Carbon
Supplying Carbon Black! The most common carbon black use (70%) is as a pigment and reinforcing phase in automobile tires. Carbon black also helps conduct heat away from the tread and belt area of the tire, reducing thermal damage and increasing tire life. About 20% of world production goes into belts, hoses, and other non-tire rubber goods. The balance is mainly used as a pigment in inks, coatings and plastics. We can propose a suitable offer for #carbonblack based on your needs.
Carbon Vegetal
We use the elaborately selected the low-ash and low-sulfur coal as raw material. Advanced grinding and remodeling are adopted to the process, to make sure the product has higher strength and activity. Besides, our unique steam and activization is utilized in the process, so that it have a high specific surface area and optimized pore size, which can absorb color molecules and odor-producing molecules in the solution.
We are manufacturer of Activated Carbon. Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Our Activated carbon are coconut shell based with high iodine value. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Activated Carbon is used worldwide in purification of Water, Air, etc.
We are the seller of anode carbon scrap/foundry coke in India Malaysia Singapore China Bangladesh Thailand Vietnam Italy Germany France. We have the best quality of Carbon Anode scrap. origin: middle east
Black Carbon gcv 2000
Our Activated Carbon Powder is of Chinese origin. We can supply carbon with various iodine and methylene blue values. The advertised price is for carbon of the following value. MOQ: 25 Metric Tonne Iodine value:300mg/g Size:200 mesh Moisture 10% Methylene Blue Value:40 mg/g The following products are available as well with the listed price FOB 1100USD Iodine value:500mg/g Size:200 mesh Moisture 5% Methylene Blue Value:70 mg/g 1300USD Iodine value:700mg/g Size:200 mesh Moisture 5% Methylene Blue Value:120 mg/g 2600USD Iodine value:900mg/g Size:200 mesh Moisture 5% Methylene Blue Value:150 mg/g
High quality carbon anode scrap for sale: FC: 98%, Sulfur: 2.5%, Ash: 1%, VM: 1%, Moisture: 1%, Size: 10-30mm, 30-80mm, 60-90mm, 80-150mm, 100-200mm, 100-350mm, 200-400mm or as customer's requirements.
The adsorptive capacity of granular activated carbon (GAC) makes it ideal for removing a variety of contaminants from water, air, liquids and gases. GAC is also an environmentally responsible product that can be reactivated through thermal oxidation and used multiple times for the same application.
Powdered activated carbons (PAC) are defined by the ASTM as particles passing through an 80-mesh sieve (0.177 mm) and smaller. We manufactures many types of powdered activated carbon products, each specifically engineered to provide a unique pore structure and adsorption properties.
Carbon block
Function:Anti-slip, Anti-Static, acid-resistant, alkali-resistant Place of Origin:Guangdong, China Model Number:EGT01 Style:ESD Top PU Gloves Material:Polyester + carbon fiber + PU glue Size:S/ M/ L Color:Gray(Carbon fiber) Wrist:Hot melt or Overlock Knitting:13 gauge Feature:Anti-static Certification:other
Carbon Black N990, here in , and exporting to worldwide. Feel free to contact to get our offer.
Globular activated carbon of its body structure to contain at least one layer of spherical shell made of activated carbon material, spherical shell is spherical core body, can be made of different in spherical shell material of inorganic materials, spherical shell can be up to 10 mm in diameter. Change the traditional with binder forming old technology. Excluding adhesive composition and completely on carbon molecules between the affinity and the special properties of the material itself. Produced by scientific formula. Effectively avoid the pore structure plugging, pore developed products, powerful. In addition, because the fluid flow channel formed between globular activated carbon fluid mechanics performance is good, the fluid pressure drop through the activated carbon layer is small, so it is especially applicable to in activated carbon bed layer stack height of fixed bed gas processing plant. Globular activated carbon adsorption performance is divided into physical adsorption and chemical adsorption. Physical adsorption is caused by activated carbon is porous, so has the huge specific surface area, it has strong adsorption. Globular activated carbon surface can be as high as 500-1000 m2 / g, is conducive to give full play to the performance, the distributed capacitance is generally about 0.25 ~ 0.9 ml/g, BET specific surface area is about 500 ~ 2000 m2 / g.
Deep purification of drinking water,industrial sewage water;used for atomic facilities such as exhaust purification, division and refinig. Specification:Iodine value,800~1100mg/g,Moisture 5%,Hardness90%,PH6-8/9-11,ash15%,200mesh/8*16mesh/12*40mesh/1-3mm
The use of carburizer in casting can greatly increase the amount of scrap steel, reduce the amount of pig iron, or use no pig iron. The feeding method of furnace smelting should be put into the furnace with waste steel and other materials, and the small dosage can be added to the surface of the molten iron. However, it is important to avoid large quantities of iron and water in order to prevent excessive oxidative effects and insufficient carbon content of casting. The amount of carbon added is determined according to the ratio of other raw materials and carbon content. Different types of cast iron are selected according to the need to choose different types of carbon. The characteristics of the carburizing agent itself choose pure carbon graphitized material, reduce the impurities in pig iron, and the choice of carbon addition agent can reduce the production cost of the casting. In the process of smelting, the carbon content in the steel can be added to the molten steel, due to the improper loading or loading and the excessive amount of decarburization. The commonly used additive is carbon iron, electrode powder, petroleum coke powder, charcoal powder and coke powder. In converter smelting and high carbon steel, the use of petroleum coke with few impurities is used as a carbon extender. The requirement for the carbon dioxide of the converter steelmaking is high, the ash, volatile and sulfur, phosphorus, nitrogen and other impurities are low, and dry, clean, the particle size is moderate
Origin:-China Uses:- N330 carbon black is used as reinforcing filler in tire tread compounds, primarily truck tires, mechanical rubber goods. Offers very good abrasion resistance. Provides good tear resistance and high tensile strength.
Origin:-China Uses:- N330 carbon black is used as reinforcing filler in tire tread compounds, primarily truck tires, mechanical rubber goods. Offers very good abrasion resistance. Provides good tear resistance and high tensile strength.
Testing item Range Result Standard Iodine Absorption Number (g/kg) 82±5 80 GB3778-2011 Oil Absorption Number(10-5m3/kg) 102±5 99 GB3778-2011 Crushed OAN(COAN) (10-5m3/kg) 88�±5 91 GB3778-2011 Tint Test, Reflectance From ITRB 3# (%) 104�±8 100 GB3778-2011 NSA multipoint(103m2/kg) 78±5 81 GB3778-2011 STSA (103m2/kg) 75±5 72 GB3778-2011 Heating Loss/Moisture (%) 1.0 0.2 GB3778-2011 Ash Content (%) 0.5 0.2 GB3778-2011 500m Sieve Residue (mg/kg) 10 6.5 GB3778-2011 45m Sieve Residue (mg/kg) 500 332.0 GB3778-2011 Pour Density (kg/m3) 380±40 421.0 GB3778-2011 Stress at 300% Elongation (Mpa) -0.5±1.0 0.5 GB3778-2011 Fine Content(Jumbo Bag) (%) 7.0 4.3 GB3778-2011 Fine Content(Paper Bag) (%) 10 5.0 GB3778-2011
