Waterborne Acrylic Modified Saturated Polyester Resin Can be cured at between 120150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating. Performance Advantages: Low odor LOW VOC Non yellowing, even at high temperature curing Good hardness development Applications: All kinds of baking systems Metal primer and topcoats Industrial applications Spray, roller, brush or dipping can be used. 1, Product Composition: Waterborne Acrylic Modified Saturated Polyester Resin, Cosolvent 2, Typical Data: Type of polymer Waterborne acrylic modified saturated polyester resin Non-volatile(%) 70±2 Viscosity( 25, mpa*s) 30-70* PH ---- Neutral.agent Non neutralization OH value on solids (mgKOH/g) 105 Air dry Inapplicable Cross-Linking with amino resin Applicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3, Product Properties: Good hardness (>4H), high gloss; Good flexibility; Good solvent resistance; Low temperature fast cross-linking (110 20minutes); Excellent shear stability, can be grinded with dispersions directly. 4, Instructions: WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120â??. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying. PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce. 5, Storage: It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections. 6, Applications: Amino-baking top coatings. 7, Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
Rider Vivan Brand New Dark Cherry Rawhide Hand-Braided Romal Reins. Specially Hand-Crafted by Our Braiding Experts. Reins Are 16 Plaits & Romal Is 16 Plaits. Rein Part Is 55" Long Which Includes 3" Bit Loops. Romel Is 55" Which Includes The 10" Leather Popper. An Overall Length Of Product is 9' 4". These Reins Are Firm And Will Hold A Nice Drape In The Reins.
PL Series are polyester resin based thermoplastic pigments used for Plastic coloring / Masterbatch applications and are compatible with most polymers except PVC. The recommended usage temperature ranges from 130-240 °C. HTR Series are polyamide resin based thermoplastic pigments which offer improved properties as compared to PL series especially, very low mould plate out, heat resistance (up to 280 C brilliance etc.)
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric â?¥2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
D113 is a premium grade, weak acid, macroporous, cation resin supplied in the hydrogen form as moist, tough, uniform, spherical beads. Its ion exchange functionality is derived from the carboxylic group, which is easily converted to the hydrogen form and has a high affinity for divalent ions.D113 is intended for use in hydrogen cycle dealkalization, deionization, and chemical processing applications. D113 can also be supplied in the sodium form for use in sodium cycle applications such as softening and removal of heavy metal cations. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Macroporous spherical beads Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 4.2 eq/l min Moisture Retention, H+ form 45-52% Particle Size Range 0.3mm-1.2mm
Supplier in Bengbu, China D113 is a premium grade, weak acid, macroporous, cation resin supplied in the hydrogen form as moist, tough, uniform, spherical beads. Its ion exchange functionality is derived from the carboxylic group, which is easily converted to the hydrogen form and has a high affinity for divalent ions.D113 is intended for use in hydrogen cycle dealkalization, deionization, and chemical processing applications. D113 can also be supplied in the sodium form for use in sodium cycle applications such as softening and removal of heavy metal cations. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Macroporous spherical beads Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric4.2 eq/l min Moisture Retention, H+ form 45-52% Particle Size Range 0.3mm-1.2mm
Product Name Weak acid cation exchange resin (Macroporous) Sanxing Resin Article#: D113 Competitive Equivalents Amberlite IRC-84; Lewatit-CNP80 Application: Mainly used in industrial water treament, expecially to remove bicarbonate,carbonate, and other alkaline salts; Also can be used for zinc and nickel recycling, separation and purification of biochemical drugs. Typical physical and chemical properties: Matrix Structure acrylic acid series Appearance Milky or faint yellow non-transparent spherical grain Ionic form H Moisture content (%) 45.00~52.00 Total exchange capacity (mmol/g)
A type of basic liquid epoxy resin. It is colorless and light yellow viscous liquid with low toxicity. It is mainly used in coating,adhesive,antisepticising,electric insulation.Laminated plates and potting fields as well as the raw material for high-grade epoxy resin processing. Brand : CYD-128 Epoxy eqiovalent(g/eq) :184~194 Hydrolysable chlorine,wt% : 0.1 Viscosity (mPa2C) :11000~14000 Volatile,wt% : 0.2 Color(Gardner) : 0.1 Brand : CYD-127 Epoxy eqiovalent(g/eq) :180~190 Hydrolysable chlorine,wt% : 0.1 Viscosity (mPa2C) :8000~11000 Volatile,wt% : 0.2 Color(Gardner) : 0.1 Brand : E-44 Epoxy eqiovalent(g/eq) :210~240 Hydrolysable chlorine,wt% : 0.3 Viscosity (mPa2C) :11000~14000 Soften-ing point(C) :12-20 Volatile,wt% : 0.2 Color(Gardner) : 0.1
1. Description D113 is a premium grade, weak acid, macroporous, cation resin supplied in the hydrogen form as moist, tough, uniform, spherical beads. Its ion exchange functionality is derived from the carboxylic group, which is easily converted to the hydrogen form and has a high affinity for divalent ions.D113 is intended for use in hydrogen cycle dealkalization, deionization, and chemical processing applications. D113 can also be supplied in the sodium form for use in sodium cycle applications such as softening and removal of heavy metal cations. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Macroporous spherical beads Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 4.2 eq/l min Moisture Retention, H+ form 45-52% Particle Size Range 0.3mm-1.2mm
A type of basic resin.It is colorless or light yellow with low toxicity.It is widely in many fields such as coating,paint and antisepticising. Brand: Solid epoxy resin CYD-011 Epoxy equivalent(g/eq): 450~500 Hydrolysable chlorine, wt% : 0.1 Softening point(C):60~70 Soluble viscosity  (25C): D~F Volatile, wt% 0.6 Color (gardner) 0.5 Equivalent to the product of other company: DER671(DOW);1001(SHELL);NPES901;E-20
hydrogenated C9 hydrocarbon resin which compete and substitute C5 resin in Hot Melt Adhesive and Road marking paint
Product Features: SPSi-100 is a high performance matrix resin product used for tin-free self-polishing paint, it is only suitable for copper-containing formulations and can be blended with various amounts of CDP (Rosin) to satisfy different application requirements. The tin-free self-polishing antifouling coatings prepared by SPSi-100 could possess 4-5 years performance (the actual antifouling performance determined by paint formulation, ships speed & activity and sailing sea area environment), low VOC and excellent polishing rate. Typical general characteristics Value Polymer solids 49.5~50.5% Viscosity 140-220cps Density 1.01g/cm3 TYPICAL PHYSICAL PROPERTIES OF BASE POLYMER Mn 5500 Mw 17000 Tg 52â?? Theoretical Acid Number 117-122mgKOH/g Packing : 50kg,25kg, 180kg drum or 1000kg IBC drum. Storage: stored in a cool ,dry,shady and ventilated place,avoid fire contact. Safety: pls refer to our MSDS Shelf time: one year.
UV WAVELENGTH 405 nm, Compatible with SLA and DLP printers.
EpoSolv solvent is used for removing for resin sealers and phenolic compounds at the time of root canal re-treatment. INDICATIONS EpoSolv is a solvent for epoxy and other resin sealers during endodontic re-treatment. EpoSolv aids in the softening of phenolic resin type fillings.
