Polyethylene Terephthalate (PET) Polymer Intrinsic Viscosity: 0.76 ± 0.02 dl/g Test Method: IVLDPIPL-3206 (AVS) Acetaldehyde Content: Maximum: 1 ppm Test Method: IVLDPIPL-3212 (HS GC) Melting Point:247 ± 2.0C Test Method: IVLDPIPL-3211 (DSC) Color (b Value): Range: -3.5 to -1.2 Test Method: IVLDPIPL-3221 (Colorimeter, CIE Lab) Crystallinity: Minimum: 50% Test Method: IVLDPIPL-3216 (DGC) Moisture (When Packed): Maximum: 0.20 wt% Test Method: IVLDPIPL-3219 (Coulometric) Chips per Gram: 65 ± 5 pieces Test Method: IVLDPIPL-3220 (Gravimetric)
Raw Materials: PTA (Purified Terephthalic Acid) MEG (Monoethylene Glycol) Grade: Bright Form: White Granules Product Description: Alkali-soluble Polyester Chips are a type of modified polyester created by incorporating hydrophilic groups into conventional polyester structures. This modification allows for improved solubility in alkaline solutions. These chips are used in the production of ultra-fine sea-island POY (Partially Oriented Yarn) and FDY (Fully Drawn Yarn), as well as sea-island staple fibers. The material is ideal for applications requiring high-performance fibers and fabrics with unique textural qualities.
Category PET Chips Tags polyester chips, semi-dull, textile grade Raw materials PTA + MEG Grade Bright/Semi-dull Form Slightly yellow/white granules Cationic Polyester Chips for BCF Yarn, mainly used for the development of cellulose-like fibers, with special post-spinning false twist processing, it can develop viscose and cotton-like fibers; It can also be used to some extent as a substitute for nylon 6 fibers.
Category: PET Chips Raw Materials: PTA (Purified Terephthalic Acid) EG (Ethylene Glycol) BaSOâ?? (Barium Sulfate) Powder Grade:Opaque White Form:Granule Barium Sulfate Polyester Chips are a masterbatch product formed by incorporating barium sulfate powder into a polyester masterbatch. These chips are widely used in the production of PET films and are commonly employed during the blending stage of spinning processes. The addition of barium sulfate enhances opacity, making the chips ideal for applications where an opaque white finish is required.
Film Grade Silica Polyester Chips Category: PET Chips Raw Materials: PTA (Purified Terephthalic Acid) EG (Ethylene Glycol) Silica Grade: Film Grade Form: Dull MATT (Silica) PET Chips are specifically designed to enhance the performance of release films and serve as a filler or additive for matte films. These chips are produced by blending silica nanoparticles with polyester resins during the manufacturing process. The inclusion of silica improves the overall properties and functionalities of the polyester chips, making them highly suited for applications where a matte finish or enhanced release characteristics are desired.
Low Melting PET Chip is a specialized form of polyethylene terephthalate (PET) that features a lower melting point compared to standard PET chips. This property enables easier processing and expands its potential applications across various industries. It is particularly well-suited for Hot Melt Yarn Masterbatch production and serves as an extrusion-grade polymer for hot-melt adhesive and glue coating processes. Key Features: Lower Melting Point: The chip exhibits a melting temperature range of 90C to 160C, allowing for faster, more energy-efficient processing during molding or extrusion. Excellent Compatibility: It can be blended or co-extruded with other PET grades, making it versatile in a variety of manufacturing processes. Cost Efficiency: The lower energy consumption and reduced processing time lead to significant cost savings.
PET Chip for Spunbond Non-Woven Fabric Semi-dull Grade Specialty Polymer for Nonwovens Product Description: Our non-woven fabric polyester chip is a high-viscosity PET material designed specifically for the production of spunbond nonwoven fabrics. Unlike traditional textile production processes, nonwovens are created directly from fiber or polymer without the need for yarn spinning. PET chips are an essential raw material in this process. This newly developed polymer is widely used in various industries, including medical treatment, home decoration, filtration materials, and insulating materials. The high-viscosity PET chips offer enhanced device performance and flexible polyester capacity, significantly improving the quality of non-woven products. Key Features: High Intrinsic Viscosity (IV): The intrinsic viscosity of regular polyester chips typically ranges between 0.64-0.68 dl/g. Our high-viscosity chips reach an IV of 0.71 dl/g, offering improved durability and product performance. Stable Carboxyl Terminal Value and Melting Point: Ensures consistency and quality during the manufacturing process. Enhanced Non-woven Product Quality: The high-viscosity nature of the chips improves the overall strength and reliability of the final non-woven fabric. SPECIFICATIONS: Intrinsic Viscosity: 0.711 dl/g Colour Value: L: 83.2 b: 5.9 COOH Content: 25.8 mol/t DEG Content: 1.14% Melting Point: 261.0C Water Content: 0.05% Ash Content: 0.03% Irregular Chip Content: 0% Powder Content: 0% TiOâ?? Content: 0.29% Weight (g/100 chips): 2.918 g Remarks: IV Testing Method: The solvent used is a 1:1 mixture of phenol and tetrachlorethane, tested at a temperature of 25C. Testing Standard: Complies with GB/T 14190-2017.
Dimensional stability, low warpage, weatherable, excellent chemical resistance and high quality surface finish & gloss. Range: PBT NATURAL PBT BLACK PBT GLASSFILLED
Exporter of Polycarbonate Granules, PC Granules, Polycarbonate Natural Granules, Polycarbonate Black Granules and our setup is situated in Pune, Maharashtra, India. Polycarbonate, an amorphous polymer, offers a unique combination of toughness with exceptional impact strength. It also exhibits high optical clarity, excellent creep, and high temperature resistance. Range: Polycarbonate Natural Polycarbonate Black PC / ABS
Exporter of Polyoxymethylene Granules, POM Plastic Granules and our setup is situated in Pune, Maharashtra, India. POM is a material of an excellent quality with features of excellent anti-friction/anti-wear, chemical-resistance, heat-resisting stability, precise dimensions and moulding abilities. It is mainly applied in gear or roller, and is used for various purposes over the fields of cars, office equipment and living materials. Range: POM COPOLYMER POM HOMOPOLYMER
Exporter of Polypropylene Granules, PP Granules, PPCP Black, Yellow, Blue,Green Granules, PP Talc Filled Granules, PP Glass Filled Granules, PPCP Reprocessed Black and our setup is situated in Pune, Maharashtra, India. Complete range of Homo, Random & Impact Polypropylene and Polypropylene Compounds for Flexible and Rigid Applications. Range: PPCP BLACK PPCP YELLOW, RED, BLUE, GREY, GREEN PP BLACK PP TALC FILLED PP GLASS FILLED
Nylon is the plastic material based on polyamide-6 that is a thermoplastic resin with excellent mechanical, thermal and electrical properties. Nylon is widely used in the manufacture of automobile and industrial parts. Range: NYLON 6 UNFILLED NYLON 6 GLASSFILLED NYLON 66 UNFILLED NYLON 66 GLASSFILLES
Super transparent, amorphous PMMA offers high resistance to UV light and weathering, chemical and heat resistance, long service life, and unlimited colouring options for various applications. Range: PMMA NATURAL PMMA RED
Product Introduction: Polystyrene (PS), abbreviated as PS, refers to a polymer synthesized by free radical addition reaction of styrene monomer, with the chemical formula (C8H8) n. It is a colorless and transparent thermoplastic with a glass transition temperature higher than 100, so it is often used to make various disposable containers that need to withstand the temperature of boiling water, as well as disposable foam lunch boxes. Product name Polystyrene Appearance Colorless and transparent thermoplastic Foreign name Polystyrene Flash point 156.3 Chemical formula C8H8n Melting point 212 Boiling point 293.4 Density 1.05g/cm Classification Ordinary polystyrene/expanded polystyrene, etc Product application: Due to its transparency, excellent rigidity, electrical and printing properties, especially its good hygiene and low cost, polystyrene has broad application prospects in food packaging. It has been widely used in various instrument casings, lampshades, optical parts, instrument parts, transparent window mirrors, transparent models, chemical acid storage tanks, acid conveying tanks, telecommunications parts, high-frequency capacitors, high-frequency insulation pads, brackets, inserts, and frozen insulation materials in the electromechanical industry, instrument and communication equipment industry, etc. It is also widely used in various daily necessities, such as bottle caps, containers, decorations, buttons, combs, toothbrushes, soap boxes, boxes, and toys.
Product Introduction: ABS plastic is a ternary copolymer of three monomers: acrylonitrile (A), butadiene (B), and styrene (S). The relative content of these three monomers can be changed arbitrarily to produce various resins. ABS plastic has the common properties of three components: A makes it resistant to chemical corrosion, heat, and has a certain surface hardness, B makes it highly elastic and tough, and S makes it have the processing and forming characteristics of thermoplastic plastics and improves electrical properties. Therefore, ABS plastic is a "tough, hard, and rigid" material that is easy to obtain, has good comprehensive performance, is cheap, and has a wide range of uses. Product Name Acrylonitrile Butadiene Styrene plastic Chemical name Acrylonitrile butadiene styrene plastic Applicable scope Machinery, automobiles, electronics, etc Product features Impact resistance, heat resistance, low temperature resistance, etc CASL ogin number 9003-56-9 EINECSLogin number 618-371-8 Monomer Acrylonitrile; Butadiene; styrene Product application: ABS plastic has been widely used in manufacturing industries such as machinery, electrical, textiles, automobiles, airplanes, ships, and chemical industries.
Product Introduction: Acrylonitrile styrene copolymer, abbreviated as AS, is a thermoplastic resin formed by copolymerization of acrylonitrile and styrene. It has good chemical resistance, heat resistance, dimensional stability, and mechanical strength, and is widely used in fields such as electronics, automobiles, construction, and healthcare. Product Application And Storage: Used for manufacturing oil resistant mechanical parts, instrument casings, instrument panels, battery boxes, tractor fuel tanks, battery casings, packaging containers, daily necessities, etc., and capable of drawing single filaments If used and stored according to regulations, it will not decompose. Sealed in a cool and dry environment
Product Introduction: Polyamide, commonly known as nylon, is a general term for polymers containing amide groups in the repeating units of the main chain of macromolecules. Polyamide can be obtained by ring opening polymerization of internal acid amines, or by condensation polymerization of diamines and dicarboxylic acids. Polyamide (PA) refers to a polymer with a polar amide group (- CO-NH-1) in its main chain segment. Product features: 1. Excellent mechanical properties. Nylon has high mechanical strength and good toughness. 2. Good self lubrication and friction resistance. Nylon has good self lubrication and low friction coefficient, making it a long service life as a transmission component. 3. Excellent heat resistance. High crystalline nylon such as nylon 46 has a high thermal deformation temperature and can be used for a long time at 150. After being reinforced with glass fiber, the thermal deformation temperature of PA66 reaches above 250 4. Excellent electrical insulation performance. Nylon has a high volume resistance and high breakdown voltage resistance, making it an excellent electrical and electrical insulation material. 5. Excellent weather resistance. 6. Water absorption. Nylon has a high water absorption capacity, with saturated water reaching over 3%. To a certain extent, it affects the dimensional stability of the workpiece. Product Usage: Used as a room temperature curing agent for epoxy resin. Used as a curing agent and toughening agent for epoxy resin, and as a cable sealing material. Mainly used in the production of adhesives, coatings, sealing gaskets, etc
Product Introduction: Polypropylene, referred to as PP, is a colorless, odorless, non-toxic, translucent solid substance. Polypropylene is a kind of thermoplastic syntheticl resin with excellent performance. It is a colorless translucent thermoplastic lightweight universal plastic. With chemical resistance, heat resistance,l electrical insulation, high strength mechanical properties and good high wear-resisting processing properties. Product application: polypropylene has been widely developed and applied in many fields such as machinery, automobile, electronics and electrical appliances, construction, textile, packaging, agriculture, forestry, fishery and food industry since it came out. Product features: Grade molding, extrusion grade, blow molding grade, injection molding grade, Sheet extrusion Feature High flow, standard grade, High Strength, high temperature resistance, low temperature resistance, hydrolysis resistance, High Rigidity, Flame retardant grade, Chemical Resistance, High impact resistance FAQ Q1 Are you trading company or Manufacturer ? A We are factory Q2 About Sample A Under 500g we provide free of charge Q3 About Material A We can customize the material according to customers' requirement Q4 About Quality A All the products must be tested strictly according to the testing procedure before shipment.
Product Introduction: Plastic particles refer to granular plastics, which are raw materials stored, transported, and processed in the form of semi-finished products. It is generally divided into more than 200 types and subdivided into several thousand types. Common plastic particles include general-purpose plastics, engineering plastics, and specialty plastics. Common plastics include polypropylene, polyethylene, polyvinyl chloride, polystyrene, polyester, polyurethane, etc. Engineering plastics include nylon, polytetrafluoro, polyoxymethylene, and polycarbonate organosilicon. Special plastics include thermosetting plastics and functional polymer plastics, such as artificial kidneys. Product application: Plastic grains have a wide range of applications. In daily life, Plastic grains can be used to manufacture various plastic bags, buckets, pots, toys, furniture, stationery, and other household utensils, as well as various plastic products. In the clothing industry, it can be used to manufacture clothing, ties, buttons, and zippers. In terms of building materials, Plastic grains produce various building components, plastic doors and windows, etc. using plastic wood profiles as derivatives. In the chemical industry, it can be used to make reaction vessels, pipelines, containers, pumps, valves, etc., and is applied in chemical production sites to solve corrosion and wear. In agriculture, it can be used to make agricultural films, pumping pipes, agricultural machinery, fertilizer packaging bags, and cement packaging bags. It is also widely used in the electrical and telecommunications industries. FAQ Q1 How could I get a sample? A Before we received the first order, please afford the sample cost and express fee. We will return the sample cost back to you within your first order. Q2 Whether you could make your products by our requirement? A Yes, The performance of products can be customized if you can meet our MOQ. Q3 How to guarantee the quality of your products? a. Strict detection during production. b.Strict sampling inspection on products before shipment and intact product packaging ensured.
Product Introduction: GPPS plastic is a general-purpose polystyrene plastic. Polystyrene (PS) refers to a polymer synthesized by free radical polymerization of styrene monomers. Polystyrene mainly includes four types: ordinary polystyrene (GPPS), high impact polystyrene (HIPS), expanded polystyrene (EPS), and syndiotactic polystyrene (SPS). Essential information: Product Name GPPS Characteristic Glossy and transparent Category Polymer Manufacturing method Forming processing Security Product application: GPPS plastic is mainly used to manufacture transparent food boxes, fruit plates, small tableware, etc. It can also be made into shrink film for shrink packaging of food. Product Features: GPPS is a glossy and transparent particle. Lightweight, affordable, low water absorption, good coloring properties, dimensional stability, good electrical performance, transparent products, and easy processing. GPPS is soluble in aromatic hydrocarbons, chlorinated hydrocarbons, aliphatic ketones, and esters, but can only swell in acetone. Can withstand the action of certain mineral oils, organic acids, bases, salts, lower alcohols, and their aqueous solutions. Low water absorption rate, able to maintain its mechanical properties and dimensional stability in humid environments. Excellent electrical performance, high volume resistance and surface resistance, and not affected by temperature, humidity changes, or corona discharge. The radiation resistance is also very good. The main disadvantages of GPPS are its brittleness, low impact strength, poor heat resistance, inability to withstand boiling water, and can only be used at lower temperatures and loads. Poor resistance to sunlight and flammable. When burning, it turns black and has a special odor.
