PTFE Wax for Coating and Ink
Fischer Tropsch wax Grade: Candle grade Usage and Advantage Usage :This wax is Fischer-Tropsch wax can completely replace the pafaffine wax and slack wax applied in the candle industry. End user can reduce the input proportion and save 20% cost . This wax is widely used for cup candle products . Advantages : Less smoke, resistant to burning, more white color , power state easy for production and save the cost .
Scope Automatic freezing point and pour point tester in line with gb / t510, gb / t3535 national standards, the use of a plurality of components of the master microcontroller, automatic cooling, automatic climate control, automatic detection and automatic printout. Features 1, large-screen lcd display, english prompts 2, keyboard control, easy to operate multi-mode control program 3, using the united states imported testing equipment, good stability, high sensitivity, high reliability 4, instruments and equipment imported to take similar detection device can detect trace samples, speed, and high reproducibility of the results 5, automatic freezing point and pour point tester using imported overlay compressor refrigeration systems, cooling speed, depth and temperature cooling effect are better than the same industry 6, reserved for usb communication interface with the host computer communication, ease of centralized management system consisting of Technical parameters 1, the use of the environment: temperature 0 ~ 60 ? relative humidity: = 80% 2, the test holes: two holes 3, temperature range: + 50 ? ~ -45 ? (temperature can be customized according to customer requirements) 4, temperature accuracy:
Scope Automatic freezing point tester of petroleum products according to national standards gb / t510 "oil freezing point" provides design and manufacture. Features 1, large-screen lcd display, english prompts 2, keyboard control, easy to operate multi-mode control program 3, using the united states imported testing equipment, good stability, high sensitivity, high reliability 4, instruments and equipment imported to take similar detection device can detect trace samples, speed, and high reproducibility of the results 5, automatic freezing point tester using imported overlay compressor refrigeration systems, cooling speed, depth and temperature cooling effect are better than the same industry 6, reserved for usb communication interface with the host computer communication, ease of centralized management system consisting of Technical parameters 1, the unit of work: the two groups were detected were detected 2, the cooling temperature: + 50 ~ -45 ? 3, cooling method: imported compressor 4, trace detection: 4ml sample test 5, control: scm control 6, work: automatic measurement, automatic calculation results 8, total power: 800w 9, power supply: ac220v 50hz
Scope Automatic cold filter plugging point tester national standard sh / t 0248 as the basis, using modern advanced technology, mechanical, optical, electronic and computer technology, and can be done automatically test the cold filter plugging point of petroleum products, automatic cold filter plugging point analyzer using optical detection technology, imported compressor refrigeration system ensure the required refrigeration depth. Automatic cold filter plugging point tester reasonable structure, stable performance, simple operation, is the ideal detection equipment. Features 1. High degree of automation equipment, automatic cooling, automatic sample aspiration, automatic detection, automatic save the results, the test process without human intervention; 2, the instrument configuration of two experimental units do parallel test can also detect single group; 3, instrument automation control technology, human-friendly interface, photoelectric automatic detection; 4, instrument with integrated design, to avoid damage due to vibration of the floe and the impact of the test data. 5, the instrument uses photoelectric liquid level sensor can accurately detect the position of the horizontal surface, the cold filter plugging point accurate judgment. 6, the instrument uses a built-in vacuum pump and electronic precision pressure balance system to ensure automatic balancing suction filtration pressure at the set value. 7, the instrument can automatically control the cooling medium and the temperature difference between the sample being tested, to ensure a controlled and uniform cooling rate stable. Technical parameters 1, the temperature measuring range: -45 ~ 50 ?; resolution 0.1 ? 2, the pressure measuring range: 0 ~ 200.0kpa; resolution 1pa 3, the test samples: 2-way 4, temperature measurement element: pt100 5, detection method: a photodetector 6. Refrigeration: refrigeration compressors 7, the control mode: single-chip control 8, the ambient temperature: 10 ~ 35 ?
Scope This instrument conforms to astm d445 standard, the instrument is used to measure the kinematic viscosity of liquid petroleum products (newton liquid) at a constant temperature. Kinematic viscosity is the product of the viscosity of the liquid at a constant temperature and the density of the liquid at the same temperature. Features 1, imported omron temperature controller, lcd, temperature accuracy of ± 0.1 ?. 2, using a hard glass tank, good insulation properties, the specimen was observed clear. 3, using a desktop, one machine design approach, the instrument overall good, easy to use. 4, use of electric stirring device, temperature uniformity bathtub 5, the instrument comes with expert self-tuning capabilities, more precise temperature control Technical parameters 1 power supply: ac 220v ± 10%, 50hz ± 5%. 2 heating power: 1800w. 3, stirring motor: power 6w; speed 1200r / min. 4, temperature range: room temperature ~ 100 ?. 5, temperature control accuracy: ± 0.1 ?. 6, constant temperature bath: capacity, 20l; 7, the use of environment: temperature -10 ? ~ + 35 ?, relative humidity
Scope The instrument complies with gb / t265-88, astm d445 standard, measuring liquid petroleum products (newton liquids) kinematic viscosity, in units of m2 / s, usually mm2 / s in practice. Kinematic viscosity of the liquid at a constant temperature measured kinematic viscosity and density of the product at the same temperature of the liquid. Features 1. Using cascade spiral refrigeration technology, refrigeration speed, high double-loop design, reliability 2, can simultaneously detect two samples, user-friendly operating parallel samples 3, using dewar design, low temperature fogging 4, using split design, easy maintenance Technical parameters 1, cooling mode: compressor refrigeration 2, temperature control mode: automatic temperature control; 3, temperature range: -60 ~ 20 ?; 4, temperature accuracy: ± 0 1 ?; 5, the heating power: 150w;
Scope Petroleum products motion detector according to national standards gb / t265 regulations designed and manufactured for the determination of kinematic viscosity of liquid petroleum products. English lcd screen display, interactive interface, preset temperature, test time and other parameters menu prompts input, design aesthetic appearance, is the introduction of new instruments. Features 1, the lcd screen english display, interactive interface, preset temperature, test time and other parameters, menu prompts input 2, the actuator using advanced ssr, which is characterized by non-contact, no action noise, no spark, vibration resistance, long life. 3, bath heater and draft tube internal parts such as the use of stainless steel, corrosion-resistant and durable. 4, automatic calculation and testing of the capillary constant time average of the product; the high precision temperature control, good accuracy. 5, the introduction of imported xecom us data processing chip, fast and accurate data processing 6-cylinder design, better insulation and protective measures 7, automatic countdown function, automatic calculation results Technical parameters 1, the control temperature settings: room temperature ~ 100 ? 2, the number of samples: 2 3, constant temperature accuracy: ± 0.1 4. Display: lcd 5, results processing: automatic calculation of results 6. Countdown: automatic countdown 7, heater power: 1000w 8, work power source: 220v ± 10% 50hz 9, ambient temperature: room temperature ~ 35 ? 10, weight: 25kg
Fuel oil CST280 and 380 from Iran. FOB or CIF deliveries with own vessels, when: 1. Buyer presents an inquiry - a Letter of Intent with all company information to be able to make Due Diligence. 2. Buyer's/Trader's financial capabilities and DD are analysed. Our group of companies act like facilitators or sellers - depending on buying conditions FOB or CIF. CIF supply can be arranged under negotiated conditions.
Iranian base oil, virgin oil, various lubricants and transmission oils from Iranol. FOB or CIF deliveries available.
Specifications:- 1)Origin:Russia 2)Ash Content,not more %: 0.1 3)Mass fraction of sulphur,not more % -low-sulphur-residual-oil :0.5 4)Temperature of the flash,not less °C in the closed crucible in the open crucible °C :110 min 5)The temperature of solidification,not higher °C :25 6)Kinematics viscosity at 50°C: 118 max 7)Water Content: 0.5% 8)Mechanical Impurities:Lower than 0.1% 9)Acidity:Lower than 5mg KOH/100 ml 10)Gross Calorific value Kcal/kg/KJ/kg: Min 9200/41300 11)Density at 15.0 deg. C kg/l: 0.880-0.9200 12)Hydrogen sulfide content (H2S)pom:0.5 max 13)Carbon Residua:Lower than 7% 14)Vanadium (V) ppm : 30% MAX 15)Aluminium (Al) ppm : 5 16)Silikon (Si) ppm :12 17)Nickel ((NI) ppm :49 18)Asphaltenes :/ :3.6% 50,000-250,000 MT/month with roll for extension 100-75x50mmx75cm Tanks
Scope Petroleum products chroma meter was designed and manufactured according to the national petrochemical industry standard sh / t0168-92 standards "petroleum products chroma law". It can determine the colors of various lubricants and other petroleum products. The determination method is to inject the test sample into the color tube, and then compare with the standard color film to determine its color number. Features 1, the instrument uses molding technology, the whole structure is more reasonable and durable. 2, the system used by the us ybs optical refraction angle without manual adjustment, clear vision, no blind spots, the result is more accurate observation. 3, self zoom design, lighting control system makes the instrument more operational. 4, the instrument uses canosn color wheel, to ensure the accuracy of the results. 5, the instrument uses a belt drive structure, easy color number conversion operation, no noise. Environmental protection 6, reasonable structure design, can also see the two semi-color. 7. The color number corresponds to astm d1500, gb / t6540 and iso color number. Technical parameters 1) light source system: automatic control source size 2) colorimetric tube: standard requirements, special cuvette 3) color plate standard color plate: canosn color wheel 4) zoom system: independent zoom 5) transmission: belt drive 6) optical system: optical system us ybs
Scope This instrument conforms to gb/t 12005.1, gb/t 17931, gb/t 14190 requirements. High degree of automation, good repeatability of test results Features 1, using computer control, human-friendly interface that prompts operation 2, to achieve a fully automated test process, automatic extraction, automatic detection, automatic cleaning, automatic drying, without manual intervention 3, using 2 independent cleaning control system, but can also operate independently test 4, dual pipe detection, but also can detect asynchronous Technical parameters 1, temperature control accuracy: ± =0.1 ? 2, the measurement accuracy: ± 0.05 s 3, the maximum timing time: 999.9 seconds 4, the temperature control point: 0 ? -100 ? 5, maximum power: 2000w 6, power: ac220v ± 10v 50hz ± 5% 7. Overall size: 700 × 430 × 700mm 8, viscometer model: standard ubbelohde
Scope This instrument conforms to gb/t8019 iso6246 astm d381 standards. It is used to determine the actual resin content in aviation gasoline and gasoline. Features 1, the instrument adopts the metal bath heating system, the heating speed is quick, the bath body temperature is uniform. 2, the instrument configuration of the voltage regulator system, in the experimental process, the air intake is smooth, safe 3, the instrument is equipped with an independent air supply system, can independently regulate the flow of hot air of each test hole, the heat air flow control is accurate and reliable. 4, the instrument uses the imported (omron) temperature controller, liquid crystal display, high precision temperature control, low failure rate 5, the instrument used to protect the circuit, to avoid voltage or current increase on the instrument and operator damage Technical parameters 1 power supply: 220v ± 10%, 50hz, 2.5kw. 2, the heating method: heating the metal bath 3, test holes: 3. 5, the working temperature: 160 ~ 165 ?. 6, the temperature control method: automatic temperature control. 7, the temperature display: digital display. 8, flow display: meter display. 10, gas source: external air, > 1000 ± 150ml / sec.
We supply polymer products from iranian hi-tech producer. Pe, pp, hdpe, lldpe, ldpe various types upon request. Deliveries fob iran or cif.
Product: Fully Refined Paraffin Wax 58-60 Melting point: 58-60 deg.c Color: +27min Packing: 25kg cartons or 50kg bags
Description RD3190 has been developed to formulate high quality automotive engine oils and multigrade oils. The following performance levels can be achieved with oils formulated with RD3190. The Recommend Dosage Performance Level Dosage wt% SN/CF 12.6 SL/CF 12.3 Characteristics Item Typical Value Test Method Flash point (COC) 180min GB/T3536 Kinematic Viscosity (100),mm2/s Report GB/T265 TBN, mg KOH/g 80 SH/T0251 Calcium, m% 2.45 SH/T0270 Zinc, m% 0.86 SH/T0226 Phosphorus, m% 0.78 SH/T0296 Nitrogen, m% 0.78 SH/T0224 Sulfur, m% 2.54 SH/T0303 Molybdenum, m% 0.03 Spectrophotometry The product is packed in 200 liter metal drum (net weight:200 kg/drum).
Our product based on bio-activated carbon, focuses on use in animal nutrition, medicine, cosmetics, purification: water, alcohol and gases, soil improvement, as well as for industrial purposes. Bio-activated carbon can be used in many ways. Bio-char itself is not a fertilizer or a nutrient, but thanks to its surface structure (1g ~ 300 m�²) it provides ideal storage of water and nutrients, as well as a habitat for beneficial microorganisms. Due to the stability of decomposition in the soil and its aggressive effect on bacteria and fungi, B AAio-carbon is a sustainable and long-lasting soil improver. To produce our Bio-charcoals, we use only unprocessed hazel wood (hardwood and biomass) from the ecologically growing region. In the carbonization process. Feed coal Ground coal Filtration, dry disinfection, construction, medicine..
We provide international standard Quality Activated carbon. We supply coconut base carbon and also wood base carbon grades.
Granular Activated Carbon (GAC) generally is an organic carbon filtration media of wood, coconut shells and coal. GAC used for water purification. GAC can remove certain chemicals, particularly organic contaminants from water as well as chemicals that produce odors or tastes to water such as hydrogen sulfide or chlorine. Other chemicals, specifically iron and nitrate, can not be removed with GAC. Also GAC should be changed based on contaminant levels and water use as higher levels or use may require more frequent change-outs. Granular Activated Carbon Products range from the size 0.2mm to 4mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface.
