Selecting low ash low sulphur bituminous ,adopting agglomeration process and well-controlled steam activation. The activated carbons display good hardness and high internal surface area , thus effectively adsorb the organic pollutants with large and small molecules and remove the taste and odor compounds and bear repeated backwashing and resist the abrasion.
The granular activated carbons functioned as both filtration and adsorption mainly treat the surface and ground water source and produce the clean drinking water.
The most common carbon black use (70%) is as a pigment and reinforcing phase in automobile tires. Carbon black also helps conduct heat away from the tread and belt area of the tire, reducing thermal damage and increasing tire life. About 20% of world production goes into belts, hoses, and other non-tire rubber goods. The balance is mainly used as a pigment in inks, coatings and plastics.
We can propose a suitable offer for #carbonblack based on your needs.
We use the elaborately selected the low-ash and low-sulfur coal as raw material. Advanced grinding and remodeling are adopted to the process, to make sure the product has higher strength and activity. Besides, our unique steam and activization is utilized in the process, so that it have a high specific surface area and optimized pore size, which can absorb color molecules and odor-producing molecules in the solution.
We are manufacturer of Activated Carbon. Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Our Activated carbon are coconut shell based with high iodine value. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Activated Carbon is used worldwide in purification of Water, Air, etc.
We are the seller of anode carbon scrap/foundry coke in India Malaysia Singapore China Bangladesh Thailand Vietnam Italy Germany France. We have the best quality of Carbon Anode scrap.
origin: middle east
Our Activated Carbon Powder is of Chinese origin. We can supply carbon with various iodine and methylene blue values. The advertised price is for carbon of the following value.
MOQ: 25 Metric Tonne
Iodine value:300mg/g
Size:200 mesh
Moisture 10%
Methylene Blue Value:40 mg/g
The following products are available as well with the listed price FOB
1100USD
Iodine value:500mg/g
Size:200 mesh
Moisture 5%
Methylene Blue Value:70 mg/g
The adsorptive capacity of granular activated carbon (GAC) makes it ideal for removing a variety of contaminants from water, air, liquids and gases. GAC is also an environmentally responsible product that can be reactivated through thermal oxidation and used multiple times for the same application.
Powdered activated carbons (PAC) are defined by the ASTM as particles passing through an 80-mesh sieve (0.177 mm) and smaller. We manufactures many types of powdered activated carbon products, each specifically engineered to provide a unique pore structure and adsorption properties.
Globular activated carbon of its body structure to contain at least one layer of spherical shell made of activated carbon material, spherical shell is spherical core body, can be made of different in spherical shell material of inorganic materials, spherical shell can be up to 10 mm in diameter. Change the traditional with binder forming old technology. Excluding adhesive composition and completely on carbon molecules between the affinity and the special properties of the material itself. Produced by scientific formula. Effectively avoid the pore structure plugging, pore developed products, powerful. In addition, because the fluid flow channel formed between globular activated carbon fluid mechanics performance is good, the fluid pressure drop through the activated carbon layer is small, so it is especially applicable to in activated carbon bed layer stack height of fixed bed gas processing plant. Globular activated carbon adsorption performance is divided into physical adsorption and chemical adsorption. Physical adsorption is caused by activated carbon is porous, so has the huge specific surface area, it has strong adsorption. Globular activated carbon surface can be as high as 500-1000 m2 / g, is conducive to give full play to the performance, the distributed capacitance is generally about 0.25 ~ 0.9 ml/g, BET specific surface area is about 500 ~ 2000 m2 / g.
Deep purification of drinking water,industrial sewage water;used for atomic facilities such as exhaust purification, division and refinig.
Specification:Iodine value,800~1100mg/g,Moisture 5%,Hardness90%,PH6-8/9-11,ash15%,200mesh/8*16mesh/12*40mesh/1-3mm
The use of carburizer in casting can greatly increase the amount of scrap steel, reduce the amount of pig iron, or use no pig iron. The feeding method of furnace smelting should be put into the furnace with waste steel and other materials, and the small dosage can be added to the surface of the molten iron. However, it is important to avoid large quantities of iron and water in order to prevent excessive oxidative effects and insufficient carbon content of casting. The amount of carbon added is determined according to the ratio of other raw materials and carbon content. Different types of cast iron are selected according to the need to choose different types of carbon. The characteristics of the carburizing agent itself choose pure carbon graphitized material, reduce the impurities in pig iron, and the choice of carbon addition agent can reduce the production cost of the casting.
In the process of smelting, the carbon content in the steel can be added to the molten steel, due to the improper loading or loading and the excessive amount of decarburization. The commonly used additive is carbon iron, electrode powder, petroleum coke powder, charcoal powder and coke powder. In converter smelting and high carbon steel, the use of petroleum coke with few impurities is used as a carbon extender. The requirement for the carbon dioxide of the converter steelmaking is high, the ash, volatile and sulfur, phosphorus, nitrogen and other impurities are low, and dry, clean, the particle size is moderate
Origin:-China
Uses:- N330 carbon black is used as reinforcing filler in tire tread compounds, primarily truck
tires, mechanical rubber goods. Offers very good abrasion resistance. Provides good tear
resistance and high tensile strength.
Origin:-China
Uses:- N330 carbon black is used as reinforcing filler in tire tread compounds, primarily truck
tires, mechanical rubber goods. Offers very good abrasion resistance. Provides good tear
resistance and high tensile strength.
