pressure switch, filter, solenoid valve, Danfoss expansion valve, fan motor, DIXELL temperature controls, Receiver(low temperature unit), hot relay, E-heat pipe, electrical box.
Packing type:wooden case
Dimension of CC350M1:Length-1090mm,Wedth-1020mm,Height-805mm;
Loading:37 sets loading in 1*20 FT container,82 sets loading in 1*40 GP container, 102 sets loading in 1*40 HQ container
- To control various temperature (-30 centigrade- +30 centigrade) accurately during industrial production or A/C.
- The series chiller have manufacturing experience for about twenty years, Install an usage simple, support in brief.
- According the requirement, in the same unit, there are more than two independent refrigeration loops.
- Refrigerant: R-22 (can choose R407C/R134a/R410a)
- According the demand of the consumer, it can supply nonstandard unit.
- Water cooled and air cooled specification is well-found (power: 1/2-500HP)
Model: L-YL-C
Temperature range : 2~10
Working voltage : 220V/50HZ
Dimension mm (L*W*H): 700*700*144.
Characteristics of beverage cabinet:
1 Energy saving.
2 Air duct in each shelf for stable temperature.
3 LED illumination lamps for better display effect.
4 Accurate defrosting control and stable performance.
5 Night curtain for long heat insulation time and energy saving.
6 A defrosting evaporation box with a heating pipe.
Features:
1.Hot gas defrosting and energy-saving light.
2.Forced air cooling for rapid cooling rate and good refrigeration effect.
3.Integrated high-density foam and multi-layer glass.
4.Italian units certificated by CE .
Chillers and brine cooling units, Water- or air-cooled. Compact- and split-units with different heat transfer media as well with or without energy saving free cooling system.
1.Temperature -50ípC to 25ípC
2.Cooling Power up to 1.500 kW
3.Pump Power up to 230 m3/min
Industrial chillers water cooled
1.Standard and customer specified
2.Cooling units with open system
3.Chillers: close system, compressor cooling
4.Split arrangement, compact units
5.Water or air cooled
6.Execution with different heat transfer media
7.With or without energy saving free cooling system
8.Operating temperature -50ípC to 60ípC
9.Capacity for heating/cooling up to 3000 kW
Option:
1.Free cooling, compact- or split design, PLC
2.Water analysis/water treatment, layout for demineralized water or ultra pure water possible, with or without monitoring of Ionization
3.Finish in different qualities of stainless steel piping
Application : Process engineering, plastic-, rubber- and glass industry
Combination plants(Cooling and Heating)
These plants are designed and manufactured for an enormous range oft asks. Circulation units with different heat carriers and the specific control cabinet required are combined in one unit. If necessary for technical reasons, our combination units can also integrate refrigeration machines and energy-saving free cooling units or heat recovery. Characteristics:
1.Temperature -50 ípC to 400 ípC
2.Capacity of heating up to 1.000 kW
3.Capacity of cooling up to 1.300 kW ¿C higher capacities realizable!
4.Pump power up to 280 m3/min
Features:
1. Divided in two parts: a hot part for pasteurizing and a cold part for batch freezing.
2. Two speeds, low for Italian gelato and high for high overrun American ice cream.
3. Easy control panel, electronically controlled through a few simple buttons
4. Automatic performance based on a series of predetermined functions in a rapid and repetitive way
5. Unique designed evaporator with gas finely dispersed to í¦Multipointí¦ around cylinder.
6. Patent dasher with high performance, easy to clean and replace.
7. Hardness-control-system (HCS),precisely control the status of mixer
8. Vertical heating tub with outside transfer tube, easy for operating, cleaning and maintenance.
9. Designed with safety devices to protect the operator and the machine from dangers.
10. Practical built-in water hose allowing easier and faster cleaning
11. Automatic audible alarm signals when a process is done
12. R404a refrigerate gas.
Key Features:
LRP18x1-single bowl, capacity is 12 liter,mixsystem is spraying system,and this kind of Commercial Beverage dispensers can maximize sales in any kind of business, grocery stores, coffee shops, hotels, cafes, restaurants, bars, etc. Beverage dispensing machines come in a variety of sizes and options, and you may need a few different types of beverage dispensers to meet the requirements of your clients. Please have a looking here,we may offer a selection of refrigerant equipment-commercial beverage dispensing equipment here.
Dimensions
1. Visual-The product is displayed in a clear transparent container to generate appetite appeal and help you sell more product
2. Compact design- Stainless steel unbreakable handle, all parts in contact with beverages are made of alimentary (food grade) materials and removable by hands (without tools), easy to install and disassemble,all this save your time cost, very profitability.
3. Services-Every drink dispenser is carefully designed and engineered to ensure optimum performance and more running time. It is easy to clean and maintain, and retaining its new appeal to your customers.
4.Structure design-Engineered to be the best-Each shop drink dispenser is uniquely designed to adapt to your needs. This versatility means you can attract more customers with their favorite drinks. The unique evaporator and extra large pump cools more effective and can reduce energy consumption. Its stainless steel cylinder, and front panel provide extra long life as well as easy cleaning.
5. Consistency-Shop drink dispenser's rotary system continuously circulates the product to ensure a fresh and consistent drink every time.
Mainly used for food processing and chemical industries, sea water liquid ice machine is mainly used for fish boats, tube ice machine and ice cube maker are mainly used for humman consumption.
As conventional way to produce block ice is mainly from brine system, first you have to freeze the brine water, then put the ice can into the brine tank, then take out the ice can for harvesting block ice after 20 hours or more. This system is complicate and you have to do a lot of civil work.
Our new system is using aluminum plate as ice can, the refrigerant will be evaporated inside the aluminum plate so the plate can freeze ice making water quickly. This is the compact system and it is plug-ready and built for tropical conditions and coastal climate.
1. Range (temperature difference): 5 or 10 centigrade degrees designed. More than 20 Celsius range is available;
2. Capacity: 6~1000WT(water ton, cubic meter per hour) for cell. Multi-cell available;
3. Approach: Suggesting more than 3 centigrade degree to wet-bulb Temp;
4. Shape: Spherical/ bottle neck /square/rectangle/polygonal are optional;
5. Flow type: Counter flow type/cross flow type/open circuit type/closed circuit type.
