R-pet flakes Need recycle plastic flakes as follows description: 01. Washed , cleaned but with labels and rings( white colour ). 02. Washed , cleaned but without labels 03. Washed , cleaned but without labels ( green colour). 04.Washed , cleaned but without labels (blue colour). B specifications; IV 0.68 - 0.72, Melting point 253c, Moisture content
R-pet flakes Need recycle plastic flakes as follows description: 01. Washed , cleaned but with labels and rings( white colour ). 02. Washed , cleaned but without labels 03. Washed , cleaned but without labels ( green colour). 04.Washed , cleaned but without labels (blue colour). Specifications; iv 0.68 - 0.72, melting point 253c, moisture content
PET chips textile grade Textile Grade PET Chips A Grade used for manufacture of Filament POY. Having IV 0.635 Each 20 foot container should be stuffed with 1 ton Chips in poly bag. 20 Tons in a container
Pet bottle flakes Size of flakes : 8-10 mm IV : 0.8, Melting point : above 240 Degree C 25 kgs hdpe woven sacks
Polyetylene film (16-30 microns) food-grade PE film for packaging layer food packaging. 600mm to 1200mm width. In rools of 600mm-1200mm witdh. 300 kgs each roll.
Polypropylene with wood fibres
Lanyard plastic item Normal 8mm width
Polycarbonate sheet
Water proof Fire retardant Thermal insulation Various colours Economical Varies product to product
Plastic scrap Bulk or 50 kgs pack
Polyimide film Polyimide filmstructure and propertyour polyimide film is high-temperature formed by polymerizing and casting pyromellitic acid dianhydride and 4, 4oxydianiline with dimethylacetamide as an intermedium to form h-grade insulating film. Polyimide film is widely used for electrical and electronic appliances with properties of heat resistance , chemical resistance(almost no organic or inorganic solvents except for caustic alkali), dielectric, flame retardant, physical, mechanical and compounded with many materials performances.Its properties as below: Size: thichness0.025-0.125mm, width16-1040mm Specifications: 1) Physical and chemical performance: A. Thickness tolerance: 10%, B. Density: 1.40-1.44g/cm3, C. Tensile strength: lengthwise 145mpa, crosswise 130mpa D. Elongation (lengthwise/crosswise): (60%2) dielectric performance: A. Dielectric strength: 150kv/mm, B. Dielectric coefficient: 4, C. Tangent of dielectric loss angle: 0.004, D. Volume resistance: 1010 , surface resistance: 1013. 3) Heat resistance performance: A. Melt point : without, B. Heat shrinkage (at 200centigrade): 0.4%, C. Flammability: difficult to burn, self-quenching. D. Thermal resolution temperature: 470.4) chemical resistance:with strong corrosion resistant capability, our polyimide film can withstand the solution of any organic solvent. Except for caustic alkali, no any inorganic acid and alkali can make up corrosion on the film but a little boss in mechanical strength may be performed.Uses: extensively used in the field of space flight, aeronautics, navigation and nuclear industry, also used in traction motor of locomotive, diving oil motor and various h-grade high temperature-resistant motor for mine, capacitor, as well as wrap insulation for high temperature cable, electromagnetic line, and can make composite film, flexible copper-metallized plate, flexible printing board etc. Rolls in carton with plastic foam as liner
Polyester film Recommended nominal thickness is as follows: 25¬ªmf=50¬ªmf=75¬ªmf=100¬ªmf=125¬ªmf=150¬ªmf=188¬ªmf=200¬ªmf=250¬ªmf=300¬ªmf=350¬ªmf· Special requirements for thickness can be settled upon negotiation. -_100¬ªm tolerance f+5% 100¬ªm--300¬ªm tolerance f+4% 300¬ªm--350¬ªm tolerance f+6% 1.3 the deviation of diameter and width. Nominal width: 500mm & 1000mm Special requirements for width can be settled upon negotiation. The film can be supplied in tape. Rolls in carton with plastic foam as liner
Polypropylene film Specifications of polypropylene film AppearanceThe surface of the film is smooth and free of defects such as wrinkles,avulsions, grains, bubbles, dents and contaminations.The roll of film is winded tightly and free of the telescopicphenomena Dimensiona.Thickness and toleranceNominal thickness: 10.5 IM,12»m,14»m,15»m,16»m,17»m,18»m,19.5»m
MP Bulkhead retainer: A polypropylene cover stitched to webbing top and bottom which is secured at the opening of the container once the goods are loaded to secure them in position.
Pet bottle flakes 30kgs in weaven sacks
PET Film
PU foam Used for mattresses, cursians, pillows, packing material
P.E ropes
Made of hi-tech ul approved polymide film which is heat resistant to a high temperature of up to 450 degree c This newly developed fire escape smoke hood allows fire victims to have an extra 15 - 20 minutes of evacuation time. It's multi layer filter can filter out more than 20 types of fatal toxic gases occurred in a fire. (ie. Hcl, hcn, h2s, nh3, etc. 20pcs/inner box, 10 inner boxes/carton/n.W. 15.3kgs/g>w>16.6kgs/2.95cu.Ft
Non-slip ergonomic bimaterial handle. Polished & rounded end tynex filaments. Soft, medium and hard filaments. Protective cap. 6 assorted colours.
