This equipment is widely used for steel structure workshop, roofs of simple and easy movable houses, wall body, suspended ceilings of air purification room, and separation. The rigid polyurethane foam has been recognized as the best building thermal insulation material by international world today. It has low heat conductivity, and high bending resistance capacity. This rigid polyurethane foam doesn't absorb water or decay, and it cannot be damaged by insects and mice. It has good fire resistance, and large scope of heat resistance. With the physical properties of polyurethane PU and our unique prescription, we combine high temperature polyurethane with coating steel panel, thus compact forming is achieved.
This slitting line is used for slitting raw material coils into strips. This machine can slit raw material coils into specific width. Our company has series of slitting lines, with thickness of 0.1-25mm and width up to 2500mm. The slitting line normally includes loading trolley, decoilerã?�guiding device (including lead head, press head, shovel head), coil head shear, centering and calibrating device, slitting machine, scrap rewinder, pre-distribution and tensioning machine, recoiler, and unloading trolley. And the main components are decoiler, slitting machine, scrap rewinder, recoiler, and PLC control system.
The line is especially for silicon steel (CRGO) coil longitudinal slitting. The wide coil (1000/1250mm) shall be opened and cut into required width strips and then rewinded into rolled coil. The main working flow is coil loading â?? decoiling â?? guiding â?? slitting â?? tensioning â?? recoiling â?? discharging.
Made in Turkey wall panels. We can make any design and any size
Sound insulation door is composed of door leaf and door frame, and is a finely fabricated steel door that is formed from high quality cold-rolled (galvanized) steel plate through cold machining, and filled with sound absorption/insulation materials in the door body based on sound insulation grade, adopts advanced technology, unique design and special seal fabrication technology, and has excellent fire protection, sound insulation and escape properties and stable application property. The size of sound insulation door and sound insulation property can be selected based on sound insulation grade requirements, installation space and fireproofing grade. Various hardware fittings can be provided based on user needs. The surface is coated with the finish (finish color can be designated) after rust prevention and spraying treatment, and powder spraying can also be carried out based on user needs (powder spraying treatment is not allowed after painting), and thermal transfer printing technology is adopted, and the surface of sound absorption/insulation board can be made from several apparent materials. It is characterized by rational structure, good integrity, strong strength, convenient construction, smooth and good-looking surface, flexible opening and robustness, etc. The maximum temperature resistance is 300â??~350â??, which can withstand aerodynamic load of 2000N/m2, and average sound insulation quantity is 40dB(A), and the maximum sound insulation quantity is up to 60dB(A).
Paneltek used to be a Joint venture of Greco Gres Group (Spain) and Fuji Ceramics (China). Based on the high technology and strict production standards from Spain, and the best clay materials in China, we've been supplying worldwide customers with high quality terracotta panels, louvers and bricks. Our products are widely used in the exterior building facades and interior decoration. Their outstanding advantages over other facade materials (Glass, Aluminium, Stones etc.) make them to be more and more popular among developers and designers. Terracotta Panels advantages: 1. Rich choice for colors, shapes, sizes and surface treatments. Totally meet designers' needs. 2. Bring the building a sense of elegance, classic, luxury, artistical. Never out of fashion. 3. Using 100% nature raw materials. Finished products can be recycled as raw materials. 4. Hollow structure. On the one hand, reducting the load of construction, on the other hand, sound and heat insulation. 5. Fired with tempreture over 1200 degree. Durable. Colorfast. 6. Extremly low water absorption. High intensity and strength. 7. No radiation. No light pollution. 8. Resistance to fire, frost, vibrate, acid and alkali etc. 9. Easy installation. Self-cleaning.
The roof panels are insulated products used for coating industrial and manufacturing facilities, depending on the strength requirements, aesthetic and economic construction, providing economy in energy consumption in cooling - heating, possibility for easy extension and easy metal perfect fit clasp. In various thicknesses. Thicknesses of panel: 30mm up to 100 mm Sheet thicknesses: 0.25mm up to 0.6 mm Colors: ral Max length / item : 13m ( with overlap there is no length limit ).
The panel leb wall with hidden support is composite thermal insulation panel composed of two slightly shaped, galvanized pre-painted sheet metal and insulating structural hard polyurethane foam core, and technology does not allow to show the panel mounting screw, produced by non-incriminating materials for environment and stringent quality controls. In various thicknesses. Thicknesses of panel: 40mm up to 200 mm sheet thicknesses: 0.25mm up to 0.6 mm colors: ral max length / item : 13.5m.
The leb wall hs etl wall panels are composite thermal insulation hidden support panel, consisting of two slightly shaped, galvanized and pre-painted sheet metal and rigid foam insulation palyourethanis structural core. To specific type insulating panel has a unique design that allows the use of a horizontal n vertical applications in projects with architectural requirements. Thicknesses of panel: 40mm up to 100 mm Sheet thicknesses: 0.25mm up to 0.6 mm Colors: ral Max length / item : 13m ( with overlap there is no length limit ).
The leb-tile roof panel is thermal insulating products used in house coatings, hotels and other structures where necessary aesthetic and architectural effect of a tile roof. It is also an ideal cover material in reconstructions of buildings, but also in old buildings additions where weight restrictions of the classic tiles. Thicknesses of panel: 65mm (average thickness- lower 45mm higher 95mm) Sheet thicknesses: 0.45mm to 0.60mm Colors: ral Max length / item : 9.25m ( with overlap there is no length limit ) Due to tile form the length are the following: 1.90 - 2.25 - every 35cm up to - 8.90 - 9.25.
The thermal insulating panels wall leb- wall (vs), consisting of two slightly shaped, galvanized and pre-painted sheet metal and insulating structural hard polyurethane foam core, are used for covering building facades, and for building internal partition walls and suspended ceilings. The insulating panels leb-freeze refrigerated chambers, are composite panel consisting of two slightly shaped, galvanized and pre-painted sheet metal and structural insulating polyurethane rigid foam core suitable for temperature-controlled rooms. Thicknesses of panel: 40mm up to 200 mm sheet thicknesses: 0.25mm up to 0.6 mm colors: ral max length / item : 13.5m.
The leb-tiie delux roof panels, thermal insulation products are used in house coatings, hotels and other structures where necessary aesthetic and architectural effect of a tile roof. In addition they offer a ready, absolutely ecological roof, the interior of buildings where applicable. The leb-tile delux ceiling panels are embedded in the bottom ribbing natural wood 12mm.They can be used in structures with visible roof, as it is, without the need of covering the panel with extra interior covering. Thicknesses of panel: 65mm (average thickness- lower 45mm higher 95mm) Sheet thicknesses: 0.45mm to 0.60mm Colors: ral Max length / item : 5.40m ( with overlap there is no length limit ) Due to tile form the length are the following: 1.90 - 2.25 - every 35cm up to - 5.05 - 5.40
MGO Chloride board is made of magnesium oxide, magnesium chloride,and water. After configure and adding additives, stable performance of magnesia gelled material, with alkali glass fiber network in reinforced material, lightweight materials as filler compound and into a new type of incombustible decorates material. Adopting special production process, fire protection, waterproof, tasteless, non-toxic, not frozen, not corruption, not crack, unchanged, non-combustible, high strength light weight, convenient construction, long service life, etc According to the different raw material and technology, MGO chloride board can be divided common mgo board and sanding mgo board. Features: 1) Fireproof and Waterproof 2) Light weight and High intensity 3) Sound insulation and Heat insulation 4) Heat preservation 5) Impact resistance 6) Cold resistance 7) Flexibility 8) Mothproof and anti-mildew 9) Environmental friendly Mgo board feature the following non-toxic components: magnesium oxide, magnesium chloride, perlite, sawdust and fiberglass mesh. This makes them ideal for residential, commercial and industrial constructions, such as: Single-family homes Garages Bathrooms Fireproof walls Ceilings Basements Schools Hospitals Restaurants Office buildings Hotels Any major project Building envelope Indoor and outdoor partitions
Highly customizable 6 panel cap, with applying any design embroidery/print. Price may vary by volume of quantity. Please contact for more details.
Brilltech Engineers Pvt. Ltd being leading VFD Panel manufacturers understand the ever-changing demands of its clients and their industry and deliver them the exact product what they are paying for. If you want to buy any of our offered range, you just need to make a call or send enquiries.
Instrumentation Panel is a most useful system in the computerized industry. It is commonly used in your car, manufacturing and computerized & control industry. We are providing these in wide variety of specifications to get to know the end specifications of the career.
Mobile White Board - made of 30 mm thick Aluminium Panel Frame powder coated to approved color, with two - 25 mm thick MDF Panel inserts - Top finished with white board Metallic laminate finished with white acrylic resin paint on both the sides and the bottom smaller one finished with white laminate. Compete board on White Powder coated MS frame with heavy duty castors. Over all size - 1800 mm Ht, 900 mm Ht, Board Thickness 30 mm (with aluminium frame), Base Mobile Trolley out out size - 600 mm by 920 mm MOQ - 50 Nos , Production Time 21 days from date of PO and Advance, Payment - 50% along with Order and Balance upon proof of readiness for dispatch.
Mimic Panel is best in showing the circulation of power as well graphic reflection of the control process. We are providing these products in top quality to serve the requirements of the market. We have been into the business of manufacturing, supplying & exporting electrical goods for a long time. We use graded raw material while manufacturing mimic control panels.
Brilltech is a well known fire panel manufacturers, providers & exporters based in indian. This is commonly used in household as well as in professional programs in the fireplace recognition system. We have produced this product totally in compliance to the worldwide technology to ensure efficient function.
Aluminium Composite Panel (ACP) / Aluminium Composite Material (ACM) is a widely used term describing flat panels that consist of a non-aluminium core bonded between two aluminium sheets. Aluminium sheets can be coated with PVDF or Polyester paint. ACPs/ACMs are frequently used for external cladding of buildings(building facades), advertisement board, shop decoration, ceiling decoration, bathroom cabinets, car body, etc.Aluminum frame alucobond aluminum composite panel prices for outdoor wall Product Description Aluminum frame alucobond aluminum composite panel prices for outdoor wall Width 1000mm /1220mm /1250mm /1500mm /1550mm /1570mm Length 2440mm /3200mm /4000mm /5000mm /6000mm(Max), can be customized Panel thickness 2mm /2.5mm/2.7mm/ 3mm / 4mm / 5mm / 6mm/ 7mm/ 8mm (3mm and 4mm are most popular) Thickness of ALU-layer 0.06mm,0.08mm,0.10mm,0.21mm,0.25mm,0.30mm,0.40mm,0.50mm Inner Core Normal non toxic PE core, one side unbroken plastic, two side unbroken plastic, virgin LDPE,fireproof material Color Solid color, metallic color, brush color, mirror, marble, wooden color, glossy,more than 60 colors Brand OEM, ODM Surface PE coating , PVDF coating, NANO, Brushed surface, mirror surface, marble look Thickness of film 0.07mm,0.09mm Packing 1220*2440*4mm 1500 sheets in 1*20’ft container, nude packing; wooden pallet package for LCL. Color card(part): Aluminum frame alucobond aluminum composite panel prices for outdoor wall Product list Aluminum frame alucobond aluminum composite panel prices for outdoor wallAluminum Composite Panel Aluminum frame alucobond aluminum composite panel prices for outdoor wall Hot sell ACP PE coating ACP PVDF coating ACP Mirror surface ACP Aluminum frame alucobond aluminum composite panel prices for outdoor wall 2015 new design ACP Marble look ACP Wooden surface ACP Brushed surface ACP Features 1. Excellent fireproof performance 2. Good performance on Heat-insulation & sound-insulation 3. Superior Weather resistance 4. Higher strength & impact-resistance 5. Higher plasticity & quakeproof performance 6. Various colors can be choosen, and Non-color difference winthin order 7. Convenient installation, easy maintenance 8. Applying composite panel is resources-conservational 9. Widely used in galleries, exhibitions, saloons, stores, offices, banks, hotels, restaurants and apartments etc.
