Small washing line. 500kg/h to 600kg/h This washing line can be used for the ps/abs flake scrap and crushed flake material It is can wash the material with little sand or dust! Work process: First, crusher cut the woven bag into small scrap And then the screw below the crusher to go on the pre-wash process with adding water (screw below the crusher) The high friction washer wash again with using the friction force! After that, the floating tank filter and wash the material Final, the firticon washer do wash process again All the material go to the centrifugal dryer Final, we can go on the pelletizing process! Any problem, welcome to put forward! Customerized
Purui pp, pe packaging film recycling pelletizing system Application of pp, pe film granulating plastic recycling machine: for recycling printed and heavily contaminated film materials Applicable plastic materials: pp, hdpe, ldpe, lldpe, tpv, abs and ps, and more Material shapes: film, bag and flake Material types: woven bag, printed ldpe film, film ( rolls, loose, bundled), waste agriculture film, foamed plastics (eps) and raffia Features of pp, pe granulating plastic recycling machine: The filter before the vacuum system achieves better degassing and filtering effect Material is cut, pre-dried, pre-heated, pre-homogenized and compacted in the shredding drum Many materials can be processed directly without need of the upstream pre-shredding, resulting in a dramatic reduction in operational costs Less power consumption cost per kilogram(film: 0.39kw/kg, flake: 0.35kw/kg), high throughput, reduced floor space occupation and operator attendance Screw and barrel: 38crmoa1a, nitrogen treatment Two hydraulic screen changers with good degass ModelMl85Ml85bMl100Ml100bMl130Ml130bMl160Ml160bMl180Ml180b Screw diameter(mm)85100130160180 L/d33:1-37 Rotatry speed(r/min)10-150 Output(kg/h)120-180200-350400-550600-800800-12001000-1500 Customerized
FRP Lighting Sheet Production Line Installation Size :50/60*2.6*3.5 m (L*W*H) Production Range : Corrugated or flat FRP lighting sheet,dust controlling sheet,colored sheet and antiseptic sheet of different colors. Installed Power :60KW - 110KW Required Power:30KW-60KW Production Efficiency :2-8m/min Equipment Performance: 1.Production Speed :1-8m/min 2.Able to produce FRP sheet with a thickness of 0.2-4.0 mm 3.Glass fiber yarn can be used for production to save cost and increase transmittance. Less manpower is required due to automatic control and it easy to operate. 4.Sheets of different shapes can be produced with the change of molds. 5.Wave height will be under 130mm. 6.Operators:4-6 7.Materials: unsaturated ployester resin, fiberglass chopped strand mat,glass fiber roving,BOPET film,pigment,curing agent and accelerator. 8.Application :industrial plants, warehouses, stadiums, shelters, gardens, agricultural greenhouses, corridors and canopies. Wooden Case
FRP Special Shaped Sheet Production Line Installation Size : 50/65*2/3*3.5 m (L*W*H) Production Range :special shaped sheet,gutter and special shaped corrosion resistant sheet of different colors. Installed Power: 80kw-120kw Required Power : 60-90 kw Production Efficiency :2-6m/min Sheet Thickness :2.0-5.0 mm Materials: unsaturated ployester resin, fiberglass chopped strand mat,glass fiber roving,BOPET film,pigment,curing agent and accelerator. Applications :Roof drainage, irrigation, and other special purpose products,etc. Wooden Case
FRP Gel Coat Sheet Production Line Installation Size:50/60*4/6*4.5 m(L*W*H) Production Range : Gel coated FRP lighting sheet ,flat sheet,dust suppression sheet,colored sheet and antiseptic sheet. Installed Power:70-120 kw Required Power:40-70 kw Production Efficiency :2-8m/min Equipment Performance: 1: Able to produce FRP gel coat sheet with a thickness of 0.6mm-4.0mm. 2:Sheets of different shapes can be produced with the change of molds. 3:Wave height will be under 130mm. 4:Operators:4-6 Materials :Unsaturated ployester resin, fiberglass chopped strand mat,glass fiber roving,BOPET film,pigment,curing agent and accelerator. Application: Industrial plants with acid and alkali corrosive gas and high-clean areas. Wooden Case
FRP Gel Coat Flat Sheet Production Line Installation Size : 50-80*2/4*3.5m (L*W*H) Production Range : FRP gel coat flat sheet,embossing sheet and decorative sheet of different colors. Installed power :100kw-160kw Required Power :40-80 kw Production Efficiency :2-6 m/min Sheet width :1000-3000 mm Gel coat thickness :0.2-1.0mm Sheet thickness :0.6-5.0 mm Materials: Unsaturated ployester resin, fiberglass chopped strand mat,glass fiber roving,BOPET film,pigment,curing agent and accelerator. Application :Truck, touring car, travel car, container, refrigerator, wall decoration board, ceiling board or other special purpose products. Wooden Case
Filming Embossing Machine Installation Size :3/5*2.5/4*2 m(L*W*H) Production Range :Embossed film Installed Power:30-80kw Required Power :20-60kw Production Efficiency :2-30m/min Operators:2-3 Able to continuous produce with production line. Wooden Case
Application and properties: Strong Plastic Crusher Machine has wide application and is used for crushing and recycling various plastic products and old materials. The entire machine is made of steel and features stable performance and long service life,and the machine performance won't be dropped by crushing materials after long term work. Adopt heavy-load bearing and oil seal with noise-isolating board,effectively prevent vibration and assure to protect the product from oil. Adopt electric control safe design,the motor is installed with overload protective device and power supply interlock protective design for assuring safety when cleaning. The cutter is flexible and adjustable,and can be sharpened repeatedly with ultra long service life.It is capable of easily crushing and cutting soft and hard plastic. Combine separated design,the materials falling door and filter of crushing chamber are easily for disassembling and cleaning.The feet are installed with slide wheels with convenient movement. TECHNICAL PARAMETERS Model: PC500A Diameter of Crushing Chamber(mm): 510x285mm Crushing Ability(kg/h): 360-720kg/h Motor Power(kw): 11kw Fixing Cutter(pcs): 4 Flexible Cutter(pcs): 15 Mechanical Dimension(mm): 1110x970x1450mm Weight(kg): 750kg Specifications:3phase,380V,50Hz(also can be 60Hz) Made of:steel Blades:spring steel/ high speed steel/ SKD-11 etc. Certificate:CE Warranty:one year Any question,please feel free to contact me, thanks: Skype: zifuziyan QQ: 1506162876 Ph: 86-13922354903 Website: http://www.cnhlong.com/en/ Mechanical Dimension(mm): 1110x970x1450mm Weight(kg): 750kg
Screw loader for SJZ 80/156 extruder SJZ 80/156 conical twin-screw extruder(PVC) Vacuum loader and drying hopper SJ50/30 single screw extruder(ASA) Extrusion mould and distributor Embossing roller Temperature controller Glazed-tile forming machine Cutter Stacker Ridge tile Oven Ridge tile Forming machine Screw loader for SRL-Z300/600 Mixer 2*40GP
Screw loader SJZ 80/156 conical twin-screw extruder Extrusion mould Pre-forming and stretching roller Forming mould Forming machine Side cutter Haul-off Cutter Stacker PLC control system(Siemens brand) 1-2 40GP
Plastic scrap grinder machine, en 24 steel plate..
Plastic extrusion machinery.
Plastic mixer.
PET/PE/PP waste plastic recycling machine.
Plastic processing equipment.
Plastic machines.
Plastic processing machine.
Plastic machinery.
Plastic processing machineries.
Plastic bending machine, welding machine, plastic bending and butt welder, plastic cutting machine.
