PVDF Powder - Excellent Exterior Durability Nylon Powder - Excellent Salt Spray HR Powder - 600 C
Available in Black Temperature Resistance upto 600 C Low Bake System. Suitable for plastic parts. 800 Hrs accelerated weathering
N. C. Sealer Top Coat Lacquer Matt Top Coat Lacquer Semi Glossy Top Coat Lacquer Glossy Wood Stains Available in NC, PU and Melamine Grades Suitable for Wooden Furniture and wood works
1K Pu Varnish Glossy Water Base & Solvent Base Easy To Apply Single Pack Superior Durability Excellent Gloss Retention
1K PU Varnish Matt Water Base & Solvent Base Easy To Apply Single Pack Superior Durability Excellent Gloss Retention
Easy To Clean Stain And Dirt Resistant Excellent Adhession High Performance Non Yellowing & Long Lasting Protection Against UV Degradation.
Easy To Clean Stain And Dirt Resistant Excellent Adhession High Performance Non Yellowing & Long Lasting Protection Against UV Degradation.
Quick Drying Glossy And Matt Lacquer Finish. Can Be Apply With Brush,cloth And Spray. Heat And Water Resistance Good Wear Resistance
Quick Drying Glossy And Matt Lacquer Finish. Can Be Apply With Brush,cloth And Spray. Heat And Water Resistance Good Wear Resistance
General Purpose Thinner Rohs Compliant
Quick Dry Thinner High Purity Solvent Blend Rohs Compliant
Epoxy Thinner Is Clear And Water-like Liquid. Improve Flowability , Making Easy To Mix And Pour
Excellent Levelling Of Paint Film Unoform Drying Speed Excellent Compatibility With Pu And Tsa Paint
A. PRODUCT DESCRIPTION: These are Paint thinners. These are designed to improve the flow of a range of MARLAC Paint products. Can also be used as a cleaner for metal cleaning, pumps and tools before and after applications. B. TYPICAL USE: Suitable as Thinner for : 1)Alkyd and Oil based Paints 2)Epoxy Paints 3)Polyurethane paints 4)All types of Stoving and Air drying paints 5)Cleaning thinner C. COLOUR: Colourless clear liquid. D. PRODUCT DATA: (a) Boiling Range : Calculated (b) Flash Point : As Per Std (c) Density : 0.85 + 0.1 The data may slightly vary depending on the properties of the RM Solvents used. E. PACKAGING: 5 or 20 Lt Drum F. STORAGE: The material must be stored as per the regulations. Keep the containers in Dry, Cool, Well Ventilated space and away from the source of Heat and ignition. Containers must be kept tightly closed. Handle with care. G. SHELF LIFE: Minimum 12 months, provided stored properly. H. HEALTH AND SAFETY: Please follow the precautionary advices on the container. Use under well ventilated conditions. Do not inhale spray mist. Avoid Skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately. I. DISCLAIMER: The information in this document is given to the best of MIPPLâ??s knowledge, based on the laboratory testing and practical knowledge. MIPPL reserves the right to revise the data without further notice. Users should always consult MIPPL for specific guidance on the general suitability of this product for their needs and specific practices.
Blend Of Genuine Solvent Improve Film Smoothness And Gloss Of Lacquer . Quick Drying Properties Non Milky Effect Mixed With Nc Paint
Easy To Apply Single Pack Superior Durability Excellent Gloss Retention SCOPE USES Kisomin Aluminium Paint is a modified Synthetic Resin based enamel. It provides high Light fastner and brightness with excellent orientation finish. it has good adhesion on interior or Exterior surfaces. Recommended as a decorative finish coat & can be applied on surfaces like Grill, Windows, Cabinets & wide range Metal Structures. FEATURES/ BENEFITS * Smooth durable finish. * Smooth flow & easy to apply. * Excellent coverage & hiding. * Superior surface protection KEY ATTRIBUTES * Application temperatures : 10-44 degc VISCOSITY FOR APPLICATION * For Brushing 40"-45" at 30C * For Spraying 18" 20" at 30C * For Roller 55"-60" at 30C SURFACE PREPARATION APPLICATION BRUSH CONVENTIONAL SPRAY NOTES : HEALTH & SAFETY Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign particles. System of Coating should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before application of paint, thin down to achieve desired viscosity & filter through white cloth. Apply Kisomin Paint to finish. Stir the base thoroughly and then mix to uniform consistency. Apply by diluted material, where viscosity has to be ensure 40-45 sec by f.c. B4 Add Kisomin thinner to adjust viscosity depending on spray condition. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm. 1. Use off the mixed paint . 2. Do not apply when temperature falls below 10c or rises above 50c and when relative humidity rises above 90%. Do not apply during rain, fog or mist 3. Brushes and spray equipment should be cleaned with Thinner, 4. Special care to be taken to close immediately the partly used Diluted Material. Please refer to the separate Material Safety Data Sheet available with detailed information
HI - Performance Syn. Enamel Paint Superior Durability Color Pigment System Easy To Apply By Brush , Roller And Spray PRODUCT PARAMETERS 1. Type : Single Pack 2. Composite : Modified Oil Based Resin with Finest Bright Pigments, Hydrocarbon solvent and addives 3. Use Recommended Thinner to make Applicaon Viscosity 4. Applicaon Tools : Brushing, Spraying or Roller 5. Flash off = 30 Minutes 6. Drying Time : Surface Dry : 4 Hours Hard Dry : Overnight 7. Curing Time : 72 hours 8. Over coang Interval : MIN : Overnight MAX : 5 Days 9. Color : Assorted Shades . Finish : 10 Smooth Finish 11 Thinner / Cleaner KISOMIN THINNER 12. Shelf Life: Up to 12 Months as long as the sealed containers are kept under cover in a dry place under normal temperature. SCOPE USES Kisomin durable synthec enamel are long lasng & solvent based paint used for wide range of surface. Recommended as a decorave finish coat & can be applied on surfaces like Metal, Cement Brickwork, Asbestos Grills and Wooden surfaces like doors, Windows, Cabinets & wide range of furniture FEATURES/ BENEFITS * Smooth durable finish. * Smooth flow & easy to apply. * Excellent coverage & hiding. * Superior surface protecon. KEY ATTRIBUTES * Applicaon temperatures : 10-44 degc PERFORMANCE PROPERTY Chemical Resistance A Exposures Splash & Mild Fumes/Outdoor Spillage Resistance cid + + Alkalis + + Solvent NA NA Salt ++ ++ Water +++ +++ Flexibility +++ Adhesion +++ Excellent : +++ Very Good : ++ Good : + SURFACE PREPARATION APPLICATION BRUSH CONVENTIONAL SPRAY NOTES : HEALTH & SAFETY Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign parcles. System of Coang should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before applicaon of paint, thin down to achieve desired viscosity & filter through white cloth. Apply Kisomin Paint to finish. Sr the base thoroughly and then mix to uniform consistency. Apply without thinning Add Kisomin thinner to adjust viscosity depending on spray condion. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm�². 1. Use off the mixed paint . 2. Do not apply when temperature falls below 10 C or rises above 50�°c and when relave humidity rises above 90%. Do not apply during rain, fog or mist 3. Brushes and spray equipment should be cleaned with Thinner, 4. Special care to be taken to close immediately the partly used Diluted Material. Please refer to the separate Material Safety Data Sheet available with detailed information
>=100 Liters US$ 5.00 Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 Gallons US$ 3.50 Payments:This supplier also supports L/C,T/T,Western Union payments.
Polyurethane Coating is two component chemically cured product that forms a film that is resistant to chemicals, solvents and abrasion. PROPERTIES Colour : Full spectrum Solids: 50 +/- 2 % Theoretical Coverage 10 - 11 m2/lit DRYING TIME : AT 25 C To handle: 3 hours To Recoat: 5 hours Flash point: 27C Specific gravity: 1.10 �±0.05 Pot life: 6 hours Mixing ratio: 4 parts base "A" :1 part hardner "B" Solvent: Polyurethane thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.