Mono Coat Egg Shell Latex - interior is Latex Acrylic copolymer based Premium Latex - emulsion paint A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc. USES Regent Paints Mono Coat Egg Shell Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Mono Coat Egg Shell Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Mono Coat Egg Shell Latex. PROPERTIES Colour : Full range - as per shade card Finish : Egg Shell Solids(Volume) : 52% and above Specific Gravity : 1.27 +/- 0.1 Theoretical Coverage : 350 â?? 450 sq. ft. per gallon DRYING TIME :â?? AT 25 �° T Touch Dry : 2 hours To Recoat : 4 hours Vehicle Type : Acrylic Copolymer
ACRYLIC TOP COAT it is an acrylic resin based premium top coat for metals. It has exceptional color and gloss retention in a variety of climatic condition. PROPERTIES Colour : full range Solids: 38 + 2 % Theoretical Coverage 9 â??12 m2/Lit Recommended (Dft) : 30 - 40 Microns/ per coat Recommended (Wft) : 90-100 Microns/ per coat DRYING TIME â?? AT 25 �° Surface Dry: 5-10 mins To Recoat: 3 â?? 4 hours Vehicle type: Modified alkyd Specific gravity: 1.15 �±0.05 (depends on color)
solvent based fire retardant paint, based on special resins and Chemicals. The dried film gives good resistance against fire and Protection to base substrate. RECOMMENDED USES As fire retardant topcoat paint on wood, steel and concrete surface. At recommended thickness it has excellent fire retardant properties. ADVANTAGES One component special resin based paint, easy to apply, excellent water, weather and U.V. resistance. Dry film has excellent fire retardant properties
High quality decorative alkyd enamel for use as topcoat on alkyd primers or undercoat. PROPERTIES Colour : Aluminium Solids : 40% Theoretical Coverage 10 â??12 m2/lit @ 25u DFT DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: 24 hours Vehicle type: Modified alkyd Specific gravity: 1.0 +/- 2% Flash point: 38�°C
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents. PROPERTIES Colour : black Solids : 70 �± 2% Specific gravity 1.40 at 25�° C Theoretical Coverage 3 â?? 5 m2/lit (@ 70u M) DRYING TIME :â?? AT 25 �° T To touch: 15 min To Recoat: 2 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Flash Point: 35�° C. Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10�° C - +70�° C
DECORTEX D�©cor tex is water borne acrylic texture based on modified styrene emulsion with aggregates, which provide special pattern on the wall, woods suited for all climatic condition PROPERTIES Colour : As per shade card Finish : Texture finish Consistency: Thixotropic Solids: 65 % �± 3 % Specific gravity: 1.70 �± 0.05 Theoretical Coverage 1 -2 m2/ltr DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: overnight Number of coats: 1 Application by: Roller for heavy tex or Hooper spray
Epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 7-8 m2/ lit Curing time: 15 â??20 hours at 25�° C Full cure: 7 days Flash point 22�°C (ISO 367 â??83) Specific gravity: 1.35+.05 when mixed A+B Pot life: 8 hours at 25�° C Mixing ratio: 4 parts baseâ??Aâ?? : 1 part hardner â??Bâ?? Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Multi-purpose bitumen coal tar emulsion. PROPERTIES Gloss level: matt (ISO 2813-78) Solids: 25% (+/- 2 %) Viscosity: 22000 cps @25 �°C Brookfield 4/4) Theoretical Coverage 1 â?? 1, 5 m2/lit (@ 40u) DRYING TIME â?? AT 25 �° To touch: 1 hour To Recoat: 24 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Specific gravity: 1.03 (+/- 2%) Flash point: Inflammable liquid.
High quality alkyd enamel white for use on all wood, metal or masonry surfaces. This product is extremely durable with excellent flow and leveling characteristics. PROPERTIES Colour : Milky white Solids : 55�±2 % Theoretical Coverage: 10 â??12 m2/Lit DRYING TIME : â?? AT 25�° To handle: 4 â??6 hours To Recoat: 8 - 12 hours Vehicle type: Modified alkyd Specific gravity: 1.10 �±0.02%(depends on color) Viscosity : 95�±15 second in Ford Cup No.4 Flash point: 37�°C
Tollens epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 8 m2/ lit Curing time: 15 - 20 hours at 25 C Full cure: 7 days Flash point 22C (ISO 367 - 83) Specific gravity: 1.35 when mixed A+B Pot life: 8 hours at 25�¯ Mixing ratio: 4 parts base A: 1 part hardner B Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Paints (Water Based and Oil based), Kashmir Artwork of Paper mesh (more than 25 items and available in any quantity), Molded Sculptures (Decorative models for Garden, Home and Halls), Bird Stands (ideal for Home and Gardens) etc..etc..
paints
Two Component Polyurethane Based Matt Varnish PRODUCT DESCRIPTION Product type Polyurethane Brightness 40-45 gloss ± 5 Volume Solids (%) 57 ± 1 Solid Matter by Weight (%) 60 ± 1 Theoretical Coverage (m / kg) 10-12 dry film thickness 30-35 POT LIFE SA (20 C) 5 Density (g / cm) 0.93 + - 0.03 Powder drying, Touch drying, Stacking dry (20 �ºC / minute) 20-30 minutes-50-70 minutes-24-30 hours Full Curing 24 hours (20C) Mixing Ratio P.V.1541-07 1.KOMPENANT 100 parts (By Weight) P.V.S.07 2.KOMPENANT 25 parts (By Weight) Application Thinner Universal acrylic polyurethane thinner 35-40 parts Application Tools Spray gun Airmix Spray, Roller Color Transparent
TWO COMPONENT ACRYLIC BASED MATTE VARNISH PRODUCT DESCRIPTION Product type ACRYLIC Gloss 20-25 gloss �± 5 Solid Matter by Volume (%) 55 �± 1 Solid Matter by Weight (%) 56 �± 1 Theoretical Coverage (m�² / kg) Recommended application amount (6-7.5 dry film thickness 30-35�µ) 100-120 g for one layer POT LIFE SA (20 �ºC) 24 Density (g / cm�³) 0.99 + - 0.03 Powder drying, Touch drying, Stacking dry (20 �ºC / minute) 10-15 minutes-30-40 minutes-18-20 hours Full Curing 24 hours (20�ºC) Mixing Ratio A.V.W-1020 1.KOMPENANT 100 parts (By Weight) A.S.W-01032 2.KOMPENANT 20 parts (By Weight) Application Thinner Universal acrylic polyurethane thinner 70-80 parts Application Tools Spray gun Airmix Spray, Roller Color Transparent
Glow Technology Glow in the dark paint is water-based acrylic paint. It can absorb light during the daytime, and create a glow effect in the dark environment, unlimited times. Our glow paint can be easily applied on multiple surfaces, dries fast, and maintenance-free.
Nerolac Paint Goldan Brown 4 Ltr
Hiflex Silky Touch Bite Registration material is a vinyl polysiloxane based impression material for full arch and quadrant bite records in a very short time for greater patient comfort and reduced mandibular deviations.
Hiflex Silky Touch Light Body is a hydrophilic vinyl polysiloxane impression material for the production of extra ordinarily smooth and highly precision impressions for models, crowns, bridges and dentures.
Hiflex Silky Touch Putty is a poly vinyl siloxane impression material that features excellent wettability, tear strength and dimensional stability. It is suitable for use as the tray material in the putty/wash impression technique for reproduction of teeth prepared for crowns, fixed bridges as well as both partial and complete removable prosthodontics.
We manufacture all kind of Paints,surface coatings,Anti corrosive coatings,Heat resisting coatings. We also do export merchandising of Iron ores fines.
