we offer all or almost all petroleum products and derivatives, in desired quantities and at competitive conditions.
Automotive Gas Oil (AGO) is also known as diesel because it is a by-product of crude oil. It is gotten in the mid-boiling range of the crude oil refining process. AGO is a less flammable fuel compared to other petroleum products such as premium motor spirit. AGO is used in two main types of vehicles namely heavy-duty vehicles, such as trucks and buses and light-duty vehicles, such as vans and passenger cars. Both oil and natural gas are made up primarily of hydrocarbon (H), which is a chemical compound consisting entirely of carbon (C) and hydrogen (H). They can be classified further into a variety of types depending on the structure of molecules and how they are bound.
The full name of Jet Fuel A1 is the aviation Kerosene Colonial Grade 54 Jet Fuel JP 54 Jet fuel designed for use in aircraft powered by gasturbine engines It is clear to strawcolored in appearance The most commonly used fuels for commercial aviation are Jet A and Jet A1 which are produced to a standardized international specification Jet fuel is a mixture of a large number of different hydrocarbons The range of their sizes is restricted by the requirements for the product for example the freezing point or smoke point Kerosenetype jet fuel has a carbon number distribution between about 8 and 16 carbon numbers carbon atoms per molecule wide cut or naphthatype jet fuel including Jet B between about 5 and 15 carbon number Jet A1 is the standard specification fuel used in the rest of the world Jet A1 has a flash point higher than 38C 100 F with an autoignition temperature of 210 C 410 F
Fuel Oil is a fraction obtained from petroleum distillation either as a distillate or a residue Broadly speaking oil is any liquid petroleum product which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power except oils having a flash point of approximately 40 C 104 F Oil is made of long hydrocarbon chains particularly alkanes cycloalkanes and aromatics The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil heavier than gasoline and naphtha Fuel oils are used as fuel for power generation marine bunkers and large industrial heating plants Fuel oil 180 CST also known as Bunker Fuel or Residual Fuel Oil is characterized by its viscosity which is measured in centistokes CST The number 180 indicates the maximum viscosity of the oil at 50 degrees Celsius This specification makes it a relatively thick and viscous fuel compared to lighter fuel oils Both CST 180 and CST 380 fuel oils are considered heavy fuel oils and are commonly used in the shipping industry They are often referred to as bunker fuels and are used in vessels like cargo ships container ships and oil tankers
Mazut a heavy lowquality fuel used in power generating plants and similar applications In the US and Western Europe mazut is blended or broken down with the final product that is diesel The Mazut100 is a fuel that is produced under the GOST specifications for example GOST 1058599 Mazut is almost exclusively manufactured in the Russian Federation Kazakhstan Azerbaijan and Turkmenistan The most important thing is to qualify the fuel sulfur content The VLS Mazut 10075 and 10099 Mazut Grade I are actually the same thing GOST merged the old classifications of 75 and 99 in a new classification of seven degrees all under 10099 For some reason many people still use the old adjective 75 particularly the Chinese
Jet A1 is a� kerosene-type fuel. Jet fuel or aviation turbine fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colorless to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1, which are produced to a standardized international specification. During the refining process only 8% of the crude oil is made up of Jet fuel.
Speciality The products offered by Matr Consulting are 3 wide range of Industrial Lubricants, Automotive Lubricants & petroleum. Products with standard specifications are made by reputable companies and delivered to us. These products are prepared and delivered to the customer based on the type of customer request. All financial payments are in cash Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. Unlike petrochemicals, which are a collection of well-defined usually pure organic compounds, petroleum products are complex mixtures. The majority of petroleum is converted to petroleum products, which includes several classes of fuels Lubricants (produces light machine oils, motor oils, and greases, adding viscosity stabilizers as required), usually shipped in bulk to an offsite packaging plant
Separated by the melting point, the paraffin wax is usually at 2 C, as in us: 54-56 C, 56-58 C, 58-60 C, 60-62 C, 64-66 C. All types of wax products must withstand cold well for paraffin wax, which means that it does not melt or soften and does not deform at a specific temperature. Depending on the conditions of use, locations and seasons of use, as well as differences in the method of use, commercial paraffin wax is required for a series of different melting levels. Separated by oil knowledge, it can often be divided into: Fully refined paraffin, Semi-refined paraffin, and Crude wax. In addition, paraffin wax needs to be heat resistant, oil resistant and light resistant, otherwise the color will turn yellow after application. Excessive oil exposure impairs the color and stability of the paraffin wax, and also reduces its hardness. The main factors that affect the stability of paraffin wax are its non-hydrocarbon compounds and the low concentration of hydrocarbons.
Product Name: Palm Wax Type: Industrial Grade Origin: China AUCO No.: 998 Packing: 25kg bag Items Standard Acid value, (mg KOH/g) 6.0 Peroxide value, mmol/kg 1.5 Free Fatty Acids 0.1 Colour (Lovibond colorimeter 133.4mm cell) 2.0R Melting point, 42-62
Product Name: Palm Wax Type: Industrial Grade Origin: China AUCO No.: 998 Packing: 25kg bag Items Standard Acid value, (mg KOH/g) 6.0 Peroxide value, mmol/kg 1.5 Free Fatty Acids 0.1 Colour (Lovibond colorimeter 133.4mm cell) 2.0R Melting point, 42-62
Product Name: Gel Wax Type: Industrial Grade Origin: China AUCO No.: 997 Packing: 25kg bag Items Standard Colour Transparent Moisture and volatiles % 1 Melting point, 50-80
Dear buyer! We can provide services for the purchase of Aviation Turbine Fuel (Jet A1, JA1, JP A1) for export. Origin: Kazakhstan/ Russia, MOQ:500.000BBLS, FOB price: $73/$69, CIF price: $69/$65 (Gross and Net respectively). contact us for the procedure. Note: Seller do not work according to someone else's procedures. The seller will deliver on the terms: CIF / FOB ports ROTTERDAM, SHARJAH UAE/MERSIN TURKEY, UST-LUGA.
Paraffin are products produced in oil refineries, from the deparaffination of mineral oils. Paraffins have many applications and are available in different formats: solid paraffin (slabs, pellets, powder) and liquid paraffin. Paraffin wax is a highly popular, clean burning wax which has a brilliant scent throw when compared to naturally sourced waxes.Often pure white and made from petroleum, paraffin wax is easy to work with, stable when shaped and odourless when burnt. The wax mixes well with all dyes and scents we provide with no adverse effects making it the ideal wax for candle making beginners and adepts alike. Paraffin wax is used for many products, including candles, paper coating and other industrial uses. It is white and comes in a variety of melt points. It can be used alone or as an additive to provide specific properties to a product. Blended Waxes has a variety of domestically sourced paraffin wax products available. If you are looking for a paraffin wax with a custom melt pointï¼?Junda is your excellent choice !
Fushun 0.5%oil content refined solid paraffin wax, kunlun brand. Paraffin Wax 1.100% Pure Paraffin Wax 2.ISO 9001 proved 3. Transparent and White 4.Low Oil Content 5. SGS 6. REACH Fully refined and semi refined paraffin wax is used widely, mainly used as candles,board,plastics,rubber and other commodity(like waxed paper ,crayons,candles,carbon paper) of the component and packing materials, baking container with dressing, used for electrical components, insulation rubber aging resistance and increased flexibility, etc.
Paraffin waxes in a solid state are usually white, translucent, tasteless and odorless. They are hard, relatively brittle and have a slightly dry feel. In a molten state, paraffin waxes are clear, colorless liquids of low viscosity. When melted, these waxes increase in volume by about 5-8%, resulting in a decrease in density. Paraffin will react at high temperatures with either oxidizing or halogenating agents. This reaction produces either fatty acids and hydroxy acids or halogen substitution products respectively. Although paraffin has many useful characteristics, most commercial applications are based on its resistance to water and vapor and its glossy appearance when polished.
Aqueous Urea Solution or diesel exhaust fluid (DEF) reduces harmful NOx emissions from diesel engines and enable diesel passenger cars to comply with the Euro 6 exhaust standard. AdBlue, DEF & ARLA 32 are the global alternative brands for Aqueous Urea Solution products (AUS). Our supply of Aqueous Urea Solution is mainly directed to our clients in Europe.
Superior product quality Herrera Petroleum Corp Herrera Petroleum Corporation buys and sells petroleum refined products. The Company offers gasoline, crude oil, alcohol, diesel, and fuels. Herrera Petroleum serves its clients in the State of Florida.Maximum 0.00015% water dilution/Contamination It is not uncommon to have higher water content Colonial Pipeline Specs Cleaner burning fuel, high efficiency Guaranteed cost savings Flexible Terms
Diesel exhaust fluid (DEF) is an aqueous urea solution made with 32.5 percent high-purity urea (AUS 32) and 67.5 percent deionized water. DEF is used as a consumable in Selective Catalytic Reduction (SCR) in order to lower NOx concentration in the diesel exhaust emissions from diesel engines. PRODUCT SPECIFICATION SHEET Urea Liquor 50% DEF Grade Typical Chemical Analysis Parameter Specification Urea Concentration, wt.% 50.0 +- 1.0 Free Ammonia (alkalinity), wt.% 0.31 max Biuret, wt.% 0.46 max Parameter Typical Urea Concentration 32.5 +- 0.7 % Density at 20 oC 1087.0 -1093.0 kg/m3 Refractive Index at 20 oC 1.3814 �¢?? 1.3843 Free Ammonia (alkalinity) 0.2% max Biuret 0.3% max Aldehydes 5 ppm max Insoluble Matter 20 ppm max Phosphates 0.5 ppm max Calcium 0.5 ppm max Iron 0.5 ppm max Copper 0.2 ppm max Zinc 0.2 ppm max Chromium 0.2 ppm max Nickel 0.2 ppm max Aluminum 0.5 ppm max Magnesium 0.5 ppm max Sodium 0.5 ppm max Potassium 0.5 ppm max Water Quality DEMIN ISO 3696 Applicable
Item Parameters Specified Value 1. Appearance Clear, transparent, without water and a) Visual suspended particles at ambient temperature . b) Color (Saybolt Scale Points) Not specified, analysis to be required c) Total sediments, mg/dm max - 1.0 2. Acidity, mg KOH/g, max - 0.10 3. Aromatic hydrocarbons, vol. %, max - 25.0 4. Mercaptan sulphur, wt. %, max - 0.0030 Or Doctor test negative 5. Total sulphur, wt. %, max - 0.25 6. Distillation, C 10% distillated at temperature, C not higher than 205.0 50% distillated at temperature, C Not specified, analysis to be required 90% distillated at temperature, C not higher than 300.0 residue, %, max 1.5 losses, %, max 1.5 7. Flash point, C, not lower than - 38.0 8. Density at 15 C, kg/m - 775.0-840.0 9. Pour point, C, not higher than - Minus 47.0 10. Kinematic Viscosity at minus 20C, - 8.000 m /s, max 11. Net calorific value, MJ/kg, min - 42.80 12. Smoke point, mm, min - 25.0 or with naphthalene hydrocarbons - 19.0 vol.% = max. 3%,min. 13. Copper corrosion test at 100C, during 2 h �?�± 5 min, - 1 during 2 h �± 5 min, class, max 14. Thermal oxidation stability - 3.3 (25.0) determined by JFTOT at Temperature not lower than 260 �?�°C, - 3 during 2.5 h Pressure drop at filter, Without any deposits of abnormal or kPa (mm Hg), max Deposits on tube, less than peacock (iridescence) color 15. Actual gum concentration, - 7 mg/100 c , max. 16. Interaction with water : a) state of interface, points, max - 1b b) light transmission measurement - 85 by micro separator, min. without antistatic additive 17. Specific conductivity, pSm/m, - 10 for fuel without antistatic additive, max. 18. Lubricity : wear scar diameter, mm, max - 0.85
Origin: Kazakhstan Quantity: One Hundred Thousand (100,000) Metric Tons With R&e Into Yearly Contract Loading Ports: Rotterdam / Houston / Kazakhstan / Fujairah / Jorong Ports Inspection: Sgs for the Quality & Quantity Test Report Insurance: Paid by Seller, Covering 110% of Shipment Value Terms of Selling , Fob , Cif , Tto ,ttv ,ttia
