Inspection Testing Suppliers and Manufacturers

Product Code Product Description PRS-ZE0080 Field Inspection Testing Kit PRS-ZE0082 Field Inspection Pocket Vane Tester PRS-ZE0082/1 Extension Rod for PRS-ZE0082 PRS-ZE0084 Heavy Duty Pocket Penetrometer, 0-10 kgf/cm2 STANDARDS : ASTM D2573 The PRS-ZE0080 Field Inspection Testing Kit is ideal for geotechnicians, geologists and agronomists. It consists of the PRS-ZE0084 Pocket Penetrometer and of the PRS-ZE0082 Field Inspection Pocket Vane Tester. The instrument is contained in a practical carrying case. PRS-ZE0080 Field Inspection Testing Kit Dimensions (packed) 240x210x50 mm Weigth (approx.) 1.8 kg The PRS-ZE0082 Field Inspection Pocket Vane Tester is especially designed to measure the undrained shear strength (CU) of cohesive soils, consists of a cylindrical body with a torsional spring and three interchangeable vanes of different sizes used depending upon the expected strength of the soil. The height/diameter ratio of all vanes is 2. During operation the vane is driven for 5-6 cm into the soil and then turned with the handle. Deep measures (i.e. on the top of undisturbed samples) can be obtained using the extension rod. All stainless steel construction. Supplied in a plastic case. Extension rod should be ordered separately. PRS-ZE0082 Field Inspections Pocket Vane Tester Vane Dimensions (height x dia.) 32x16; 40x20, 50.8x25.4 mm Measuring Range 0 to 240 kPa (0-24 N/cm') Torque Value 5 N - m Extension Rod 500 mm depth. Overall Dimensions (assembled) 310x105 mm Weight 1.3 kg The PRS-ZE0084 Heavy Duty Pocket Penetrometer is designed for making field classification of cohesive soils in terms of consistency, shear strength and approximate unconfined compressive strength. Heavy duty model is all stainless steel construction, three interchangeable tips: 4.5 mm dia. for very hard soil, 6.35 mm for medium and soft soil, 8.98 mm for soft soil. Supplied complete with plastic case. PRS-ZE0084 Heavy Duty Pocket Penetrometer Measuring Range 0 to 10 kgf/cm' Dimensions (assembled) 210 mm length x 20 mm dia. Weight (approx.) 0.5 kg

Inspection Testing Hammer Non sparking tools are widely used in petroleum industry , chemical industry , power generation, railroad, mining, etc. Specification Model LJ-JCC Type Inspection Testing Hammer Dimensions (L x W x H) (mm) 490*125mm Handle Wood Length 50CM

The clenbuterol rapid test can be used to determine the clenbuterol residue in the tissue.The sensitivity is up to 1ppb. The major advantages of the one step test strip are that results can be obtained within 10 min and that all reagents are included in the test device.It relatively has many other advantages such as lower cost , fewer lable and berif sample preparation than the traditional test methords .

Nkbiotech one step organophosphorus pesticides test strip is a rapid test to qualitatively detect the presence of organophosphorus pesticides in specimens. The major advantages of the one step test strip are that results can be obtained within 10 min and that all reagents are included in the test device.It also relatively has many other advantages such as lower cost , fewer lable and berif sample preparation than the traditional test methods .This product can be used in testing the exist of pesticides in vegetables and fruit rapidly and conveniently outside in the opendoors ., it also possible to detect sulfamethazine below the maximum residue limit in muscle, tissue after a simple sample preparation.

The one step sulfamethazine test strip is a rapid test to qualitatively detect the presence of sulfamethazine in specimens at the sensitivity of 10ppb. The major advantages of the one step test strip are that results can be obtained within 10 min and that all reagents are included in the test strip. It relatively has many advantages such as lower cost , fewer lable and berif sample preparation than the traditional test methods . Using the one step sulfamethazine test strip, it is possible to detect sulfamethazine below the maximum residue limit in muscle, tissue after a simple sample preparation.

Inspection Testing Hammer Non sparking tools are widely used in petroleum industry , chemical industry , power generation, railroad, mining, etc. Specification Model LJ-JCC Type Inspection Testing Hammer Dimensions (L x W x H) (mm) 490*125mm Handle Wood Length 50CM

It is used for testing mechanical properties of the inspection chambers and the manholes. It can take load test for the chamber body and ring-stiffness test, lateral compression test, Ring-tiffness test for the chamber riser. Beside the above tests, This machine can be also used for various products' external load resistance test. It is ideal testing equipment for factories, mines, science research department. Available standards: Bs en13598-1:2003 plastics piping systems for non-pressure underground drainage and sewerage - unplasticized poly(vinyl chloride) (pvc-u). Polypropylene (pp) and polyethylene (pe) - part 1: specifications for ancillary fittings including shallow inspection chambers Bs en13598-2:2003 plastics piping systems for non-pressure underground drainage and sewerage - unplasticized poly(vinyl chloride) (pvc-u). Polypropylene (pp) and polyethylene (pe) - part 2: specifications for manholes and inspection chambers in traffic areas and deep under Main technical parameters: Max load: 100kn Measuring range: 1%--100% Load resolution:1n Load measuring accuracy: 1% Speed accuracy:5% Load speed: 5-50mm/min Gate model:4.5mïwidth1.8mïength :2.5mïvalid test space1.71.72.7m

Film face plywood (shuttering, formwork f17) hdo plywood, birch face plywood (uv, pigment), melamin face plywood, hpl plywood, commercial plywood (cdx plywood, core ply for sofa), lvl structural timber, acacia tabletop, coutertop panel, wood furniture (kitchen cabinet), mouldings primed (by pine fj and mdf), chipblock, acacia wood chip, wood pellets, veneer face....Inspection wood products, checking suppliers in vietnam

Sandeep Garg & Company equipped with the latest XRF analyzers for accurate reading on any metal. Our XRF alloy analyzers are portable hand-held devices that follows stringent quality control norms to ensure the requisite quality of metal scraps as per the contractual standards.

Golf balls.Inspection agent