We manufacture paper coversion machinery such as paper cover making machine, paper bag making machine, paper cup machine.
A. As for the fluting type which can be connected with e-b-c-a-f-g flute, we also can make any type of the flute and cut-off size for the machine that customer required. B. Upper and lower corrugated roller, pressure roller, pre-heater roller are through by air cylinder. Set up steam recovery system. C. Oil immersed type gear box driven directs the lower fluting roller, pressure roller, glue roller and doctor roller performed by steam. Single drive mechanism to avoid glue sticking to roll surface when stopping. D. The motion of the upper corrugated roller, pressure roller and glue roller are operated by the hydraulic cylinder. Set up a hydraulic unit control. E.Designed by fingerless with a vacuum blower by positive pressure to keep fluting profile then glue. F. The single facer to use cassette quick change flute profile and change cassette within 20 minutes, the steam joints and drive clutch also adopted quick change device in order to saving the time to change flute and machine stop. Price, delivery time, moq are negotiable, please contact us for quotation.
A. The orders changed of size fastest in approximately 3-7 seconds to get pre-setting position. And provide 99 memories pre-setting for order change at any time also accommodatingly in the production management system. B. The machine has installed precision liner slides and ball screw bearing with encoder to get accurate position. The precision allowance within 0.5 mm to adapt of accuracy requirement various processing factories. C. The upper scoring wheels is single convex type. It can be replaced destruction wheels to used. The upper and lower scoring wheel has equipped 3 types: convex to convex, convex to concave and convex to flat . Selected by switch button. Operate easily. D. Front scoring units affirmed to rear scoring units, the scoring distance of board to achieve the random size. E. The round razor type slitting knives. It can slit cardboard orderly and pretty. The minimum slitting edge is 3~5mm. F. Automatically grind and lubricate without removing slitting knives and extended the life of knives. G. Lubricant device is fixed by level feeding system which volume control very accurately and no waste even no any pollution to the board and environment Price, delivery time, moq are negotiable, please contact us for quotation.
Automatic horizontal baling press tb-070840 has 35 or 50 tons pressing force and 3.5~4.5 tons per hour capacity with 40hp(30kw)motor and 150(or 180)mm ram cylinder. It's suitable for scrap materials like smaller paperboards, trimmed papers or plastic films. There is a door opening in the middle of the machine to be fed the waste materials. It can be customized according to the user's requirement. Customers can choose the convenient way of feeding from air cyclone, conveyor or manual.Tb-070840 is very functional and useful for recycling collectors and paper manufacturers especially with lower capacity demand and small scale. We had designed a hopper in the middle of the machine to be fed the waste materials. It can be customized with different demand. So users can choose the way of feeding from air cyclone, conveyor or manual. Furthermore, all of the tb-0708 series have the initiative twin-cylinder and trouble-free isolated twisters which can tie the bale automatically.
Automatic horizontal baling press tb-050510 series can compress shredded paper or plastic films. It's constituted by 10hp(7.5kw) motor, 125mm ram, 25 tons press force, and the capacity is 1.5 tons per hour. It's designed for various paper makers with small plant and low capacity demand. Tb-050510 was fabricated with rigid body which can make it very durable. Also, it has strong power including hydraulic unit, cylinder and 3 ways neck tension to compress loosely waste papers into tightly bales.
Automatic horizontal baling press tb-1011 sereis is constituted by dual motors(from 40~75hp), 100 tons press force(140 tons also available). It has a capacity from 10~18 tons per hour and makes the bale weight up to 1 ton. This paper baler can be used for baling a wide range of objects such as carton boxes, corrugated papers, magazines, cardboards....Etc. Suit for general recycler who need great capacity.
The feature of the automatic horizontal baling press tb-0911 series are initiative twin cylinder and trouble-free isolated twisters that can tie the bale automatically and make the user to operate it easily. Tb-0911 series is constituted from 30 to 80 motor, 200mm or 225mm ram cylinder, 63 or 80 tons press force, and with 4~12 tons per hour capacity. There are sereval kinds of waste materials can be fed including carton boxes, corrugated papers, magazines, cardboards....Etc. It is a good choice for paper mill who need large feeding aperture or greater capacity, and for the recycler who had smaller capacity.
Vertical waste baling press Compact in small floor area 1.High speed cycle time with strong pressing force 2.With retaining claws 3.With auto bale ejecter 4.Safe and easy operation
1. Cross cut shredder w/ credit card shredding function 2. Cut size: 4x28 mm(paper) 3. Entry width: 220 mm, 4. Shred capacity: 6 sheets (75g/©o), 1pcs( credit card) 5. Basket volume: 6 l 6. Noise level: around 60 db(a) 7: can shred paper, credit card, staple Unit size: (mm)198x273x355 Mastercarton size: (mm)506x335x428 N.W /unit: (kg)3.8 N.W/g.W per innercarton: (kg)3.8 / 4.5 N.W/g.W per mastercarton: (kg)7.2 / 9.45 Quantity per mastercarton: (pcs)2
Screen area: 0.5m2~2.0m2pulp consistency: below 3.0% capacity: 30~260t/dpulp inlet pressure: 0.1~0.25mpaapplication: pulp mill for waste paper or wood pulp to remove heave impurity and coarse screening the pulp. Email:kevin@hengbon.Com
Screen area: 0.4m2~6.0m2pulp consistency: 0.8~3.0%capacity: 18~600t/dpulp inlet pressure: 0.1~0.4mpa.Application: pulp mill (stock preparation).
Stainless steel cylinder mould Feature:1. Increase the area of filter water and improve capacity high. 2. Improve the quality of paper, such as formation, gram weight and the rate of tensile force with latitude. 3. Decrease consumption of felt and copper wire mesh. 4. Reinforce the wholeness and rotproofness of equipment, and expand the using life. 5. It has already produced crossing net, reeling net and inclined net.
ModelCbs-1100htm PaperWeightWidthLength 100-350g/©o550-1100mm400-600mm Finished bagBag bottom widthWidthLength 80-155mm180-330mm280-450mm Making speed40-80 pcs/min Total power3kw Voltage380v/220v Machine dimensions6001200120mm.
This cutter is applicable to all kinds of printing paper, kraft paper, glassine paper, books, leaflets, cards as well as all kinds of plastic, leather and metal foil, etc. Structural features: 1.Add-type air cushion platform, light control, dual digital display, lcd screen, the data resolution of 0.05mm, positioning accuracy of ¡à 0.15, 2. Concentration of fuel injection systems, optical line of the knife, mechanical rotation, quick tool change; ball screw and dual guide to push the paper runs a smooth light, low noise, accurate positioning, significantly improve the cutting accuracy and speed, and extend the life of the machine; built-in safety protection devices bed knife, cutting through the protection and automatic back-bit cd and other security devices; 3.Optional chrome and with air-cushion table, enhance operational efficiency; 4.Optional optical bench argon-plated, long-term use to prevent operator eye fatigue; 5.Centralized lubrication systems, security systems designed according to iec standards; 6.Model based a high-end computer program controlled, mid-range dual digital display, digital display and many were single (economic type) system, style diversification. Export wooden case
Dch0906 paper box die cut plotter sample flat bed cutting machine Blade, pen, creasing, wheel, servo motor Effective cutting area(mm)900*600 It is used in carton factory&color printing factory, it can cut and crease 2mm card paper and e corrugated paper Max speed 1000mm/s Smallest cutting diameter 1000mm/s Maximum cutting thickness 2mm card paper and e corrugated paper Control line and driver servo Vacuum 1.5kw Data form 220v10%50hz Data port pci port Data transmission speed 100mb/s Using dimension (mm) 1340*1070*1070 Input cushion area 32mb.
1.Power single phase 220 v, 50hz, 800w. 2.Function of machine: Specialized in rewinding the ink side in /out , wider ribbon roller to narrower ribbon rolls It is with edge cutting function, when rerolling the defective ribbon rolls, the edge of the ribbon can be cut off to make both ends of the ribbon rolls much tidy. And this can be also used for cut the ribbon from wide one to several narrower ones. 3.Unwinding width within 240mm, length within 1000m( dia.100mm) or it can be specially designed . 4.4rewinding width from 20-240mm.
GY-41 rigid box folding in machine is use to bend the extruding parts of the surface paper into the boxes.This machine has simple structure, convenient operation and fast speed features. It is used to side fold various sizes and shapes of paper boxes and the sizes and shapes can be adjusted 1 right angle platform for double side inner folding onto the paper box. 2 equipped with sensor to control the device. 3 platform can be adjusted according to the depth of the boxes. Model GY-41 Case size 420*420*150mm Speed 20-30 units/min Power 0.5kw, 220v Weight 240 kg Dimension 1000*700*1000.
Length: 1200mm Diameter: 50mm~150mm Paper Wall: 0.5mm~5mm Cutting Way: by air Power: 1.1KW Cutting Units: 8sets Size Of Disc Knife: 110x27x1.5mm. Weight: 0.8 ton Dimension: 2000x800x1200mm.
Tube Diameter: 30mm~300mm Tube Wall Thickness: 0.5mm~12mm Speed: 3-15m/min Cutting Length: Max 4000mm, flowing cutting controlled by photoelectricity switch. Power: Main Machine 5.5kw; Cutting: 0.75kw Control way: Frequency conversion; Multipoints in-phase control Transmission Way: Screw umbrella gear wheel Size of wheel: 320mm Cutting Way: Automatic cutting Belt way: Both right side and wrong side are ok Belt: circle nylon ,1pc Paper shaft: 1pc (with plating chrome) 3"or by order Glue System: ship, both sides of paper layer Paper-putting Frame: whole jointing steel, with little crane Bottom paper and face paper has own paper putting frame Sending paper from both sides (15layers),1 set glue tank. With heating bonding device for inner aluminum foils. Wegiht:3.2t Dimension: main machine 3200x2000x1800mm.
Tube Diameter:20mm~300mm Tube Wall Thickness: 0.5mm~20mm Speed: 3-15m/min Cutting Length: Max 4000mm,flowing cutting controlled by photoelectricity switch Power: Main Machine 15kw; Cutting: 0.75kw Control way: Frequency conversion. Multi-points in-phase control Transmission Way: Screw umbrella gear wheel Size of wheel:320mm Cutting Way: Automatic cutting Belt way: Both right side and wrong side are ok Belt: circle nylon ,1pc Paper shaft:1pc (with plating chrome) 76mm or by the buyers order Glue System: ship, both sides of paper layer Paper-putting Frame: whole jointing steel,with little crane Bottom paper and face paper has own paper putting frame Sending paper from both sides,1 set glue tank. Weight: 3.2t Dimension: main machine 3200x2000x1800mm.
