Sodium Sulphide 60% purity red iron content from 1500ppm to 150ppm Sodium Sulphide 60% purity yellow flakes iron content from 150ppm to 5ppm Sodium Sulphide Solid packed in 150 iron drums ,24.9mts/fcl Packed in 25kg PP bags inside PE bags. 25mts/fcl Packed in 25kg PP bags inside PE bags,22.5mts/fcl
Result NaHS (%) 70.0 Min 70.8 Na2S (%) 0.5 Max 0.5 Na2SO3 (%) 1.5 Max 1.03 Fe (%) 0.003 Max 0.0029 NaCO3 (%) 1.0 Max 1.0 Matter insoluble in water (%) 0.005Max 0.005 Packed in 25kg PP bags inside PE bags.22mts/fcl
Catechu (Katha) 20 kgs packing
A lime content of above 95% is necessary, used in leather tanneries Per bag 50kg, packed in standard hdpe bags
Product Name: sodium salt CAS RN.: 141-53-7 Molecular Formula: CHNaO2 Appearance: White powder, it is hydroscopic; Ahs slight formic acid smell. M. P.: 253¦C Relative Density: 1.919g/cm3 Solubility: Soluble in water and glycerin, slightly soluble in ethanol, insoluble in ether. Use: For alkyd resin paints, plasticizers, high explosives, acid-proof materials, aeroplane oil, adhesive additives etc.
Shafi reso - chem is speciality manufacture of leather chemicals with the collaboration alpa italy. Its deal in raw to finish chemicals for garment, shoe upper, goods and uphostory leather. 25 kg to 50 kg bags. 100 kg. Durms.
Myrobalam powder
We have large range of casein, it varies from applications. 25kg craft paper bag with ld inner liner.
Fine tara powder Character-stics of curtan-150: Physical aspect beige color fine powder Granulometry mesh 150 (90% passing through mesh 150) Tanning matters 55% +/- 2.5 Ph (10% solution) 3.5 +/- 1.0 Moisture content max. 12 The product curtan-150 is soluble in water and posses natural acidity that permits a very good tanning stability for the transformation of the previously prepared skin material into leather. Curtan-150 can also be used along with other vegetable and synthetic tanning agents. In case of interest, we can attend requirements for june/july 2006 shipment at usd 1130 per mt fob callao port peru ; in lots of 21 mts, packed in 25 kg new polypropylene bags, in 20 ft. Containers.
Leather dye Packing will be 25 or 50 kg MS drum only
We want to introduce our company POPLONCHEMIE as an ISO 9001:2008 certified company started in 2002 in INDIA which is into manufacturing and exports of LEATHER TANNING CHEMICALS around the world with our dealer network and agents. Our products are as follows : BEAMHOUSE AUXILIARIES ( Acid and Alkali Bate, Enzymes, Liming Agents, Sequestering Agent, Basifying Agent, Fixing Agent, Degreasing Agent, Deliming Agent, Levelling Agent , Wetting Agent etc) SYNTANS ( Chrome Syntan, Replacement Syntan, White Syntan, Amino Plast Resin Syntan, Gluteraldehyde, Melamine Syntan, Aqueous Melamine Syntan, Styrene Maelic Syntan, Acrylic Resin Syntan, Neutralising Syntan, Napthalene Sulphonic Acid condensate, Phenol Condensate etc) VEGETABLE EXTRACTS ( Mimosa, Quebracho, Tara, Wattle, Myrobalan, Chestnut etc) FATLIQUORS ( Sulphited Fish Oil, Vegetable Oil, Synthetic Fatliquor, Semi- Synthetic Fatliquor, Solvent based Fatliquor, Sperm Oil, Castor Oil Based Fat, Lanolin Fatliquor, Lecithin Fatliquor, Synthetic Light Fast Fatliquor, Cationic Fatliquor etc.) FINISHING CHEMICALS ( Binders, Laquers, Waxes, protein etc)
Myrobalam
Detailed Information Classification: Formic Acid CAS No.:64-18-6 Other Names: Methanoic Acid MF: HCOOH EINECS No.: 200-579-1 Place of Origin: Shandong, China (Mainland) Grade Standard: Industrial Grade Purity: 85% Appearance: colorless transparent oily liquid Application: Mainly used in pesticide, rubber, leather, dyes, pharmaceutical field Brand Name: PLS formic acid Model Number: 85% formic acid Irritating odor: oily liquid Dangerous Class: 8 class Appearance: Colorless transparent liquid,with irritating odor. Storage: formic acid 85% should be Store in cool place. Keep container tightly closed in a dry and well ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. formic acid for sale formic acid 85% for leather Formic Acid for Tanning formic acid for leather tanning 85% min formic acid
Sodium lignosulfonate is used as a defoamer in papermaking in the food industry and as an adhesive in articles that come in contact with food. It has antiseptic properties and is used as an ingredient in animal feed. It is also used in construction, ceramics, mineral powder, chemical industry, textile industry, metallurgical industry, petroleum industry, flame retardant materials, rubber vulcanization, organic polymerization. It is a pepsin inhibitor. sodium lignosulfonate uses in construction The applications of lignin and its modified products are mainly in the following aspects: (1) Cement and concrete water reducer: Lignosulfonate is currently the most widely used water reducer. In 1935, successfully developed a water-reducing agent with lignosulfonate as the main component. Since then, mankind has begun the research on lignosulfonate water-reducing agent. The use of lignosulfonate as a water reducing agent for cement and concrete can not only greatly improve its fluidity and plasticity, but also greatly reduce harmful pores and significantly enhance compressive strength. (2) Dispersant, flocculant and corrosion and scale inhibitor: Lignosulfonate is an anionic surfactant with excellent performance, which can be used as dispersant, flocculant, etc. (3) Oilfield chemicals: Lignosulfonates have a special molecular structure and are widely used in oilfield chemicals. They are often used as tertiary oil recovery surfactants, drilling fluid treatment agents, and water shutoff agents. (4) Synthetic resin: Since the 1990s, lignin has often been used as a basic renewable material for synthetic polymer materials, resins and adhesives. (5) Polymer materials: Lignin and its derivatives can be blended with polyvinyl chloride (PVC), polyethylene (PE), polyvinyl alcohol (PVA) and other olefin polymer materials to improve the stability, strength and Anti-photolysis and other properties. Liu Chunfang and others added lignosulfonate to rubber as a rubber reinforcing agent, which can improve the mechanical properties of rubber. Li Haijiang and others compounded hydrolyzed lignin with natural rubber to form an interpenetrating network structure, and then prepared a lignin-natural rubber compound by co-precipitation. (6) Agricultural additives: Sodium lignosulfonate can be used not only as a pesticide dispersant, but also as a wetting agent, complexing agent and fertilizer enhancer, and is widely used in all aspects of agriculture.
Sodium lignosulfonate is used for ceramic binder, cement water reducer, charcoal binder and grinding dust sag binder
It is produced by reed as raw material and produced by low pollution technology,sodium lignosulfonate is with good solubility, high surface activity and dispersing ability.It is a sulfonate derivative contents benzoic acid and carboxyl.It's adhesion, dispersion and chelation are widely used in various industries to improve its physical and chemical properties, save costs and improve efficiency.
Sodium lignosulfonate It is produced by reed as raw material and produced by low pollution technology,sodium lignosulfonate is with good solubility, high surface activity and dispersing ability.It is a sulfonate derivative contents benzoic acid and carboxyl.It's adhesion, dispersion and chelation are widely used in various industries to improve its physical and chemical properties, save costs and improve efficiency. Mainly export for Concrete: Polycarboxylate superplasticizer is a new type of water reducing agent. The water reduction rate is generally around 20%, but it has high requirements for cement and sand of concrete.If the mud content in the sand is slightly larger, the polycarboxylate superplasticizer has a water reduction rate of 0.However, the technical team found that when using polycarboxylate superplasticizer's dosage is 6% of weight with sodium lignosulfonate's dosage 4%-6%,the water reduction rate will reach the most ideal water reducing ratio and the cost of concrete admixture is also the most economical.Because of the characteristics of calcium and magnesium ions in Sodium lignosulfonate, it is easy to occur precipitation and discoloration when mixed with polycarboxylate superplasticizer.
Sodium formate MF:CHNaO2 Other Names:Sodium Formate,Sodium Formate 92%,Sodium Formate 95%,Sodium Formate 98% Cas no.:141-53-7 EINECS No:205-488-0 Hs code:29151200 Appearance:White crystal & powder Key words:sodium formate,sodium formate usage,sodium formate application,sodium formate PH,Sodium Formate Manufacturer,Sodium Formate Supplier,Sodium Formate 92%,Sodium Formate 96%,Sodium Formate 95%,Sodium Formate 97%,Sodium Formate 98%,Sodium Formate MSDS,Sodium Formate SDS,Sodium Formate Price,Sodium Formate Manufacturer,Sodium Formate Supplier,Sodium Formate Exporter,Sodium Formate PH,Sodium Formate SDS,Sodium Formate MSDS Purity:93%/95%/98% Welcome to contact with usã?? Email:sales03@bossory.com
