Solvay Ectfe Halar 6014/ 6014F/ 6012F

Halar ECTFE Solvay Halar 6014 Solvay Halar 6014 F Solvay Halar 6012 F Halar ECTFE, a copolymer of ethylene and chlorotrifluoroethylene, is a semi-crystalline melt processable partially fluorinated polymer. It is available in different grades that are specifically designed for electrostatic powder coating. Halar ECTFE is particularly suitable for use as a coating material in protection and anti-corrosion applications thanks to its unique combination of properties. Key features Very good chemical and thermal resistance Optimum permeation resistance Outstanding flame resistance Very good surface characteristics Surface smoothness Purity Markets and Applications Typical applications served by Halar ECTFE include those in contact with highly corrosive or ultrapure chemicals such as strong inorganic bases and strong mineral and oxidizing acids including: Vessels Reactors Semiconductor chemical storage tanks and ductwork Piping systems Centrifuges Agitators Exhaust hoods Filters Electroplating equipment Grades: SOLVAY ECTFE Halar 1400LC SOLVAY ECTFE Halar 350LC SOLVAY ECTFE Halar 500LC SOLVAY ECTFE Halar 513LC SOLVAY ECTFE Halar 930LC SOLVAY ECTFE Halar 5001C SOLVAY ECTFE Halar 930LCW SOLVAY ECTFE Halar 700HC SOLVAY ECTFE Halar 2408DA SOLVAY ECTFE Halar 2508DA SOLVAY ECTFE Halar 300DA SOLVAY ECTFE Halar 558 SOLVAY ECTFE Halar 6012F SOLVAY ECTFE Halar 6014/6014F SOLVAY ECTFE Halar 6514 SOLVAY ECTFE Halar 6614 SOLVAY ECTFE Halar 6914 SOLVAY ECTFE Halar 7114 SOLVAY ECTFE Halar 901 SOLVAY ECTFE Halar 902 SOLVAY ECTFE Halar XPH-940 Packing spec: 25kgs per drum. We can give discount according to order quantity.

SOLVAY Veradel PES/PESU Series: Veradel PESU was formerly marketed as Gafone PESU Veradel 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity. PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance. Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives. PES/PESU SOLVAY Veradel 3000P PES/PESU SOLVAY Veradel 3100P PES/PESU SOLVAY Veradel 3200P PES/PESU SOLVAY Veradel 3400P PES/PESU SOLVAY Veradel 3600P VeradelPESU (polyethersulfone) combines good chemical resistance with a high heat deflection temperature, making it a good fit for baby bottles and other food service applications. This resin is also inherently flame retardant for use in electronic components and testing devices Key features Heat deflection temperature of 204 C (399 F) Good chemical resistance Excellent electrical properties Transparent Typical applications Automotive lighting Electrical and electronic components Baby bottles Coatings Cookware Food service Low-pressure water filtration membranes Food and beverage processing membranes Industrial filtration membranes We can give discount according to order quantity.

Supplier: PTFE FEP PFA PEEK PVDF ETFE ECTFE lining coating
Services: Lining coating of all product
Buyer: PTFE FEP PFA PEEK PVDF ETFE ECTFE lining coating

Radel PPSU High heat, high impact performance Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI). The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization. Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions. Key Features High HDT of 207C (405F) Superior toughness and impact strength Exceptional long-term hydrolytic stability Better chemical resistance than PSU and PEI Withstands over 1,000 cycles of steam sterilization without any significant loss of propertiesInherently flame retardant Transparent Colorable Typical Applications Sterilization cases and trays Dental and surgical instruments Medical devices Aircraft interiors Airline catering trolleys Hot water fittings Plumbing manifolds Food service trays SOLVAY PPSU Radel R-5100 NT Natural color SOLVAY PPSU Radel R-5100 NT15 Bone color SOLVAY PPSU Radel R-5100 BK937 Black color SOLVAY PPSU Radel R-5100 GY1137 Grey color SOLVAY PPSU Radel R-5100 GY1037 Grey color SOLVAY PPSU Radel R-5100 GY874 Grey color SOLVAY PPSU Radel R-5100 RD1018 Red color SOLVAY PPSU Radel R-5100 YL1337 Yellow color SOLVAY PPSU Radel R-5100 GN1007 Green color SOLVAY PPSU Radel R-5100 BU1027 Blue color SOLVAY PPSU Radel R-5100 VT2582 Violet color SOLVAY PPSU Radel R-5100 BN1164 Brown color SOLVAY PPSU Radel R-5100 OR1145 Orange color Packing spec.: 25kgs/ bag We can give discount according to order quantity

KetaSpire KT-850 polyetheretherketone KetaSpire KT-850 is the intermediate-flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-color pellet form. KetaSpire PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity and excellent chemical resistance to organics, acids and bases. These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. Solvays KetaSpire PEEK product line includes: Neat grades (lubricated and non-lubricated) Glass fiber and carbon fiber reinforced grades (low and high melt flow) Wear resistant SL grades (lubricated and non-lubricated) Natural-colored powders (coarse, fine, super-fine and ultra-fine)

KetaSpire PEEK KetaSpire PEEK (polyetheretherketone) offers the best combination of fatigue resistance and chemical resistance, which is similar to PPS (polyphenylene sulfide). However, PEEK can operate at higher temperatures and retains its excellent mechanical properties at continuous-use temperatures up to 240 C (464 F), allowing it to replace metal in severe end-use environments. Glass fiber-reinforced and carbon fiber-reinforced grades provide a wide range of performance options. KetaSpire Product Line Solvays KetaSpire PEEK product line includes: Neat grades (lubricated and non-lubricated) Glass fiber and carbon fiber reinforced grades (low and high melt flow) Wear resistant SL grades (lubricated and non-lubricated) Natural-colored powders (coarse, fine, super-fine and ultra-fine) Solvay KetaSpire KT-820 NT Natural pellets Solvay KetaSpire KT-820 NL Natural pellets Solvay KetaSpire KT-820 BK95 Black pellets Packing:25kg/carton We can give discount according to order quantity.

Radel PPSU High heat, high impact performance Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI). The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization. Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions. Key Features High HDT of 207C (405F) Superior toughness and impact strength Exceptional long-term hydrolytic stability Better chemical resistance than PSU and PEI Withstands over 1,000 cycles of steam sterilization without any significant loss of properties Inherently flame retardant Transparent Colorable Typical Applications Sterilization cases and trays Dental and surgical instruments Medical devices Aircraft interiors Airline catering trolleys Hot water fittings Plumbing manifolds Food service trays SOLVAY PPSU Radel R-5500 NT Natural color SOLVAY PPSU Radel R-5500 NT15 Bone color SOLVAY PPSU Radel R-5500 BK937 Black color SOLVAY PPSU Radel R-5500 GY1137 Grey color SOLVAY PPSU Radel R-5500 GY1037 Grey color SOLVAY PPSU Radel R-5500 GY874 Grey color SOLVAY PPSU Radel R-5500 RD1018 Red color SOLVAY PPSU Radel R-5500 YL1337 Yellow color SOLVAY PPSU Radel R-5500 GN1007 Green color SOLVAY PPSU Radel R-5500 BU1027 Blue color SOLVAY PPSU Radel R-5500 VT2582 Violet color SOLVAY PPSU Radel R-5500 BN1164 Brown color SOLVAY PPSU Radel R-5500 OR1145 Orange color Packing spec.: 25kgs/ bag We can give discount according to order quantity.

Ixef PARA Ixef PARA (polyarylamide) provides a unique combination of strength and aesthetics, making it ideal for complex parts that require both overall strength and a smooth, beautiful surface. Ixef compounds typically contain 50-60% glass fiber reinforcement, giving them remarkable strength and rigidity. What makes them unique is that even with high glass loadings, the smooth, resin-rich surface delivers a high-gloss, glass-free finish that's ideal for painting, metallization or producing a naturally reflective shell. High flow into thin walls In addition, Ixef PARA is an extremely high-flow resin so it can readily fill walls as thin as 0.5 mm, even with glass loadings as high as 60%. Excellent Surface Finish Superb, resin-rich surface provides a highly polished appearance, even with high glass fiber content. Solvay IXEF 1002 Natural/Black color resins Packing:25 kgs a bag

Solef PVDF High-performance semi-crystalline fluoropolymers Solef PVDF is a fluorinated semi-crystalline thermoplastic which is obtained by polymerizing vinylidene fluoride. Without any additives, it has the intrinsic stability inherent to fluoropolymers even when exposed to harsh environments, providing the user with a unique combination of properties resulting in longer equipment life. In addition to the PVDF homopolymers, which are recognized worldwide for their excellent performance in a variety of applications, Solvay Specialty Polymers has developed a wide range of VF2-HFP copolymers, and VF2-CTFE copolymers to respond to specific needs of the market. Key Features Chemical inertness to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, alcohols, etc. Very high purity Low coefficient of friction Continuous use within a wide range of temperatures Unaffection by UV and good resistance to �³ radiation Excellent intrinsic fire resistance Available grades approved for food contact applications Good capability for thermoforming and very easily joined by welding Performance Relative Performance of Melt-Processable Fluoropolymers In addition to Solef PVDF resins, Solvay Specialty Polymers offers a wide range of fluoropolymers which are also easily processable by injection, extrusion and all conventional processing techniques.