A water-cooled acousto-optic Q-Switch for use in high-power Nd:YAG laser systems. Combining top grade fused silica with high quality optical finishing and in-house anti-reflection coatings, this Q-Switch exhibits very low insertion loss and high damage threshold. Through an innovative design and manufacturing process, RF powers up to 100W may be applied. Standard options include a choice of frequencies (24 to 68MHz), active apertures (1 to 8mm), acoustic modes (compressional for linear polarisation, shear for unpolarised) and water connectors. Customised housings are available for OEMÆs.
A high power RF driver module is available in output powers of 50W, 75W or 100W. Powered from 220VAC or 110VAC, the modulation inputs allow either full digital control or activation of an internal pulse generator. First pulse suppression is automatically implemented.
Material BK7. Diameter tolerance -0.1mm . Thickness tolerance 0.1mm . Aperture >90%. Flatness l/4-l. Dig/scratch 60-40 .
Profile projectors have become an indispensable need of automobile, engineering goods, electrical, plastic & rubber industry because of the increasing demand for critical measurements with precision, accuracy & repeatability. Apart from the basic function of a profile projector, which is to project the magnified image of the component with the help of optics, sipconÆs profile projector comes with various options of D.R.O.S & software to measure geometrical dimensions (like roundness, parallelism etc.) & to perform all kind of reverse engineering operations, thanks to its compatibility with a large number of drawing & modeling softwares.
Coordinate measuring machine versatile, portable & low cost CMM for engineering institutes from SIPCON provides all the functionalities with a user friendly software from Metronics, USA is available in both manual & CNC system.
Profile projectors have become an indispensable need of automobile, engineering goods, electrical, plastic & rubber industry because of the increasing demand for critical measurements with precision, accuracy & repeatability. Apart from the basic function of a Profile Projector, which is to project the magnified image of the component with the help of optics, SIPCONÆs Profile Projector comes with various options of D.R.O.S & software to measure geometrical dimensions (like Roundness, Parallelism etc.) & to perform all kind of reverse engineering operations, thanks to its compatibility with a large number of drawing & modeling software.
For engineering institutes from SIPCON, provides all the functionalities with a user friendly software from Metronics, USA and is available in both manual & CNC system.
Waveplates (retardation plates or phase shifters) are made from materials which exhibit birefringence, we usually use quartz or quartz+bk7. There are several kinds of waveplates, multi-order waveplate, zero order waveplate, true zero order waveplate and dual wavelength waveplate. Our standard size is dia10mm, 12.7mm, 15mm, 20mm, 25.4mm and 30mm. Of course, other size and coating are available upon request. 1mm
Window: Windows are applied to isolate different physical environments while allowing light to passing through. We supply all kinds of windows, which are made from different materials such as bk7, fused silica and sapphire. Single layer or multiplayer anti-reflecting or high-reflecting coatings on optical windows are available upon customer's requirement.
Prism: Prisms are blocks of optical material with flat polished sides arranged at precisely controlled angles to each other, which deflect, deviate and rotate beams of light as well as dispersing their wavelengths. We could provide many kinds of high precision prisms, including as follows: Penta Prism Beamsplitter Penta Prism Dove Prism Right-Angle Prism BK7 Wedge Fused Silica Wedge Roof Prism Corner Cube Retroreflector Anamorphic Prism According to different application, you could choose different prism. If you want know more about them, pls kindly refer to our website. lens: Lenses have many applications ranging from the simple collection of the scanning of laser beams to precise imaging and image transfer. We provide these lenses as follows for different application. Plano Convex Lens Plano Concave Lens Double Convex Lens Double Concave Lens Achromatic Lens Cylindrical Lens According to different application, you could choose different lens with BK7 or fused silica material.
Mirror: Dielectric Laser Mirror Material: BK7 or UV grade Fused Silica Dimension Tolerance: +0.0/-0.2mm Thickness Tolerance: +/-0.2mm Clear Aperture: >90% Wedge: 99.5% for random polarization, rear surface uncoated Damage Threshold: >10J/cm2, 20ns, 20Hz, 1064nm Metal Coated Mirror Material: BK7 Dimension Tolerance: +0.0/-0.2mm Thickness Tolerance: +/-0.2mm Clear Aperture: >90% Flatness: ª-/10@632.8nm for flat mirror, ª-/4@632.8nm for Spherical mirror Wedge: 1J/cm2, 20ns, 20Hz, @1064nm Protected Aluminum Coating: Ravg>87%@400-1200nm Protected Silver Coating: Ravg>95%@400-12000nm Protected Gold Coating: Ravg>98%@2000-12000nm Part No. Coating Flatness Diameter(mm) Thickness(mm) MAL0125 AL Protected ª-/5 25.4 3.0 MAL0025 AL Protected ª-/10 25.4 6.35 MAG0125 AG Protected ª-/5 25.4 3.0 MAG0025 AG Protected ª-/10 25.4 6.35 MAU0125 AU Protected ª-/5 25.4 3.0 MAU0025 AU Protected ª-/10 25.4 6.35
Article No,: SP-LAMP-LP3 For projector: INFOCUS LP330 Lamp Life: 2000 H Original INFOCUS lamp with module and full manufacturer warranty Original Infocus packing
Fusion splicer
The 850nm bandpass filter is used in NIR imaging system to eliminate the influence of surrounding background light, including the visible and NIR light. This filter is to increase the signal/noise ratio of the imager. The applications include video surveillance, visual telephone, visual doorbell, digital telescope and other imaging systems. Specifications: SubstrateFloat glass Size2×2mm~81×81mm Thickness0.4, 0.5, 0.7, 1.1mm Surface Quality40/20, 60/40 Spectrum Characteristic400~800nm T85% Tmin>80% 9501100 nm Tave
Angle of incidence---------0° Substrate---------------------BK7, Float glass, B270, Borofloat33 Size-----------------------------Customized Application--------------------For image sensor that only requires NIR light. (The final detailed specifications are customized or suggested by Lenoptec. ) High visible light reflective mirror, also called Cold mirror, is designed to reflect the visible light at the reflectance of at least 90%, while pass the IR light at the transmission of at least 90%. Commonly applied to biometric devices that the sensor only requires NIR light to form the image. All Optical filters include: Acrylic Filter Dichroic Filter Beam Splitter Reflective Coating Interference Filter Waterproof and dustproof coating AR coating UV-IR Blocker IR Cut-off Filter Cartons
Plano-convex lens, aslo called positive lens, is used to converge incident light to a spot on the axis, at a certain distance behind the lens, which is knowed as focal length. It can form both real images and virtual images(for magnifier) on the two sides. The materials to make plano-convex lens can be BK7, Fused Cilica, sapphire and CaF2 etc., for different applications.This model are commonly applied in many devices including telescopes, collimators, magnifiers,optical transceivers, condensers and other optical display or imaging optical systems. AR/NIR or other coatings are available according to the applications. Material-------------------Fused cilica, BK7 Grade A or equivalent optical glasses Design Wavalength------546.1nm Diameter Tolerance------í+0.1mm, í+0.15mm for Dia.í¦75mm Paraxial Focus Length----í+2% Centration----------------85% Surface Figure------------ª-/4 @632.8nm Surface Quality-----------60-40 scratch and dig Coatings-------------------Antireflection coatings or NIR coatings Bevel-----------------------A slight protective bevel, such as 0.25mmí-45íp (For different applications, there are various choices in the specifications, which must be determined according to usersí» specific requirements.) Products include: Achromatic lens Meniscus Lens Double-concave Lens Plano-concave Lens Double-convex Lens Plano-convex Lens Cartons
Optical power meter Measuring range Bpm100 +8 ~ -70dbm Bpm101 +25 ~ -48dbm Calibrated wavelengths 850nm/1300nm/1310nm/1490nm/1550nm/1625nm Display resolving power 0.01db Connecting adapter Fc/pc Reference value set Yes Auto power off About 10 minutes (can be cancelled) Battery charge Yes Operate time Above 100 hours Power supply Aa * 2 Size 160mm * 75mm * 32mm Weight About 150g
Laser source Wavelength Bml221 1300nm & 850nm Bml223 1310nm & 1550nm Stabilization* 0.05db / 5minutes; 0.1db / 8hours Output power > - 5dbm Modulation 270hz, 1khz, 2khz Connecting adaptor Fc/pc Auto power off About 10 minutes Battery charge Yes Operate time Above 16 hours Power supply Aa * 2 Size 160mm * 75mm * 32mm Weight About 150g
Semiconductor Laser Filter, applied to blue and green semiconductor laser, to cut off the 808nm and 1064nm laser, while to pass the blue and green laser. Substrate---------D263T/B270/BK7 or customized Thickness---------0.3~1.1mm Surface Quality---40/20, 60/40 Square Size------(3~15)×(3~15)mm Round Size-------φ3~20mm (The final detailed specifications are customized or suggested by Lenoptec.) All Optical filters-Coatings include: Acrylic Filters Dichroic Filters Beam Splitters Reflective Coatings Interference Filter Waterproof and dustproof coatings AR coatings UV-IR Blockers IR Cut-off Filters Cartons
Achromatic lens is designed to limit the effects of chromatic and spherical abberation. It is corrected to bring two wavelengths(typically red and blue) into focus in the same plane. Achromatic lenses can be doublets or triplets, with two or three individual glasses cemented together. Material--------------------BK7 Grade A or equivalent optical glasses Design Wavalength-------480-650nm Diameter Tolerance-------í+0.1mm, í+0.15mm for Dia.í¦75mm Paraxial Focus Length-----í+2% @546.1nm Centration-----------------80% Surface Figure-------------ª-/4 @632.8nm Surface Quality------------60-40 scratches and dig Coatings-------------------Antireflection coatings or NIR coatings Bevel-----------------------A slight protective bevel (For different applications, there are various choices in the specifications, which must be determined according to users specific requirements.) Products include: Achromatic lens Meniscus Lens Double-concave Lens Plano-concave Lens Double-convex Lens Plano-convex Lens Cartons
