Application DM PMMA features 1) Has the perfect color similar to teeth 2) Excellent biocompatibility 3) Made through high temperature high pressure 4) Good wearability
Product description Polyva YT-8012 is a copolymer powder of vinyl acetate and ethylene which is easy dispersible in water and has good saponification resistance. and it also has a wide range of usage. Suggest Applications Suitability Flexible thin-bed mortars Tile grouts/joint fillers Tile adhesive(C1/C1S1/C2) Skim Coat/ Wall putty(Indoor/outdoor) Plasters/ Renders Troweling compounds for Floor/wall Gypsum based mortars Powder paint Self-leveling dry mixed mortars Highly recommended Recommended Suitable Properties Ready-mixed mortars modified with POLYVAE® YT-8012 can improved adhesion, flexural strength in bending,abrasion resistance,deformability.it has good rheology and water retention.can increase the sag resistance of tile adhesives,it can made up to tile adhesives with excellent non-slump properties and putty with good properties. Special features POLYVAE®YT-8012 has no effect on rheological preperties and is a low-emissions, general-purpose powder in the medium Tg range. It is eminently suitable for formulating compounds of high ultimate strength. Application Typical applications for POLYVAE®YT-8012 : not only for blending with inorganic binders, such as cement, gypsum, plaster and hydrated lime for the manufacture of thin bed mortars, self-leveling mortars, wall troweling compounds, tile adhesive and joint filler, but also as the exclusive binder for synthetic-resin-bound systems. Storage POLYVAE YT-8012 should be stored in a cool and dry place and protected against moisture. Since the product is thermoplastic. the storage temperature not over 30 Deg.C. It should not be subjected to pressure of high temperatures during storage because of the risk of caking. Storage time should not exceed 6 months from receipt of delivery. If you cant use out one bag on time, youd better seal it again. Package In 25kg Paper compound plastic bags. Packing on request Additional Information: Appearance White powder Stabilizing system Polyvinyl alcohol Additive agent Mineral Anti-block agent Product Technical Data Item Unit Value Solids content % 98.0-100.0 Ash content (1000) % 10-14 Bulk density g/l 480-590 Average particle size �¼m ~80 PH value 5.0-8.0 MFFT() approx 4 Tg () approx +10 Safety notes The above date is in accordance with our knowledge,but do not absolve the clients carefully checking it all immediately on receipt.please do more testing before using it To avoid the difference formulation and different raw materials. and we reserve the right to alter our product and without informing in advance.
variation in colors [red, blue, pink, purple, black, yellow, and so on]
PC/ABS repro pellets Color black PULSE 2000EZ MFI 25 IZOD 10
ZHUOJUN redispersible polymer powders are produced by spray-drying special water-based emulsion and are mostly based on vinyl acetate-ethylene. They dissolve in water easily and quickly forms emulsion. Their chemical properties are the same as original emulsion completely. They have excellent flexibility in low temperature. The RDP powders can glue together different substrates, reinforce mortar structure and provide excellent adhesion at cement or gypsum based dry mixed mortar substrate interface.
ZHUOJUN® redispersible polymer powders are free flowing white powders obtained by spray drying macromolecular copolymer dispersions under carefully defined conditions. They are mainly used improve cohesion, adhesion, flexibility and workability in constructions especially in dry-mix mortar. Typical Applications - Tile adhesives - Tile grout - Wall putty - External insulation and finish systems (EIFS) - Cement, lime or gypsum-based finished dry-mix mortar - Self-leveling flooring compounds - Repair mortars and crack fillers - Cement-based plasters - Gypsum fillers
The PMMA BLANK is developed to be used in milling machines for making temporary restorations, for gingiva formation after placing dental implants and for accurate determination of the occlusal contacts before placing zirconium prosthetic structures. Available in various shade or colour and thickness.
Dear Ladies and Gentlemen, i would like you to offer following Material: Regranulate TPU ESTER Shore A90-A95 Ex. Fleece Material Colour: Natural Packing: BigBag Quantity: 20 Metric Tons ( Regularly ) Price: 1,30 USD/KG Material is clean and without any contaminations. If you have any questions, do not hesitate to contact me.
The super-softening property of Redispersible Polymer Powder (RDP) can improve the flexibility of cement-based materials while guarantees other work performances. In this study, the influences of different mixing amounts of RDP on the compressive strength, flexural strength, flexural compression ratio and bonding strength of sulphoaluminate cement mortar were investigated. The microscopic morphological structure of RDP-modified sulphoaluminate cement mortar was also observed through SEM to analyse the influence mechanism. Results show that, with the mixing amount of 2.0%, the compressive strength of cement mortar was improved. This mixing amount also increased the 28d flexural strength to 8.21 MPa (5.0% improvement) and 14d bonding strength to 5.6 MPa (27.3% improvement). Addition of more RDP resulted in the increase in flexural compression ratio because the powder particles formed water-insoluble continuous polymer colloidal film in hardened paste. This film generated a network with cement dydration products throughout the paste, consequently promoting the flexibility of cement.
Recycled White HDPE Plastic Granules from our factory in Thailand HDPE blow molding grade can be used for producing small sized containers such as bottles, tanks, barrels. It can also used in the production of intermediate bulk-containers, large toy, floating matters and medium to large sized containers. specification : Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 0.37g/10min Density ASTM D792 = 0.965 g/ cm3 Melting Point by DSC ASTM D3418 = 134.8 C Tensile strength @Yield ASTM D 638 = 23.25 MPa %Elongation @ break ASTM D 638 = 636.81% Flexural modulus ASTM D 790 = 556.82 MPa Flexural Strength ASTM D 790 =21.84 MPa Notched Izod Impact Strength ASTM D256 = 216.89 J/M Packing detail 25 kg/bag 800 bags(20MT)/20' container , 1080 bags(27MT)/40' container FAQ Q: Are you the manufacturer or trading company A: We are both of the manufacturer and trading company. We have factory at Samut Sakorn and our office at Phra Pradaeng, Samut Prakan in Thailand. Q: Can you provide free samples A: Sample is free, Buyer in charge of shipping cost. Q: How long is your delivery date A: In general within 15 day after your prepayment, It according to quantity. Q: What is your term of payment A: 30% T/T in advance, Then 70% T/T or L/C balance before shipment.
Recycled Transparent HDPE Plastic Granules from our factory in Thailand. HDPE blow molding grade can be used for producing small sized containers such as bottles, tanks, barrels. It can also used in the production of intermediate bulk-containers, large toy, floating matters and medium to large sized containers. Packing Detail 25 kg / bag 800 bags(20MT)/20' container , 1080 bags(27MT)/40' container specification Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 0.34g/10min Density ASTM D792 = 0.949 g/ cm3 Melting Point by DSC ASTM D3418 = 135.9 C Tensile strength @Yield ASTM D 638 = 23.50 MPa %Elongation @ break ASTM D 638 = 693.70% Flexural modulus ASTM D 790 = 559.74 MPa Flexural Strength ASTM D 790 =21.76 MPa Notched Izod Impact Strength ASTM D256 = 234.85 J/M FAQ : Are you the manufacturer or trading company? A: We are both of the manufacturer and trading company. We have factory at Samut Sakorn and our office at Phra Pradaeng, Samut Prakan in Thailand. Q: Can you provide free samples? A: Sample is free, Buyer in charge of shipping cost. Q: How long is your delivery date? A: In general within 15 day after your prepayment, It according to quantity. Q: What is your term of payment? A: 30% T/T in advance, Then 70% T/T or L/C balance before shipment.
Recycled TRANSPARENT PP Plastic Granules PP Injection and Film grade can be used for producing Blown film work such as Clothes bag. It can also used in the production of Household appliances, plastic containers, small box, toys, Office equipment, Electrical parts. specification Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 10.52g/10min Density ASTM D792 = 0.918 g/ cm3 Melting Point by DSC ASTM D3418 = 162.7 C Tensile strength @Yield ASTM D 638 = 30.89 MPa %Elongation @ break ASTM D 638 = 311.04% Flexural modulus ASTM D 790 = 994.75 MPa Flexural Strength ASTM D 790 =38.66 MPa Notched Izod Impact Strength ASTM D256 = 39.23 J/M FAQ Q: Are you the manufacturer or trading company A: We are both of the manufacturer and trading company. We have factory at Samut Sakorn and our office at Phra Pradaeng, Samut Prakan in Thailand. Q: Can you provide free samples A: Sample is free, Buyer in charge of shipping cost. Q: How long is your delivery date A: In general within 15 day after your prepayment, It according to quantity. Q: What is your term of payment A: 30% T/T in advance, Then 70% T/T or L/C balance before shipment. Packing Detail 25Kg/bag 800 bags(20MT)/20' container , 1080 bags(27MT)/40' container
Recycled White PP Plastic Granules from our factory PP Injection and grade can be used for producing Blown film work such as Clothes bag. It can also used in the production of Household appliances, plastic containers, Office equipment, Electrical parts, Large plastic bucket, Parts in the washing machine, Car parts and Refrigerator. specification Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 28.61g/10min Density ASTM D792 = 0.921 g/ cm3 Melting Point by DSC ASTM D3418 = 129.5 ,165.5 C Tensile strength @Yield ASTM D 638 = 23.47 MPa %Elongation @ break ASTM D 638 =17.33% Flexural modulus ASTM D 790 = 928.28 MPa Flexural Strength ASTM D 790 =32.74 MPa Notched Izod Impact Strength ASTM D256 = 70.84 J/M Packing Detail 25Kg/bag 800 bags(20MT)/20' container , 1080 bags(27MT)/40' container
Recycled Black PP Plastic Granules from our factory PP Injection and Film grade can be used for producing Blown film work such as Clothes bag. It can also used in the production of Household appliances, plastic containers, small box, toys, Office equipment, Electrical parts. specification Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 11.25g/10min Density ASTM D792 = 0.936 g/ cm3 Melting Point by DSC ASTM D3418 = 131.6 , 161.3 C Tensile strength @Yield ASTM D 638 = 20.99 MPa %Elongation @ break ASTM D 638 = 420.39% Flexural modulus ASTM D 790 = 781.38 MPa Flexural Strength ASTM D 790 =28.92 MPa Notched Izod Impact Strength ASTM D256 = 30.68 J/M FAQ Q: Are you the manufacturer or trading company? A: We are both of the manufacturer and trading company. We have factory at Samut Sakorn and our office at Phra Pradaeng, Samut Prakan in Thailand. Q: Can you provide free samples? A: Sample is free, Buyer in charge of shipping cost. Q: How long is your delivery date? A: In general within 15 day after your prepayment, It according to quantity. Q: What is your term of payment? A: 30% T/T in advance, Then 70% T/T or L/C balance before shipment. Packing Detail : 25Kg/bag 800 bags(20MT)/20' container , 1080 bags(27MT)/40' container
Polyvinyl Chloride (PVC), PolyPropylene Random Copolymer (PPRC), Polypropylene (PP), PolyEthylene (PE).
PP Injection and film grade can be used for producing Blown film work such as Clothes bag. It can also used in the production of Household appliances, plastic containers, Office equipment, Electrical parts, Large plastic bucket, Parts in the washing machine, Car parts and Refrigerator. specification Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 27-29 g/10min Density ASTM D792 = 0.921 g/ cm3 Melting Point by DSC ASTM D3418 = 129.5 ,165.5 C Tensile strength @Yield ASTM D 638 = 23.47 MPa %Elongation @ break ASTM D 638 =17.33% Flexural modulus ASTM D 790 = 928.28 MPa Flexural Strength ASTM D 790 =32.74 MPa Notched Izod Impact Strength ASTM D256 = 70.84 J/M Packing Detail 25Kg/bag 800 bags(20MT)/20' container , 1080 bags(27MT)/40' container Product each lots,It is depend on material scrap may be the specification can change a little. Q: Are you the manufacturer or trading company? A: We are both of the manufacturer and trading company. We have factory at Samut Sakorn and our office at Phra Pradaeng, Samut Prakan in Thailand. Q: Can you provide free samples? A: Sample is free, Buyer in charge of shipping cost. Q: How long is your delivery date? A: In general within 20 day after your prepayment, It according to quantity. Q: What is your term of payment? A: 30% T/T in advance, Then 70% T/T or L/C balance before shipment. If you are interested in our products please do not hesitate to contact us.
PP Injection and film grade can be used for producing Blown film work such as Clothes bag. It can also used in the production of Household appliances, plastic containers, Office equipment, Electrical parts, Large plastic bucket, Parts in the washing machine, Car parts and Refrigerator. specification Melt Flow Index (190 OC /2.16kg) ASTM D1238 = 27-29 g/10min Density ASTM D792 = 0.921 g/ cm3 Melting Point by DSC ASTM D3418 = 129.5 ,165.5 C Tensile strength @Yield ASTM D 638 = 23.47 MPa %Elongation @ break ASTM D 638 =17.33% Flexural modulus ASTM D 790 = 928.28 MPa Flexural Strength ASTM D 790 =32.74 MPa Notched Izod Impact Strength ASTM D256 = 70.84 J/M Packing Detail 25Kg/bag 800 bags(20MT)/20' container , 1080 bags(27MT)/40' container Product each lots,It is depend on material scrap may be the specification can change a little. Q: Are you the manufacturer or trading company? A: We are both of the manufacturer and trading company. We have factory at Samut Sakorn and our office at Phra Pradaeng, Samut Prakan in Thailand. Q: Can you provide free samples? A: Sample is free, Buyer in charge of shipping cost. Q: How long is your delivery date? A: In general within 20 day after your prepayment, It according to quantity. Q: What is your term of payment? A: 30% T/T in advance, Then 70% T/T or L/C balance before shipment. If you are interested in our products please do not hesitate to contact us.
HPMC is odorless, tasteless,non-toxic cellulose ethers producted from natural hIgh molecular cellulose through series of chemical processing and achieved.It is white powder with good water solubility. It has thickening, adhesion ,dispersing, emulsifying, film, suspended, adsorption, gel, and protetive colloid properties of surface activity and maintain moisture function properties ect.
1. A4009MFN1325 2. T60-475-119 3. B50-35H-111 4. HP50-25-155 5. J53â??08 N2000 6. T50-500 7. INpipe 100
1. TPPD30S 2. TPPF79FB 3. TPPD382BF 4. L R7175-35.P 5. L H5088-25G.O 6. L H5072-03.O 7. L H3066-03.O 8. L H3150-02.O