Material: Stainless Steel 316
Technique: investment casting
Surface Treatment:: Mirror polishing
Type: DRAIN PLUG
Size: 1/2 inchesModel No.:
The surface is mirror polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion resistance .
The black black rubber washer between the cap and drain plug body makes the sealing performance better.
Zhibo is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.
Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details!
1) Safety valves are overpressure protection devices for protecting personnel and equipment, and usually installed in HP operation line for cementing/fracturing pumps, pressure vessels and other equipment under HP and high displacement.
2) The preset pressure value ranging 5000psi to 15000psi(35MPa to 105MPa) is adjusted through the top nut. When pumping pressure or operating pressure exceed the preset value, the safety valves will automatically open for pressure release. While the pressure is less than the preset value, they will be automatically closed.
3) The model of safety valve available: AQF02-105, AQF02-42,rated: 6000psi(42MPa)-15000psi(105MPa).
Construction, connecting mode and size are same as SPM equivalent products;
The butterfly spring inside can realize opening/closing of valves, therefore safety valves can protect people and equipment without shutting down relevant equipment. They are more reliable than shear type safety valves.
Model
Name
Rated pressure
Connection
AQF02-105
2? safety valve
105MPa
2?FIG1502 tool joint pin X 2?LP
AQF02-105
2? safety valve
105MPa
2?FIG1502 tool joint pin X 2? tool joint box
AQF02-140
2? safety valve
140MPa
2?FIG2002 tool joint pin X 2? tool joint box
Casting ability
Casting weight: max 400 kg;
Casting thickness: min 0.6 mm;
Baoji tuopusen metal co., ltd is specialized in titanium casting. All products are made specifically for our clients according to their requirements, designs, and specifications. We offer our full line of technical assistance, quality assurance, testing, and certification to you.
Casting Ability
Casting Weight: Max 400 kg
Casting Thickness: Min 0.6 mm
Baoji Tuopusen Metal Co., Ltd is specialized in titanium casting. All products are made specifically for our clients according to their requirements, designs, and specifications. We offer our full line of technical assistance, quality assurance, testing, and certification to you.
- This is a IBR approved in line FLOW CHECK VALVES for use in any application Water, Condensate, Liquid etc.
- Ensure that there is no reverse flow in the line.
- Maximum pressure 47.5 kg/cm2 at 105°c.
- Material ASTM A 315 Gr. CF8M (SS 316).
- Easy installation, fits between flanges joint in any class.
- Sizes available 15 NB to 100 NB, large size available on request.
- Valve must be fitted with the direction of flow being according to the direction arrow indicated on the body of the valve.
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB & 50 NB. Class 800
Options : IBR OR Non - IBR.
Material : Forged Steel Body With SS Internals
End Connections : Screwed BSPT
Socket Weld
Butt Weld
Max. Temperature : 427o C
Max. Pressure 139 kg / cm2
Three way valve which design for diverting or mixing service applications. A diverting service valve takes common stream and splits it into two outlet force, this configuration is used for applications such as level control and pump bypass control valve.
Mixing service valve combines two fluid streams and discharges the mixed fluid to a common outlet ports this configuration is used for applications where two fluids need to be mixed the end result can range from temperature control to producing a new fluid.
Three way valve actually performs of two opposite acting standard two way valves. So that use of one valve instead of two is very economical.
Valves are available with hand wheel if required.
Size : 15 NB to 300 NB
Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request
Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A217 Gr WC6) / SS (CF 8M)
Leakage Class : ANSI B 16.104 CL IV
Range Ability : 40 : 1
Our pressure relief safety valve is designed as a pop up type valve. On exceeding set pressure the valve opens to discharge the excess built up pressure.
After relieving excess pressure, the valve automatically returns to the original position. The bronze internals (Seat & Plug) ensure that there is no leakage while in operation.
By replacing only the spring it is possible to change set pressure range.
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB, 50 NB
End Connections : Screwed BSP
IBR Certificate : Available For IBR Applications
Soft-Seating : Also Available For Air Application
Maximum Operating Temperature : 235° C
Available Range : Min. Blow Off Pressure 0.35 Kg/Cm2 Max. Blow Off Pressure 17.5 Kg / Cm2
PRDS Valves ( Combined Pressure Reducing Cum Desuperheating Valves )
Features :
Our combine PRDS valve is a single seated globe type valve that combines pressure & temperature reduction in one compact solution. The high pressure, high temperature steam which enters the main branch, is reduced in pressure and then spray water is injected immediately after pressure reduction.
The high velocity and turbulent flow conditions data present immediately following the pressure reduction allow for rapid atomization and absorption of the spray water thus effectively desuperheating the steam.
Reduction of noise level due to mist formation by water is an added advantage.
Size : 15 NB to 300 NB
Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request.
Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A21? Gr WC6) / 55 (CF 8M)
Leakage Class : ANSI B 16.104 CL IV
Range Ability : 40 : 1
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB & 50 NB. Class 800
Options : IBR OR Non - IBR.
Material : Forged Steel Body With SS Internals
End Connections : Screwed BSPT
Socket Weld
Butt Weld
Max. Temperature : 427o C
Max. Pressure 139 kg / cm2
Standard or Nonstandard:Standard
Structure:Ball
Pressure: Medium Pressure
Power:Hydraulic
Material:Brass
Temperature of Media:Normal Temperature
Media:Water
Port Size:1/2"-2"
Place of Origin:Zhejiang, China (Mainland)
Model Number:BW-F02
Brand Name:Bestway
Application:water tank
Product name:high fashion 2 Inch water tank brass float ball valve
Surface:Natural Brass
Testing Pressure:100% Tested with 0.6MPa - 0.8MPa by Air.
Connection: Male
Technics:Forged
Thread:NPT or BSP
OEM Acceptable:Yes
The sprinkler pipe valve, which is designed as a result of long R&D studies according to the needs of customers, has many advantages compared to other products such as:
It has a stylish and aesthetic design,
It is lighter than other line valves,
It prevents overturning with a removable plate,
It is resistant to 16 Bar pressure,
Its a mixture of special materials makes it strong and prevent from breaking
It has an automatic cut gasket system preventing the leakage,
The latches are covered with aluminum over the metal,
Lifetime guarantee against failure against corrosion.
FREE-VALVEs screw foot valve is a kind of energy saving valve, usually installed at the bottom of the suction pipe of pump. The functions of foot valve are designed to stop water from going backwards when the pump shuts off and only allow the water flow forward . As many inlet and stiffeners are designed on the valve bonnet , the valve is not easy to clog . The foot valve is usually applied at suction pipe . The valve disc usually designed as signal disc ,and connection method is flange .
Features
1.Screw foot valve is composed of valve body, disc, cover,strainer basket, sealing ring and other parts.
2.The disc is moved up and down under fluid pressure drop between inlet and outlet to realize the valve opening and closing. The valve opens under the pressure of the fluid.
3.When the pump stops working, the valve will be shut off quickly under pressure of outlet pipe , and the liquid will not flow back to the water source, which will help the water suction pump and save water loss.
4.Flow area is 2 to 3 times of the pipe area about stainless steel or carbon steel strainer basket.
Technical Specification:
1.Size Range: NPS2~NPS8,DN50~DN200
2.Applicable Temperature: 0~300
3.Connection Type: screw
4.Sealing material: soft sealing or hardness sealing
5.Material of main partsWCB,stainless steel
6.Test standardGB/T13927,API598
Application:
FREE-VALVEs screw foot valve is designed for using in irrigation as well as other pumping applications where water may be dirty due to suspended silt and sand. It offers extremely low head loss. Valve body is cast steel construction. Ports are female screw for easy installation.
FREE-VALVE's flange foot valve is a kind of energy saving valve, usually installed at the bottom of the suction pipe of pump. The functions of foot valve are designed to stop water from going backwards when the pump shuts off and only allow the water flow forward . As many inlet and stiffeners are designed on the valve bonnet , the valve is not easy to clog . The foot valve is usually applied at suction pipe . The valve disc usually designed as signal disc ,and connection method is flange .
Features
1.Flange foot valve is composed of valve body, disc, cover,strainer basket, sealing ring and other parts.
2.The disc is moved up and down under fluid pressure drop between inlet and outlet to realize the valve opening and closing. The valve opens under the pressure of the fluid.
3.When the pump stops working, the valve will be shut off quickly under pressure of outlet pipe , and the liquid will not flow back to the water source, which will help the water suction pump and save water loss.
4.Flow area is 2 to 3 times of the pipe area about stainless steel or carbon steel strainer basket.
Technical Specification:
1.Size Range: NPS2~NPS20,DN50~DN500
2.Applicable Temperature: 0~300
3.Connection Type: Flange or screw
4.Sealing material: soft sealing or hardness sealing
5.Material of main partsWCB,stainless steel
6.Test standardGB/T13927,API598
Application:
FREE-VALVE's flange foot valve is designed for using in irrigation as well as other pumping applications where water may be dirty due to suspended silt and sand. It offers extremely low head loss. Valve body is cast steel construction. Ports are female screw or flange for easy installation.
FREE-Valves Bi directional knife gate valves are known as slurry gate valves. Its are bidirectional valve deals with flow in both directions, while offering zero leakage. The U shape peripheral seat design ensures full-port flow and non-clogging shutoff.The disc bottom of knife gate valve is made into a blade shape with the purpose to cut some soft materials such as fiber,pulp or wood pulp, and it also serves favorable closing and opening.
Features:
1) Knife gate valve is Bi directional,zero leakage,withstanding high differential pressure and full bore valve with minimal seat cavity for maximum flow capacity.
2) No groove is designed on the valve seat,which prevents accumulating media on the sealing surface, and thus avoids sealing surface leakage or disc blockage cause by media accumulation.
3) The integrated body structure with precision casing.
4) U shaped resilient seat is embed into the body and is well connected with the gate,and the friction is reduced during the upward and downward movements of the gate.This greatly prolongs the using life of the seat and realized bi directional sealing.
5) Replaceable flexible wire reinforced elastomer seat ensures bi-directional zero leakage shutoff.
6) Full port flow path with minimal pressure drop achieved through full port valve design.
Technical Specification:
1)Size Range: NPS2~NPS48,DN50~DN1200
2)Pressure Range: Class 150 /PN6 /PN10
3) Applicable Temperature.: 0~200
4) Connection Type: wafer
5) Sealing material: Rubber,PTFE
6) Body Material: Ductile Iron
7) Disc material:Stainless steel
8) Pressure test:GB/T13927, API598
9) Face to Face: GB/T12221, API609
10) Valve body : GB/T12224,ASME B16.34
Operating Mode: Hand wheel,Bevel Gear,Pneumatic,Electric,Hydraulic
Application:
1. Mining, coal washing, iron and steel industry used for washing coal pipes, filter slurry pipes, discharging ash pipes, etc.
2. Purification system used for waste water, mud, sewage and water with suspended solids.
3. Paper industry used for any mixture of pulp, material and water of any concentration.
Free-valve's triple offset butterfly valve adopt triple offset principle to design, makes the movement track on facing space reach to idealization, and there are no attrition and no intervene between sealing pair , furthermore, the sealing material has been selected reasonably, thereby it ensure sealing performance, wear resistance, high temperature resistance capability of valve.
Features
1. Reliable sealing, convenient operation, opening and closing fast.
2. It adopt triple offset elasticity or multiple layers hard sealing configuration, the hermetical capability can reach to reliable sealing performance.
3. The seal of disc can be replaced by loosening the disc ring bolts, saving the cost of the valve.
4. According to the requirements of medium conditions, overlaying or spray welding different sealing materials on the sealing surface of the valve seat.
5. It has characteristic of super long usage life, frictionless closure, high temperature etc.
tions
1) size rangenps2~nps60 dn50dn1500
2) pressure rang eclass 150~class 300 ;pn10 pn40
3)body materialcarbon steel, stainless steel & other materials
4) sealing materialstainless steel, hard alloy& other materials
5) connection methodflange, wafer, weld .
6) operating methodworm gear, electric, pneumatic .
7) pressure test:gb/t13927; api598
8) face to face: gb/t12221; api609.
Applicable
Free-valve's triple offset butterfly valve is applied to use in heating system, chemical, petroleum, natural gas, refining, energy , power plant condensates waterworks, water treatment and the role of regulating valve.
