Petroleum By Products Suppliers and Manufacturers

Oil and Gas Related Plants

Liquefied natural Gas Liquefied petroleum Gas

Commodity : LPG ( Liquefied Petroleum Gas) Origin : Oman Or Gulf Gas MOQ : 44,000 MT minimum quantity monthly for bulk and ISO tank Contract : 12 months Rolls Extensions Port Of destination : CIF AWSP Inspection : SGS OR similar Payment Terms : Unconditional SBLC= MT 103 in 2 days/ payment against Q&Q inspection by buyer at destination port Price : LPG CP ARAMCO Platts minus 10$ Packing : bulk Delivery time : 30 days conditions / Notes : Buyer must warrant that they have the necessary IMPORT permit / quota and storage facilities at discharge port

Hello Sir/Mam Thanks for the interest in our Crude oil product We are able to supply you on a consistent basis Origin Available 1 Iran 2 Kazakhstan Payment Terms DLC SBLC BG Sblc via MT760 TT MT103 Specification of Iran light crude oil certificate of origin changeable CHARACTERISTICS UNITS RESULT TEST METHOD Specific Gravity1556 1556 08568 ASTM D5002 API Gravity API 336 ASTM D5002 Sulfur Content total Wt 146 ASTM D4294 HS Content ppm 86 IP 570 Mercaptan Content ppm 60 UOP 163 Nitrogen Content total Wt 0l3 ASTM D5762 Water Sediment Vol

Base oils are important basic raw materials for any lubricants included engine oils, gear oils, industrial oils, metal working fluids, hydraulic fluids and also greases. In most of the lubricants 70-90% ingredient is base oils. As per API classification Base oils can be grouped majorly into five groups, i.e., Group-I/II/III/IV/V. The base oil characteristics are very important in determining the quality of the finished product. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.

Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.

Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base Oil SN 500 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

Base oil SN 150 is known as a light grade base oil at the lower end of the specifications for Grade I light base oils. It is mostly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base oil SN 150 works as a base stock for several industrial lubricants. General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils

Bitumen penetration grade 40/50 bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 40 to 50. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and a basic material for all other bituminous products. Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.

VG10 bitumen is the softest grade of viscosity bitumen. This type of bitumen is widely used for spraying applications and surface coating. VG 10 bitumen means that your bitumen is also suitable for paving roads in a very cold climate instead of the old 80/100 penetration grade. The air temperature that matches VG10 bitumen ranges from -10 �¢?�¦C to 25 �¢?�¦C. Due to the high temperatures in hot climatic zones, the application of VG10 cannot provide desirable rutting resistance. This type of bitumen is also used to manufacture bitumen emulsions and modified bitumen products especially in India. As a viscosity grade bitumen, VG10 has a better performance incold weather. To know vg10 latest price contact us.

VG-20 bitumen is a grade of viscosity bitumen used in cold climatic and high altitude regions. This grade of bitumen is suitable for road construction in regions with 30 to 37 C average temperature. In North India, vg20 is used for road construction in hot mix asphalt. The standard penetration value of bitumen viscosity grade VG-20 is 60 mm at 25 C. The absolute viscosity of VG-20 bitumen is 1600 to 2400 poise at 60 C.

This bitumen is primarily used for the construction of extra-heavy bitumen pavements that have to bear significant traffic loads. Bitumen VG30 is the most widely used type of bitumen in road construction, insulation, building construction industries, and also in the production of cutback bitumen. it is better to know that this vg30 bitumen can be used instead of 60/70 penetration bitumen grade.

VG40 bitumen is used in areas in which high pressure comes from heavy traffic loads, such as intersections, near tolls booths, and truck parking lots. Due to the high viscosity of this bitumen, it is more appropriate for improving resistance to shoving and other problems associated with higher temperatures and heavy traffic loads. It's long time that industries use vg-40 instead of the penetration grade bitumen 40/50.

SPIN 12 is a highly refined mineral oil for use in the processing of natural and artificial fibres in the textile industry. APPLICATION SPIN 1 2 can be applied as spray or roll-on to the fibres o minimize friction in the drafting, ca.rding, twisting and weaving of the textile fabric. BENEFITS The low viscosity of the oil ensures easy application and penetration into the fibre. Protects and extends machine life through lubrication. Ensures clear, clear, non-staining and efficient processing.

Transformer Oil is highly purified non-inhibited high performance mineral oil of Class 1 category of electrical insulation oils, confirming to IS 335:1993 It is use to insulate and cool transformer coil and to quench�  electric�  arcs�  that�  form between�  contacts�  of�  switchgears,�  circuit�  breakers�  and�  rheostats�  using�  mineral insulating oil. BENEFITS High insulating capacity. Effective cooling and heat dissipation due to low viscosity. Minimum risk of fire due to very high flash point. High demtilsibility to ensure good separation of water in case of accidental pollution. No impurities e.g. water, dissolved gases suspended solids, etc.. Excellent oxidation stability. Minimum consumption of product due to low volatility at operating temperatures.

Multisynth 20W40 is a superior quality multigrade oil blended with superior quality high Viscosity Index base oils and contains well balanced group of additives to provide high detergency, dispersancy and anti-oxidant characteristics. APPLICATION Recommended for both petrol and diesel engines that are naturally aspirated and light commercial vehicles under normal operating conditions. BENEFITS High Viscosity Index which keeps it free-flowing when cold and maintains high viscosity when hot. High detergency and dispersion properties offer improved engine cleanliness. Reduced friction and wear. Effective resistance to block sludge and deposit formation. Excellent resistance to oxidation and corrosion.

COMPRESSOR on. Blended from refined based stocks with Antioxidant and Rust Inhibitor to provide satisfactory lubrication under high temperature and high load conditions. APPLICATION Acts as a barrier against contaminants, preventing them from entering the compressor and causing damage. BENEFITS Improved compressor performance and efficiency. Enhanced ec{uipment reliability and durabi1ityâ?¢. Reduced maintenance costs and downtime. Lower energy consumption. Protection against rust, corrosion, and excessive wear.