We supply high-quality petroleum products from trusted Middle Eastern, European, and Turkish producers, ensuring compliance with international standards.
Important Notice: Due to widespread fraud in the oil industry, our procedures are non-negotiable. No upfront payment is required. TTM (Table-Top Meeting) can be arranged before LC for qualified buyers with ICPO + POF.
Key Products & Origins:
Diesel (D2, D6) Origin: Middle East
EN590 Origin: Italy, Europe, Turkiye, Middle East
Jet Fuel (Jet A1) Origin: Middle East
Our UAE office is a licensed petroleum exporter, ensuring seamless transactions and full regulatory compliance.
Sales & Purchase Procedure:
Request: Buyer submits Letter of Interest + Proof of Funds (POF) (Bank Statement, BCL, etc.).
Introduction: Seller verifies the buyer and conducts an introductory call.
Capability Assessment: Seller assesses the buyer's financial capacity.
Corporate Offer: Seller issues a Formal Corporate Offer (FCO) with prices, volume, and terms.
Sales Agreement: Buyer & Seller finalize a Sales & Purchase Agreement (SPA). The seller also issues an MFPA (Master Fee Protection Agreement) for agents/mandates.
Banking & Collateral: Buyer submits SBLC MT760, and Seller provides a 2% Performance Bond.
Loading & Documentation: Seller loads the vessel at their own cost and issues delivery documents (B/L, Ullage Report, COO, Q88, etc.).
Delivery & Payment: Buyer conducts a Dip Test, completes an MT103 wire transfer, and receives Title of Ownership upon payment.
We ensure reliable supply, competitive pricing, and seamless transactions for our global buyers.
1)Chemical Characteristic� :� Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for� liquid paraffin, natural paraffin etc.
2)� Properties:� White particle,flake or powder, with good lubricant effect,� chemical durability and good electrical performance, soluble in aromatic hydrocarbon.
Mineral oil, also known as liquid paraffin, is a naturally-derived odorless, colorless oily liquid. This variety of Mineral Oil 70 USP represents the most refined, purest grade with a low viscosity. Mineral oil in cosmetics may help prevent moisture loss and rejuvenate oneâ??s skin due to its natural emollient properties, making this a very common ingredient in topical personal-care products such as ointments, creams, sunscreen and lip care. In additional to personal-care formulations, bulk mineral oil 70 is often used in a wide-range of industrial applications as a lubricant or release agent. Itâ??s used in the rubber, machinery, light textile, petrochemical and pharmaceutical industries. This product has been tested and meets the standards set by the United States Pharmacopeia (USP) for purity and quality.
Specifications
Description
Colorless, transparent, oily liquid, free or practically free from fluorescence. It is odorless and tasteless when cold and develops not more than a faint odor of petroleum when heated.
Solubility
Insoluble in water and in alcohol, soluble in volatile oils. Miscible with most fixed oils but not with castor oil.
Specific Gravity
Between 0.818 and 0.880 0.8255
Acidity/Alkalinity
Not more than 0.1 ml of 0.1 M sodium hydroxide is required.
Viscosity
Not more than 33.5 centistokes (between 11.0 â?? 14.0 cSt).
Neutrality
The alcohol remains neutral to litmus.
Readily carbonisable substance
The oil may turn hazy but should remain colorless, or shows a slight pink or yellow color and the acid should not become darker than the standard solution.
Limit of polynuclear compounds
The absorbance of sample solution at any wavelength in the range 260 to 350 nm should not be more than one third of the absorbance of standard solution at 275 nm.
Solid Paraffin
Conforms
Sulphur Compounds
The mixture remains colorless.
Packing
1829.818 LB per Tote
441 LB Drum, 4 drums per pallet
31781 Petroleum By Products Suppliers
Short on time? Let Petroleum By Products sellers contact you.
Paraffin wax is a white or colorless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. It is solid at room temperature and begins to melt above approximately 37 C (99 F). Common applications for paraffin wax include lubrication, electrical insulation, and candles, wax paper, polishes, cosmetics, and electrical insulators. It assists in extracting perfumes from flowers, forms a base for medical ointments, and supplies a waterproof coating for wood. In wood and paper matches, it helps to ignite the matchstick by supplying an easily vaporized hydrocarbon fuel. Fully refined paraffin wax of which oil content is maximum 0.5% and melting point 60/62 C . semi refined paraffin wax of which oil content is from 1% to 10% and melting point 58/60 , 60/62 or 62/64 C , our paraffin wax colors differ from snow white transparent to cream depending its oil content and being heavy or light grade which is related to the melting point of the raw material used . fully refined paraffin wax is used for cosmetic and food products and semi refined paraffin wax usages is candle making, painting, floor covering.
HS Code : 2901100000
140kgs*80drums/20"GP, 140kgs*160drums/40GP 2. ISO TANK, 15tons
Mainly used as solvent ga-soline, industrial ga-soline components. Other solvents used as solvent for printing ink, diluent for coating solvent, solvent for butyl rubber and olefin polymerization and other organic reactions, used as solvent and chromatographic analysis standard material, also used in organic synthesis.
Powering possibilities with every drop. Our premium fuel is formulated to deliver maximum performance and efficiency for your vehicle or equipment. Engineered with precision and refined for purity, it ignites smoothly, providing the energy needed to keep you moving forward. Whether you\'re commuting, hauling, or adventuring, trust our fuel to optimize your engine\'s performance and reliability, mile after mile.
Soy wax is a vegetable wax made from the oil of soybeans. After harvesting, the beans are cleaned, cracked, de-hulled, and rolled into flakes. The oil is then extracted from the flakes and hydrogenated.
The hydrogenation process converts some of the fatty acids in the oil from unsaturated to saturated. This process dramatically alters the melting point of the oil, making it a solid at room temperature. The leftover bean husks are commonly used as animal feed.
Adding appropriate beeswax can increase the hardness of the finished wax Animal oil and fat extracted from honeycomb nest, granular, good toughness, suitable for
mixing with other waxes, melting point 65 degrees Celsius, can also be used to make difficult silicone mold wax alone.
Naphtha is a flammable liquid made from distilling petroleum. It looks like gasoline. Naphtha is used to dilute heavy oil to help move it through pipelines, to make high-octane gas, to make lighter fluid, and even to clean metal. It is a liquid petroleum product that boils from about 30�??�?�°C (86�??�?�°F) to approximately 200�??�?�°C (392�??�?�°F), although there are different grades of naphtha within this extensive boiling range that have different boiling ranges. The term petroleum solvent is often used synonymously with naphtha. On a chemical basis, naphtha is difficult to define precisely because it can contain varying amounts of its constituents (paraffins, naphthenes, aromatics, and olefins) in different proportions, in addition to the potential isomers of the paraffins that exist in the naphtha boiling range. Naphtha is also represented as having a boiling range and carbon number similar to those of gasoline a precursor to gasoline.
Bulk Quantity
Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.
Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!
Mazut may be used for heating houses in the former USSR and in countries of the Far East that do not have the facilities to blend or break it down into more conventional petro-chemicals. In the West, furnaces that burn mazut are commonly called "waste oil" heaters or "waste oil" furnaces.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75 (not active), GOST 10585-99 Oil fuel. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. This product is typically used for larger boilers in producing steam since the energy value is high. The most important factor when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil (Bunker C), and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
Best Price
Jet Fuel A1 is a specialized type of kerosene designed for use in aircraft powered by gas-turbine engines. It meets stringent international specifications, ensuring optimal performance and safety for aviation applications.
Primary Characteristics:
Appearance: Clear to straw-colored liquid.
Odor: Characteristic petroleum or kerosene odor.
Density: Typically around 0.80 kg/l at 15 C.
Flash Point: Minimum of 38 C (100 F).
Freezing Point: Maximum of -47 C (-53 F).
Specifications:
Jet Fuel A1 adheres to the stringent international standards set by organizations like ASTM (American Society for Testing and Materials) and DEF STAN (UK's Defence Standard).
We sell Oil and Gas Products
Wholesale Eastern Siberia-pacific ocean oil ( espo) Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6 We are an oil and gas company Agents, Facilitators and Mandate; we source crude oil for Refineries and large volume buyers, and other petrochemicals like AGO, LPFO, PMS, DPK and other Russia product origin listed below for the upstream and downstream sectors consumption.
Brand Name OEM
Model Number paraffin wax
Forms Solid
Oil Content (%) 0.5
Crystalline Index Crystal
Scale of Deoiling #
Product name Top Grade Granular Paraffin Wax
Usage Candle Macking
Package 25KG/CTN 50KG/BAG
Certificate COA/TDS/MSDS/ISO9001
Storage Cold Dry Place
MOQ 25MT
OEM Accept
Brand Name tr-08
Model Number 08
Forms Solid
Oil Content (%) 0.5
Crystalline Index Crystal
Scale of Deoiling Commercial
Product name Paraffin Wax
Grade Industrial Grade
Package 25KG/CTN 50KG/BAG
Sample Provide Free samples
MOQ 1 Ton
Usage Candle Macking
Place of Origin Netherlands
Brand Name OEM
Model Number paraffin wax
Forms Solid
Oil Content (%) 0.5
Crystalline Index Crystal
Scale of Deoiling #
Product name Top Grade Granular Paraffin Wax
Usage Candle Macking
Package 25KG/CTN 50KG/BAG
Certificate COA/TDS/MSDS/ISO9001
Storage Cold Dry Place
MOQ 25MT
OEM Accept
The purpose of this document is to provide instructions for the use of TC200A an oilsoluble ultrahigh alkali
magnesium additive specifically designed to inhibit vanadium in ashforming crude and residual fuels for gas
turbines
TC200A additive is a turbinequality oilsoluble organomagnesium fuel additive prepared by reacting high
purity magnesium compounds with carboxylic acid It possesses excellent physical and chemical properties and
is proprietary in its formulation The additive can be easily dissolved in heavy fuel oil in any proportion
The primary function of TC200A additive is to supply available MgO which reacts with V2O5 present in heavy
fuel oil forming a highmeltingpoint vanadium magnesium compound through chemical combination This
compound effectively inhibits vanadium corrosion and results in the formation of dispersed ash that is carried
away with the turbine exhaust gas
The recommended dosage of TC200A additive in heavy fuel oil is around 3 to 35 MgV3 to 35 or as per the
instructions provided by the gas turbine manufacturer When calculating the additive dosage the nickel content
in the heavy fuel oil must be considered along with vanadium
TC200A additive is manufactured in strict accordance with GE standard GEK28150B It exhibits stability to
hydrolysis is oilsoluble nonvolatile and harmless The additive is suitable for use in heavyduty gas turbines
employed in industrial marine and utility applications
Additive Type Oil Soluble and oil spersed
Magnesium content 20
Physical appearance Brown or black viscous liquid
Density 120125gml 20
Viscosity 60mm2s 40
Flash Point 65
Pour Point 20
NaK 50mgKg
Ca 500mgKg
Pb 5mgKg
V 5mgKg
31781 Petroleum By Products Suppliers
Short on time? Let Petroleum By Products sellers contact you.
