High performance thermoplastic material, 30% carbon fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, very easy flow, FDA food contact compliant, colour black.
Typical Application Areas:
Complex geometries with thinner cross sections or longer flow length where higher strength in a static or dynamic system is required. Excellent wear resistance, low coefficient of friction, low coefficient of thermal expansion. Chemically resistant to aggressive environments.
VICTREX PEEK
PEEK 90G/150G/151G/381G/450G/650G
PEEK 90GL30/150GL30/450GL30/650GL30
PEEK 150GL20/450GL20
PEEK 90CA30/150CA30/450CA30/650CA30
PEEK 150FC30/450FC30
PEEK 150G903 Blk/450G903 Blk
PAEK WG 101/102
PEEK Film APTIV 1000/1100/1300/2000/2100 Series
High performance thermoplastic material, 30% carbon fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, easy flow, FDA food contact compliant, colour black.
Complex geometries with thin cross sections or long flow length where higher strength in a static or dynamic system is required.
Excellent wear resistance, low coefficient of friction, low coefficient of thermal expansion. Chemically resistant to aggressive environments.
VICTREX PEEK
PEEK 90G/150G/151G/381G/450G/650G
PEEK 90GL30/150GL30/450GL30/650GL30
PEEK 150GL20/450GL20
PEEK 90CA30/150CA30/450CA30/650CA30
PEEK 150FC30/450FC30
PEEK 150G903 Blk/450G903 Blk
PAEK WG 101/102
PEEK Film APTIV 1000/1100/1300/2000/2100 Series
High performance thermoplastic material, 30% glass fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, FDA food contact compliant, colour natural/beige.
Applications for higher strength in a static system. Low coefficient of thermal expansion. Chemically resistant to aggressive environments, suitable for sterilisation for medical and food contact applications.
VICTREX PEEK
PEEK 90G/150G/151G/381G/450G/650G
PEEK 90GL30/150GL30/450GL30/650GL30
PEEK 150GL20/450GL20
PEEK 90CA30/150CA30/450CA30/650CA30
PEEK 150FC30/450FC30
PEEK 150G903 Blk/450G903 Blk
PAEK WG 101/102
PEEK Film APTIV 1000/1100/1300/2000/2100 Series
High performance thermoplastic material, 30% glass fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, FDA food contact compliant, colour natural/beige.
Applications for higher strength in a static system. Low coefficient of thermal expansion. Chemically resistant to aggressive environments, suitable for sterilisation for medical and food contact applications.
VICTREX�® PEEK
PEEK 90G/150G/151G/381G/450G/650G
PEEK 90GL30/150GL30/450GL30/650GL30
PEEK 150GL20/450GL20
PEEK 90CA30/150CA30/450CA30/650CA30
PEEK 150FC30/450FC30
PEEK 150G903 Blk/450G903 Blk
PAEK WG 101/102
PEEK Film APTIV 1000/1100/1300/2000/2100 Series
Solvay Halar 6012 F
Halar ECTFE, a copolymer of ethylene and chlorotrifluoroethylene, is a semi-crystalline melt processable partially fluorinated polymer. It is available in different grades that are specifically designed for electrostatic powder coating.
Halar ECTFE is particularly suitable for use as a coating material in protection and anti-corrosion applications thanks to its unique combination of properties.
Key features
Very good chemical and thermal resistance
Optimum permeation resistance
Outstanding flame resistance
Very good surface characteristics
Surface smoothness
Purity
Markets and Applications
Typical applications served by Halar ECTFE include those in contact with highly corrosive or ultrapure chemicals such as strong inorganic bases and strong mineral and oxidizing acids including:
Vessels
Reactors
Semiconductor chemical storage tanks and ductwork
Piping systems
Centrifuges
Agitators
Exhaust hoods
Filters
Electroplating equipment
Grades:
SOLVAY ECTFE Halar 1400LC
SOLVAY ECTFE Halar 350LC
SOLVAY ECTFE Halar 500LC
SOLVAY ECTFE Halar 513LC
SOLVAY ECTFE Halar 930LC
SOLVAY ECTFE Halar 5001C
SOLVAY ECTFE Halar 930LCW
SOLVAY ECTFE Halar 700HC
SOLVAY ECTFE Halar 2408DA
SOLVAY ECTFE Halar 2508DA
SOLVAY ECTFE Halar 300DA
SOLVAY ECTFE Halar 558
SOLVAY ECTFE Halar 6012F
SOLVAY ECTFE Halar 6014/6014F
SOLVAY ECTFE Halar 6514
SOLVAY ECTFE Halar 6614
SOLVAY ECTFE Halar 6914
SOLVAY ECTFE Halar 7114
SOLVAY ECTFE Halar 901
SOLVAY ECTFE Halar 902
SOLVAY ECTFE Halar XPH-940
Packing spec: 25kgs per drum.
We can give discount according to order quantity.
13907 Plastic Raw Materials Suppliers
Short on time? Let Plastic Raw Materials sellers contact you.
PEI+45% Glass fiber and mineral filled, SABIC ULTEM 3452
The ULTEM Resin family of amorphous thermoplastic polyetherimide (PEI) resins offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM is available in transparent and opaque custom colors, as well as glass filled grades. Plus, ULTEM copolymers are available for even higher heat, chemical and elasticity needs. ULTEM resins uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom.
PEI+45% Glass fiber and mineral filled, SABIC ULTEM 3452
The ULTEM Resin family of amorphous thermoplastic polyetherimide (PEI) resins offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM is available in transparent and opaque custom colors, as well as glass filled grades. Plus, ULTEM copolymers are available for even higher heat, chemical and elasticity needs. ULTEM resins uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom.
PEI+45% Glass fiber and mineral filled, SABIC ULTEM 3452
The ULTEM Resin family of amorphous thermoplastic polyetherimide (PEI) resins offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM is available in transparent and opaque custom colors, as well as glass filled grades. Plus, ULTEM copolymers are available for even higher heat, chemical and elasticity needs. ULTEM resins uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom.
BASFs Ultramid grades are molding compounds on the basis of PA6, PA66 and various co-polyamides such as PA66/6. The range also includes PA610 and semi-aromatic polyamides such as PA6T/6.
The molding compounds are available unreinforced, reinforced with glass fibers or minerals and also reinforced with long-glass fibers for special applications. Ultramid is noted for its high mechanical strength, stiffness and thermal stability. In
addition, Ultramid offers good toughness at low temperatures, favorable sliding friction behavior and can be processed without any problems.
Because of the manifold and tailor-made characteristics of Ultramid many applications are possible, especially in automotive construction, electrical engineering and electronics, in household technology, industrial connection, photovoltaics, in construction and installation, furniture, the sanitary industry and in mechanical engineering.
Ultramid can be processed by all methods known for thermoplastics. The main methods are injection molding and extrusion. Complex moldings are economically manufactured in large numbers from Ultramid by injection molding. The extrusion method is used to produce films, semi-finished products, pipes, profiled parts, sheet and monofilaments. Semi-finished products are usually further processed by cutting tools to form finished molded parts.
Ultradur is BASFs brand name for its line of partially crystalline, thermoplastic, saturated polyesters derived from
polybutylene terephthalate (PBT). They are employed as materials for high-quality technical components in many industry sectors.
Ultradur shows its strengths wherever high-quality and above all heavy-duty parts are required â?? for example in the automotive industry, in the electrics and electronic sectors. The range of applications which benefit from these properties of Ultradur in both industry and everyday life is vast. A feature that is particularly important is the low water absorption and thus the fact that the mechanical and electrical properties are largely independent of the moisture content or the climatic surrounding conditions. Particularly for components that are safety-relevant and have to work reliably for the entire lifetime of a component,Ultradur is indispensable.
Ultrason pellets are supplied in bags and/or octabins. The bulk density ranges between 700 and 800 g/l. Provided the packaging remains undamaged, Ultrason can be stored indefinitely. Ultrason pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least 4h at 130 C to 150 C in a vacuum or dry air drier prior to processing.
BASF PES/PESU Ultrason E 2010 HC Resins
Package:
25 kgs/bag
CYCOLOY CX7240 resin is an injection moldable PC/ABS blend. It contains non-brominated and non-chlorinated flame retardant systems to meet UL-94 V0 at0.75mm, V1 at 0.6mm, V2 at 0.2mm and 5VB at 1.5mm respectively. Excellent flow and impact balance together with the thin wall flame resistance and all coloroptions make CYCOLOY CX7240 an ideal candidate for a wide variety of thin wall applications.
he XENOY alloy is a blend of semi-crystalline polyester (typically polybutylene terephthalate, PBT, or polyethylene
terephthalate, PET) and polycarbonate (PC). The XENOY resin family offers good chemical resistance, great impact resistance even at low temperatures, heat resistance, and outstanding aesthetic and flow characteristics.
POLYFLON PTFE is composed of polytetrafuluoroethylene, the most commonly used fluoroploymer. PTFE has a very long chain molecular structure in which all of the hydrogen atoms of polyethylene are replaced by fluorine atoms.
PTFE is superior in heat resistance and chemical resistance compared with the other plastics. These properties result from stable chemical structure consisting of only carbon and fluorine atoms with the highest electro negativity.
NEOFLON FEP NP-Series
NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.
NEOFLON ETFE EP-506 is a resin for extrusion of thin coatingsof small wire sizessuch as aerospace wire, automotive wire, appliance wire, thin film and tubing, etc.. Itmay be used for injection molding of thin wall parts.
Ethylene tetrafluoroethylene copolymer is a kind of chemical substance. ETFE is the strongest and toughest fluoroplastic. It not only maintains the good heat resistance, chemical resistance and electrical insulation properties of PTFE, but also greatly improves the radiation resistance and mechanical properties. The tensile strength can reach 50MPa, which is nearly twice that of polytetrafluoroethylene.
Zytel PA
Zytel PA is a cost-effective, high-performance polyamide nylon suitable for a wide range of applications.
Zytel PA polyamide nylon is specified for a variety of uses, from car parts to protecting sensitive electronic components. Itâ??s performance-tested for strength, heat resistance, and durability.
The versatility of Zytel PA polyamide nylon has been demonstrated by its selection for thousands of applications. DuPont material science resources draw on their real-world knowledge and experience to collaborate in helping customers on new applications.
Properties of Zytel PA include:
* Excellent insulating/electrical resistance
* Tested heat, humidity and chemical resistance
* Strength and stiffness for metal replacement
* Dimensional stability
* Easy to process, good moldability
Zytel 70G25HSLR is a heat-stabilized, hydrolysis resistant, 25% glass fiber reinforced polyamide66 grade. Exhibits high
mechanical strength, excellent balance of stiffness & toughness, good high-temperature performance, good electrical as well as flammability properties
13907 Plastic Raw Materials Suppliers
Short on time? Let Plastic Raw Materials sellers contact you.
