Petroleum By Products Suppliers and Manufacturers

LPG GAS GOST 20488-90

Maximum : 100,000 MT/Month

Russia Export Blend Crude Min :500000 BARREL/Month Max :2000000 BARREL/Month

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Bitumen, a highly viscous and black hydrocarbon, plays a crucial role in civil engineering due to its remarkable properties and versatile applications. As a binder in asphalt mixes, it provides durability, strength, and resistance to traffic and climate-induced stresses. Commodity: Bitumen Grades 35/50, 40/50, 50/70, 60/70, 70/100, 80/100 & VG3 Quantity available: Min 100MT and Max 50,000 MT/ Month. Packing: New steel drum, 110 drums fitted in 20ft' container A) Steel Thickness: 0.6 MM B) Height :980 MM C) Diameter: 50 CM Terms of Payment: Irrevocable, Confirmed, Non-Transferable LC 100% at Sight via Dubai OR 30% Cash in Advance and 70% balance against Custom Clearance Documents.

We're a UK company, presenting a GENUINE SELLER for LNG- Liquified Natural Gas.. Origin: South Korean... MOQ: 100,000 MT / month ... Pricing: is up to region of delivery, as World market price minus 12% (APAC methodology / EURO methodology / AGAA methodology) ... The seller supplies only as CIF and Vessel Take Over only. The Seller is the OWNER and TITLE HOLDER ... SBLC MT760 is accepted as NON-TRANSFERABLE, NON-OPERATIVE, and Payment is through MT103 after delivery and Q&Q analysis if needed by the Buyer.... NO DOWNPAYMENT, NO DEPOSIT is required .... The Seller don't do Spot or Trial or Dip and Pay, is only contracts, is a SERIOUS and GENUINE Seller ..... The Seller's Bank is a financial institution from the top 50 in the world. The Seller's Bankers are Bank of America, Houston, USA ... We're looking for RWA BUYERS .... Contact: Usama

We're a UK company, presenting a GENUINE SELLER for ESPO CRUDE OIL .. Origin: RUSSIAN ... MOQ: 1.000.000 BBL / month ... Pricing: 8.0% DISCOUNT AGAINST DATED BRENT ... The seller can supply as CIF and Vessel Take Over only. The Seller is the TITLE HOLDER ... SBLC MT760 is accepted as NON-TRANSFERABLE, NON-OPERATIVE and is issued to the SELLER (not to a fiduciary).. We're looking for RWA BUYERS .... Contact: Usama

We're a UK company, presenting a GENUINE SELLER for LPG- Liquified Petroleum Gas.. Origin: EUROPEAN AND/OR OMAN ... MOQ: 88,000 MT / month (2X VLCG's) ... Pricing: is 8% DISCOUNT ON ARAMCO ... The seller can supply as CIF and Vessel Take Over only. The Seller is the TITLE HOLDER ... SBLC MT760 is accepted as NON-TRANSFERABLE, NON-OPERATIVE and is issued to the SELLER (not to a fiduciary).. We're looking for RWA BUYERS .... Contact: Usama

Bitumen produced by refineries in the Russian Federation, Kazakhstan, and elsewhere, is available for sale FOB or CIF at the best prices. Prices are negotiable for serious big-volume buyers. Buyer's mandate welcome. 30/40 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 40/50 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 50/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 60/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 80/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 85/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 100/120 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT

Product Description Standard Product Price of product ( USD price or FOB price) : To be negotiated (CIF, L/C) Product origin : Russian Key Specifications/Special Features : "Basis: Composition % Nitrogen: 6% Methane: 83% Ethane: 7% Propane: 2% Butane: 1% C5+: 1% Total: 100%" Minimum Order Size and Packaging details : To be negotiated

REBCO (Russian Export Blend Crude Oil) is a sort of Russian Export Crude Oil with a mixture formed in the system of pipeline Transneft by mixing heavy sour crude Ural from the Volga region and low-sulfur oil in Western Siberia, the relevant characteristics to the brand Urals. Urals brand oil is supplied through the Baku-Novorossiysk pipeline system and the Druzhba pipeline. Components of petroleum are separated using a technique called fractional distillation, i.e. separation of a liquid mixture into fractions differing in boiling point by means of distillation, typically using a fractionating column. Petroleum includes not only crude oil, but all liquid, gaseous and solid hydrocarbons. Our company exports to contries such as Malasia, Singapore, China, Taiwan and all countries in Europe and parts of Africa We'll be glad to have a deal with you.

Modern mineral base oils are the result of a long and complex distillation and refining processes. The feedstock used is crude oil. This substance is not of uniform quality but consists of several thousands of hydrocarbon compounds in which the elements carbon and hydrogen are present in all molecules and, in part, are bound to other elements. The hydrocarbons can be divided into three main groups: paraffinic, naphthenic and aromatic. Paraffinic hydrocarbons can be further divided into two subgroups: normal paraffinic and iso- paraffinic. Paraffinic hydrocarbons are the best lubricants. The distillation process in the refinery separates the hydrocarbons contained in the crude into cuts based on the molecule size. Furthermore, as many unwanted substances as possible are removed in the process, such as sulphur, aromatic hydrocarbons, paraffin wax, etc. In other words the mineral oil production process is physical cleaning and the end product is so-called paraffinic base oil. Most of the hydrocarbons in the base oil are paraffinic, but it also contains naphthenic and aromatic molecules. When the finished lubricant, such as motor oil, is made of these, several additive compounds are used to improve the base oil properties. The final outcome can also be so-called naphthenic base oil, where most of the hydrocarbons are naphthenic. Their cold properties are excellent.

Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F). Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality. Uses of Bitumens Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.