Optical Power Meter

Laser source

Wavelength
Bml221 1300nm & 850nm
Bml223 1310nm & 1550nm

Stabilization*
0.05db / 5minutes;
0.1db / 8hours

Output power
> - 5dbm

Modulation
270hz, 1khz, 2khz

Connecting adaptor
Fc/pc

Auto power off
About 10 minutes

Battery charge
Yes

Operate time
Above 16 hours

Power supply
Aa * 2




Size
160mm * 75mm * 32mm

Weight
About 150g

Fusion splicer pt-660
Features
Color lcd monitor and 256x magnification
Compact and lightweight
Reversible monitor with control panel on each side
Maximum wind velocity: 15m/s
8sec splice time, 40sec tube-heat time
Simultaneous x and y views
Large capacity internal battery
System test: ensures the best working condition
User programmable
Auto check fiber end face
Auto calibrate parameters
Store 8, 000 groups of splice results
Multiple language options
Specification
Model Pt-660
Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655)
Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬
16mmú¿coating diameter: 250 ~ 1000ª8mú¬
Fiber diameter Cladding diameterú¦80 ~150ª8m
Coating diameterú¦100~ 1000ª8m
Fiber count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm),
0.04db (ds), 0.04db( nzds)
Splicing time Typical 8 secú¼with standard sm fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ú+60db
Storage of splice result 4000 resultsú¼20 parameter per result
Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬
Tube heating time Typical 30 sec
Tube heating mode 8(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2n
Electrode life 2500
No.Of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner li-battery
Display screen 5 inch color lcd monitor
Image change over The fiber image is turned upside down
Terminals Usb 1.1 and vga
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s
Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah)
Dimensions 170mm(l) x170mm (w) x140mm (h)
Weight 2.7 kg excluding battery, 3.3 kg including battery

JX9010 is an optical fiber fusion splicer with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions.


According to clients needs.

Handheld OTDR is the newest instrument designed for testing FTTx network


According to clients needs.

Fusion splicer pt-630
Features
Fiber core can be display clearly
Singlex or y view and x & y view simultaneously
Auto check quality of cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color lcd monitor with clear digital image display
Simple operation menu
Software upgrade via usb interface
Specification
Model Pt-630
Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655)
Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬
16mmú¿coating diameter: 250 ~ 1000ª8mú¬
Fiber diameter Cladding diameterú¦80 ~150ª8m
Coating diameterú¦100~ 1000ª8m
Fiber count Single
Fiber aligning method Core aligning
Image processing method Digital
Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm),
0.04db (ds), 0.04db( nzds)
Splicing time Typical 9 secú¼with standard sm fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ú+60db
Storage of splice result 5000 resultsú¼3 parameter per result
Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬
Tube heating time Typical 30 sec
Tube heating mode 9(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2n
Electrode life 2500
No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery
Display screen 5 inch color lcd monitor
Image change over The fiber image is turned upside down
Terminals Rs 232
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s
Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah)
Dimensions 150mm(l) x150mm (w) x150mm (h)
Weight 2.7 kg excluding battery, 3.2 kg including battery

Fusion splicer pt-650
Features
Equel to fujikura fsm-50s, sumitomo type-37 etc
Core to core alignment by pas technology
( pas:profile alignment system)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch tft color lcd monitor with clear digital image display
Usb & vga interface
Software upgrade via usb interfac

Specefication
Model Pt-650
Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655)
Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬
16mmú¿coating diameter: 250 ~ 1000ª8mú¬
Fiber diameter Cladding diameterú¦80 ~150ª8m
Coating diameterú¦100~ 1000ª8m
Fiber count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm),
0.04db (ds), 0.04db( nzds)
Splicing time Typical 9 secú¼with standard sm fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ú+60db
Storage of splice result 4000 resultsú¼20 parameter per result
Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬
Tube heating time Typical 30 sec
Tube heating mode 9(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2n
Electrode life 2500

Properties
1. Excellent transparency, outstanding resistance to aging.

2. It has good insulating properties and mechanical strength; to acid, alkali, salt has a strong resistance to corrosion; and because easy processing.

Applications
1.Extruded sheets for signage, displays and building material

2.Motive parts such as tail lamps, meter covers and sun visors

3.General sundries such as tableware, kitchenware, giftware and bathroom accessories

4.Optical lenses such as sunglasses, reading glasses and camera lenses

5.Light guide panels for LCD displays

6.Other applications such as mobile phone display panels, clock covers, lighting covers/accessories, optical fibres, toys, etc.