Anode Carbon Block Baked Carbon , Pre- Baked Carbon ScrapBaked Carbon , Pre- Baked Carbon Scrap Anode Scrap is waste product of raw anode. The raw Carbon Anode products after vibration forming shall be inspected one by one according to the appearance inspection standard of raw anode, and the formed blocks that do not meet the appearance inspection standard of raw anode shall be picked out, including cracks, pitted surface, curved surface, bending, deformation and man-made waste products. So we called it , carbon anode scrap . Anode scrap , Anode carbon block . Crushed Anode carbon block . etc.... Carbon block - residual carbon block is the preferred fuel to replace cast Not the furnace! Smoke free Less ash High heat Tywin, come on Supply various specifications of residual anode carbon block | anode carbon block | residual carbon block | waste anode block Carbon/Graphite Anode Scrap
pre-baked consumable Carbon Anode made from petroleum , and coal tar pitch,through mixing,forming and baking processes,be used as anodes in cells of Primary Aluminum Smelter. Pre-baked Carbon Anodes Produced by Carbon has the property of lower Ash content Lower Sulfur content,and Higher Compress strength. CO2 Reactivity Residue can reach above 91%, and Air Reactivity can reach above 96%; the life-span in cells of aluminum electrolysis is 30-33days, with s anodes the carbon consumption required for producing one-ton primary aluminum will reduce by about 30Kg than using Pre-baked Carbon Anodes produced by other suppliers. Higher thermal shock Resistance;Thermal Exposure:
size:1.5mm/2.0mm/3.0mm/4.0mm/5mm/6mm/8mm etc Iodine value:800-1200mg/g
Apricot shell activated carbon/ Peach shell activated carbon 4-8, 6-12, 8-16, 8-30, 40-60mesh, etc
Apricot shell activated carbon/ Peach shell activated carbon 4-8, 6-12, 8-16, 8-30, 40-60mesh, etc
Type: Coconut shell activated carbon Mesh: 4x8, 8x16, 8x30 mesh Iodine Number (AWWA B 600-78): 900-1200 mg/g Application: Drinking Water purification, process water and condensate stream purification, wastewater treatment, chemical purification, food stuff purification
100*100*100mm 100*100*50mm Bore diameter(1.5mm,3mm,5mm, 8mm )
It used in the field of gas phaseadsorption, recovery of organic solvents such as alcohol, ester, hydrocarbonand aromatic. It used for airfiltration, purification and removal of harmful gases. Mainly used for air purifier,gas mask, operating room, chemical medicine workshop, purification of hotelrooms and organic solvent recovery. Widely used in thepurification and deodorization for the drinking water, in the further (deep)treatment to the toxicity, COD, BOD, Cdonbacillus, etc for the industrialwastewater and municipal wastewater, in the ultra water purification for theelectronic & pharmaceutical industries. Coal granular activated carbon, specifications (4x8 mesh, 5x10 mesh, 8x16 mesh, 8x30 mesh, 12x40 mesh,30x60mesh) Powder 200-325 mesh Main index : iodine value :600-1000mg/g; Moisture: less than 10%; Strength: more than 95%. Chengde JisenCarbon Industry Company has an ISO 9001 certificate. We only do the activatedcarbons which are 100% according to the specifications or customers' detailrequest. As for packaging, generally it is 25 KG PP BAGS or 500 KG PP BAGS.
Product Information: 3K/6K/12K two-way carbon fiber cloth is made of raw material 3K/6K/12K carbon fiber silk, plain weave or twill weave. It has the characteristics of high strength, high modulus, light texture, corrosion resistance and high temperature resistance. Product Specifications 3K-P180: 180g/m2, 0.25mm, 100-3200mm Width, Plain; 3K-P200: 200g/m2, 0.26mm, 100-3200mm Width, Plain; 3K-P220: 220g/m2, 0.3mm, 100-3200mm Width, Plain; 3K-P240: 240g/m2, 0.32mm, 100-3200mm Width, Plain; 3K-P280: 280g/m2, 0.34mm, 100-3200mm Width, Plain; 3K-T200: 200g/m2, 0.26mm, 100-3200mm Width, Twill; 3K-T220: 220g/m2, 0.3mm, 100-3200mm Width, Twill; 3K-T240: 240g/m2, 0.32mm, 100-3200mm Width, Twill; 3K-T280: 280g/m2, 0.34mm, 100-3200mm Width, Twill; 6K-P280: 280g/m2, 0.36mm, 100-3200mm Width, Plain; 6K-P320: 320g/m2, 0.38mm, 100-3200mm Width, Plain; 6K-P360: 360g/m2, 0.42mm, 100-3200mm Width, Plain; 6K-P400: 400g/m2, 0.48mm, 100-3200mm Width, Plain; 6K-T280: 280g/m2, 0.36mm, 100-3200mm Width, Twill; 6K-T320: 320g/m2, 0.38mm, 100-3200mm Width, Twill; 6K-T360: 360g/m2, 0.42mm, 100-3200mm Width, Twill; 6K-T400: 400g/m2, 0.48mm, 100-3200mm Width, Twill; 12K-P400: 400g/m2, 0.46mm, 100-3200mm Width, Plain; 12K-P480: 480g/m2, 0.52mm, 100-3200mm Width, Plain; 12K-P560: 560g/m2, 0.58mm, 100-3200mm Width, Plain; 12K-T400: 400g/m2, 0.46mm, 100-3200mm Width, Twill; 12K-T480: 480g/m2, 0.52mm, 100-3200mm Width, Twill; 12K-T560: 560g/m2, 0.58mm, 100-3200mm Width, Twill; Product Features: 1.High strength 2.Light texture 3.Preservative 4.High temperature resistance Applications: 1.Sports and leisure products: surfboards, water skis, snowboards, paddles, bicycles, sports shoes, fishing rods, rackets, fitness equipment, protective equipment, etc.; 2.Automobile and motorcycle parts: Appearance parts such as automobile surrounds, hoods, lamp eyebrows, grilles, etc., interior parts such as center consoles, gear shifters, steering wheel pedals, etc., motorcycle exhaust pipes, safety helmets, fenders, etc.; 3.Industrial products: engine parts, transmission shafts, pressure vessels, scrapers, computer and other electrical shell parts, protective shells, fire protection equipment, etc.; 4.Medical supplies: medical CT bed boards, prosthetics, brackets, etc.; 5.High-end daily necessities: bags, musical instruments, pen tubes, craft decorations, models, etc.; Packaging Information: Carbon fiber fabric is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets.
We can supply Activated Carbon as follows: Aquanomics unwashed carbons are manufactured under the strict supervision of our skilled and experienced experts. The unwashed carbon has high and effective diffusion properties with a high degree of microporosity. These carbons have a wide application in the liquid phase application and are used for removing undesired color, smell and other impurities. Aquanomics Unwashed Carbons comes in black powdered form. Aquanomics Granular Carbon is used for water treatment including drinking water, groundwater, service water, wastewater, deodorization and separation of components of flow systems. Aquanomics Granular Carbon has a larger particle size as compared to powdered activated carbon. These granular carbon are preferred for the absorption of gases and vapors as well since their rate of diffusion is faster. Aquanomics Washed Carbons is a cost-effective means of maintaining the activity of activated carbons. This washed carbon is manufactured by our experienced proficiency, ensuring effective, unhampered and prolonged application. It is used in aqua applications like swimming pool purification, etc and also in the containment of food and beverages, water purification and pharmaceutical applications
Activated Carbon
Pigment carbon black: C111 C121 C311 C321 C611 F311 F315 F615 HCS-200R HCS-300R HCS-650R HCS-1 HCS-2 HCS-3 HCS-4 TY-1 TY-2 TY-3 TY-5 TY900 HCS-1355 HCS-1155 HCS-1655 Rubber carbon black: Brand/Grade N110 N115 N120 N121 N125 N134 N135 N219 N220 N231 N234 N293 N299 N326 N330 N335 N339 N343 N347 N351 N356 N358 N375 N539 N550 N582 N660 N683 N754 N762 N765 N772 N774 N787 N990 N991 Conductive black: Super P, HCY-70 HCY-80 HCY-90 HCD 1-6 Acetylene black : Powder 50% Compression Product 75% Compression Product 100% Compression Product
We are Adam Carbons LTD (formerly Beico Link) who are one of Sri Lanka's oldest manufacturers of Coconut shell charcoal and Coconut Shell Activated Carbon since 1987. We produce coconut shell charcoal and steam processed granular activated carbon solely from Sri Lankan Coconut Shell Charcoal using a 100% green and pollution free process, leaving a near zero carbon footprint. Our green process uses recycled waste, produces renewable biomass energy from the waste-heat generated during the process, and eliminates pollution to produce Activated Carbon of the highest quality which is environmentally friendly. Specification of Coconut shell charcoal Dust < 3% Moisture < 15% Non- Carbon < 1% Packing: 25KG pp bags (Without marking)
SIZE:100-600mm 30-80mm 1-6mm CARBON CONTENT: 95-97% SULPHUR: 2.0% MOISTRURE: NO MORE THAN 2%, IN BULK HS CODE:3801... Country of Origin : middle East Malaysia China
Powdered Activated Carbon Powdered activated carbon (PAC) is a fine black powder that is produced by heating carbon-rich materials, such as coal, wood, or coconut shells, in the absence of air to create activated carbon. PAC is widely used in various applications, including water treatment, air purification, gas processing, and industrial processes. In water treatment, PAC is added to the water to remove organic contaminants, such as pesticides, solvents, and pharmaceuticals, as well as taste and odor-causing compounds. The PAC particles attract and adsorb these contaminants, effectively removing them from the water. PAC is also used in wastewater treatment to remove dissolved organic compounds and color from the wastewater. In air purification, PAC is used to remove pollutants, such as volatile organic compounds (VOCs), from the air. The PAC particles adsorb these pollutants, effectively reducing their concentration in the air.
Product Description Granular Activated Charcoal Granular Activated Charcoal (GAC) is a highly porous form of activated carbon that is used in a wide range of applications, including water and air purification, gas and vapor adsorption, and chemical and pharmaceutical processing. It is produced by heating carbon-rich materials, such as coconut shells or wood, in the absence of air, which creates a highly porous material with a large surface area. The surface area of GAC can range from 500 to 1500 square meters per gram, depending on the specific production process and the pore size distribution. This high surface area and porosity give GAC excellent adsorption properties, allowing it to attract and retain a wide range of organic and inorganic compounds. GAC is commonly used in water treatment applications, where it is used to remove impurities such as chlorine, volatile organic compounds (VOCs), pesticides, and other organic contaminants. It can also be used to remove odors and flavors from water.
Product Description Honeycomb Activated Carbon Honeycomb activated carbon is a type of activated carbon that is structured in a honeycomb shape. It is commonly used in air and water purification due to its high surface area and pore volume, which allows it to effectively adsorb impurities and pollutants. The honeycomb structure also provides excellent flow characteristics, making it ideal for use in filtration systems. https://www.recarburizers.com/products/coal-based-honeycomb-activated.html Features Honeycomb activated carbon is a type of activated carbon that has a unique honeycomb-like structure, with a high surface area and porosity. Its features include: High surface area: Honeycomb activated carbon has a high surface area that allows it to adsorb a wide range of impurities. Low pressure drop: Its unique structure provides low pressure drop, which makes it ideal for applications with high flow rates. High adsorption capacity: Honeycomb activated carbon has a high adsorption capacity for a wide range of contaminants, including volatile organic compounds (VOCs), odors, and gases. Regenerable: It can be regenerated by heating it to high temperatures and reused, making it a cost-effective option. Some common applications of honeycomb activated carbon include: Air purification: It can be used to remove VOCs, odors, and other air pollutants from indoor and outdoor environments. Water treatment: It can be used for the removal of organic and inorganic contaminants, as well as taste and odor control in drinking water. Gas purification: It can be used to purify gases, such as natural gas and biogas. Catalyst support: It can be used as a support material for catalysts in chemical and petrochemical processes.
Virgin coconut shell activated carbon mesh size 40 x 325, iodine 1000 min, moisture 8% max and ash 10% max for AC filter block maker. Feel free to contact us if you keen on this product offer
We're Coconut shell activated carbon manufacturers from india with different variants of activated carbon
Carbon black is a material produced by the incomplete combustion of coal and coal tar, vegetable matter, or petroleum products, including fuel oil, fluid catalytic cracking tar, and ethylene cracking. Carbon black is a form of paracrystalline carbon that has a high surface-area-to-volume ratio, albeit lower than that of activated carbon. It has high reinforcement property, small deformation, low calorification, good elasticity and flex stiffness characteristics. N110: High reinforcing, super abrasion N115: High reinforcing, super abrasion N121: High reinforcing, super abrasion, high modulus N134: High reinforcing N219: High reinforcing, low modulus, good elongation and resistance to tearing, good flex resistance N220: High reinforcing, high tear resistance, good processing N375: medium-high reinforcing, high modules and hardness, smooth surface of extrusion N539: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion N550: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion N660: medium-high reinforcing and modulus, good flex resistance, low heat buildup N762: low reinforcing N774: semi-reinforcing, good elongation, high resilience, low compressed deformation N234: High reinforcing, high abrasion, high modulus, good dispersion N326: Medium-high reinforcing, low modules, good elongation and resistance to tearing, good flex resistance N330: medium-high reinforcing and modulus, good processing N339: medium-high reinforcing, high modulus and hardness, good processing N347: medium-high reinforcing, high modulus and hardness, good processing N351: medium-high reinforcing, high modulus and hardness, good processing Applicationï¼? Carbon black is mainly used as reinforcing filler in tyres and other rubber products during the vulcanization process to improve the tensile strength and wear resistance of styrene-butadiene, such as rubber conveyor belts, rubber hose, Airsprings and other rubber products. Packing: 20kg/package: 1MT/Pallet 1000kg/package: 1MT/Pallet Or customized
