* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.
BACKGROUND
* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.
* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion
* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.
APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
Condition: new
Type: jaw crusher
Application: metallurgy, highway, railway, building materials, road constrcution, water conservancy, mining, chemical industry, quarried material, recycling.
Motor type: ac
Motor power(w): 15kw
Capacity(t/h): 5-20t/h
Place of origin: henan, china (mainland)
Brand name: yuhong
Model number: 250*400
Dimension(l*w*h): 1430*1310*1340mm
Weight:3000kgs
Certification: iso, ce
Warranty: 1 year after-sales
Service provided: engineers available to service machinery overseas
Color: be customed
After-sale service: for whole using life
Spare parts: for whole year
Raw materials:limestone, caco3, ore, concrete, granite
Installation: under our engineer's guide
Discharge size: 20-50mm
Max feeding size: 200mm
Capacity: 5-20t/h
Specifications
1. Certificate: iso, ce
2. Oem serive
3. 20 years experience
4. 5-20 t/h
Introduction
This series jaw crusher has properties of large crushing ratio, even granularity, simple structure, reliable operation, easy maintenance, and low cost. So this kind of jaw crusher can be widely used in mining, metallurgy, building material, highway, railway, water project, chemical industry, etc, for crushing various materials with compression strength less than 320mpa.
Main advantages:
We will send one set free mould together with main machine;all kinds of moulds can be customized.
Very low price, can be operated easily;
This type brick machine can produce pavers, standard bricks and hollow blocks.
Moulds:
H paver:
Paver.Jpg
Hollow block:
Hollow block mould.Jpg
Insulating brick :
Ib block.Jpg
2029511809[1]
Related conditions needed:
Operating requirements:
Working shed Other
Working site: 1300sq.M Staff and workers: 2-3
Working shed: 300sq.M Power distribution: 18kw
Raw material work shop: 300sq.M Water consumption: 3t/day
Office: 30sq.M Pallet: 1000pcs
Raw materials of the brick:
Wide range of raw materials could be adopted such as fly ash, coal residue, coal wastes, chemical residue, sand, stone, concent, cement, construction wastes and so on. Therefore, it is a new tpye of machine which has the characteristics of energy conservation and environmental protection.
2.View of our company
We care every step of manufacture process, and pay attention for quality inspection. Make each manufacture step be perfect.
We sell more than 150~180 sets brick machines to overseas every year, each set we will test installation in our factory, make sure not any little problem happen in buyer's jobsite
.Jpg
3. Oversea service and clients:
With advanced technology and prompt service, we build long business with world customers, such as poland, rumania, russia, australia, new zealand, canada, panama, ecuador, peru, chile, algeria, kenya, south africa, zimbabwe, philippines, indonesia, kazakhstan, mongolia, egypt, etc.
Main advantages:
We will send one set free mould together with main machine;all kinds of moulds can be customized.
Very low price, can be operated easily;
This type brick machine can produce pavers, standard bricks and hollow blocks.
2.Components of one set qt4-26 building materials machinery :
Feeding width:914mm
Effective width:610mm
Total motorpower:17.9kw
Bending power: 3.0kw+1.1kwx2;
Sewing power: 2.2kw
Cutting power: 3.0kw;
Forming power: 7.5kw
Cutting: hydraulic cutting
The depth of the groove:203mm
Equipped with generator
Material of roller shaft: 45# steel, galvanized
Material of rollers: 45# steel, quenched with hard chrome
1. The rollers and shafts are both solid, the rollers are made by 45# steel plated with hard chromium.
2. Our machine can be divided in to two cutting ways, one is hydraulic, and the other is mechanical. Controlling system include manual and automatic. It can be also designed according to your requirement
3. Our hoisting tool is light and handy; the weight of hoisting tool of our company is 2kg. It is convenient to install and uninstall the hoisting tool. Its hoisting speed is quick.
Controlling system: plc&manual
Feeding width:914mm
Effective width:610mm
Total motorpower:17.9kw
Bending power: 3.0kw+1.1kwx2;
Sewing power: 2.2kw
Cutting power: 3.0kw;
Forming power: 7.5kw
Cutting: hydraulic cutting
The depth of the groove:203mm
Equipped with generator
Material of roller shaft: 45# steel, galvanized
Material of rollers: 45# steel, quenched with hard chrome
1. The rollers and shafts are both solid, the rollers are made by 45# steel plated with hard chromium.
2. The thickness of our arch shaping leaf is 10mm, the process of manufacture for our arch shaping leafs are controlled by computer.
3. The length of the finished sheet is measured by the electronic measurement instrument or mechanical measurement instrument.
4. Our machine can be divided in to two cutting ways, one is hydraulic, and the other is mechanical. Controlling system include manual and automatic. It can be also designed according to your requirement.
5. Our helping hand wheel and the counter are used in adjustment of the bending of arch sheet, which makes the operation simpler.
6. Our hoisting tool is light and handy; the weight of hoisting tool of our company is 2kg. It is convenient to install and uninstall the hoisting tool. Its hoisting speed is quick.
Controlling system: plc&manual
This material is mainly used in the indoor decoration as super class buildings. Such as hotels, restaurants, shopping malls theaters, dancercise, cinemas, stations, auditoriums, offices, sitting rooms, business buildings, electronic workshops, precision apparatus rooms and industrial or residential buildings.
Specifications:
1) size: 595 x 595mm, 600 x 600mm, 603 x 603mm, 595 x 1195mm, 603 x 1212mm
2) thickness: 7mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm
3) White color and aluminium foiled surface
Ip 55 enclosures
Mutiple feet locations
Aluminium frame, end shields and base
High strength cable gland
Shaft key and protector suppplied
Superior paint finish
S1 duty
Utilise vacuum impregnated
Class f insulaton
condition:new
type:eco interlocking brick machine
brick raw material:clay
processing:brick molding machine
method:hydraulic pressure
automatic:no
capacity:2600pcs/8hr
place of origin:shandong, china (mainland)
brand name:fulang
model number:fl1-20
dimension(l*w*h):3300x1500x1600mm
voltage:free
power:12hp
certification:iso9001:2000 &ce
warranty:one year
after-sales service provided:engineers available to service machinery overseas
model:fl1-20 hydraulic interlocking bricks machine moving
pressure:16mpa
shaping cycle:20s
condition:new
type:interlock block making machine
brick raw material:clay
processing:brick molding machine
method:hydraulic pressure
automatic:semi automatic
capacity:2600-3000pcs per day
place of origin:shandong, china (mainland)
brand name:fulang
model number:fl1-25 compressed earth block making machine
voltage:220v/240v/380v/440v/adjustable
power:5.5kw
dimension(l*w*h):1500x600x1400mm
certification:iso9001:2000 &ce
warranty:1 year
after-sales service provided:engineers available to service machinery overseas
overall size:1500x600x1400mm
shaping cycle:20 seconds
presure:16mpa
total weight:400kgs
condition:new
type:interlock block making machine
brick raw material:clay
processing:brick molding machine
method:hydraulic pressure
automatic:semi automatic
capacity:2600-3000pcs per day
place of origin:shandong, china (mainland)
brand name:fulang
model number:fl1-25 compressed earth block making machine
voltage:220v/240v/380v/440v/adjustable
power:5.5kw
dimension(l*w*h):1500x600x1400mm
certification:iso9001:2000 &ce
warranty:1 year
after-sales service provided:engineers available to service machinery overseas
overall size:1500x600x1400mm
shaping cycle:20 seconds
presure:16mpa
total weight:400kgs
condition:new
type:interlock block making machine
brick raw material:clay
processing:brick molding machine
method:hydraulic pressure
automatic:semi automatic
capacity:2600-3000pcs per day
place of origin:shandong, china (mainland)
brand name:fulang
model number:fl1-25 compressed earth block making machine
voltage:220v/240v/380v/440v/adjustable
power:5.5kw
dimension(l*w*h):1500x600x1400mm
certification:iso9001:2000 &ce
warranty:1 year
after-sales service provided:engineers available to service machinery overseas
overall size:1500x600x1400mm
shaping cycle:20 seconds
presure:16mpa
total weight:400kgs
Yingfan Polypropylene (PP) biaxial geogrid is a high-performance soil reinforcement product to resist elongation when subjected to heavy loads for long periods of time. By reducing the cost of construction, the biaxial geogrid can meet project requirements and offer full technical support. (Please note that the price is not stable due to raw material (influenced by oil price) and exchange rate.)
Product Features
- Stabilization
- Reinforcement
- Durability and high resistance
Usage Areas
- Municipal roads, Railway ballast, highways, and airports
- Industrial shipping yards
- Parking lots, steep slopes
- Retaining walls, bridge abutments... and more
Standard Size
- 3/4/6 m width
- 50-100 m length
- Upon request
197182 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
