Cryptocrystalline Magnesite MgCO3 with extremely low silica and iron content, white colour, and very low level of heavy metals. RMA is a raw magnesite milled product with 90% MgO content on ignited basis, which is used in the production of ceramics (tiles etc.). Magnesium Carbonate: isolation, rubber, ink, glass, ceramics, paint, pharmacy and cosmetics industry. Magnesium Chloride: Magnesium metal production, textile, paper, ceramics and cement. Magnesium sulphate: Pharmaceutics, artificial fertilizer industry.
Best Quality Soda Feldspar in 200mm
State: Lumps Color: White Type: Talc Lumps Whiteness: 94%-98% min Origin: Pakistan Product is in loose container SGS REPORT OF OUR PRODUCT IS OFFERED BELOW: Calcium Oxide as CaO = 0.073% Silica as SiO2 = 59.20 % Iron Oxide as Fe2O3 = 00.16% Magnesium as Mgo = 33.26% Loss on Ignition as LoI = 07.17% Alumina as Al2O3 = 00.11% Chloride as Cl = 00.02% Moisture = 0.003% Whiteness = 94%-98% min Asbestoses = Nil Packing = Bulk in Containers Size = 10mm to 500mm Port of Loading = Karachi Pakistan
Dear Buyer - I take immense pleasure in introducing to you Amaravathi Mines& Minerals Pvt Ltd a two year old company in the business of manufacturing of barytes (baso4), exports from India, If your company required barytes powder please let us know the requirement and we are very happy to service you in the supply of barytes. Barytes specification Property Value Appearance Gray free flowing powder Iron as fe2o3 0.44% Matter in soluble in water 0.024% Particular size (passing thru 75ãâµ) 1.46% Relative density (@27/270c) 4.20 Alumina as al2o3 0.48% Insoluble minus silica 94.50% Silica as sio2 4.02% Calcium and magnesium as caco3 52 mg/kg 200 mess passing through 97.5 (api grade). 1 and 1.5 tone bags
Lumps API Grade Chapter 13: Typical performance of BENTONITE API 13A when tested as per API 13A section 4 is as follows: Properties Specifications Viscometer Dial reading at 600rpm 32-40 Yield point/plastic viscosity ratio 2-3 Failtrate volumer (in cc) 13.5-15.0 Moisture % 9.5-10.0% Residue greater than 75 micron (200 mesh) wer analysis 1.0-3.0% However, Customised specifications as per buyer requirement can also be made. Packaging: Jumbo Bags Application: Crude
Wollastonite Lumps Specification SiO2 48% min CaO 44% min Fe2O3 0.25% max L.O.I 1.5% max Size 0-10mm,0-50mm Packing in 1mt big bags Uses For steel production
Total Sulphur - (S) - 28% Average P - .03 max C - .03 max Cu - .03 max Si - .03 max Fe - The Balance Quantity Lumps 0-5 mm 10-50mm 25-150mm
SCANDIUM ORE, $5 PER GRAM, FOR ORDERS OVER 250 POUNDS. FREE SHIPPING !!! SCANDIUM ORE, $7.50 PER GRAM FOR ORDERS LESS THAN 250 POUNDS TO 1 POUND, WHICH IS OUR MINIMUM ORDER. PLUS SHIPPING COST. SCANDIUM ORDERS, WILL BE PROCESSED IN ORDER THAT I RECIEVE BANK WIRE TRANSFERS.
Purified Talc Powder (KORB-SB-1) is the purest form of talc mineral in powder form. It is considered safe for use in pharmaceuticals and food industry,Talc Powder is a versatile mineral filler and extender. It is used in a variety of industries. It is white-colored, soft, chemically inert, lamellar, opaque, hydrophobic and organophilic.
Ceramic Grade Bentonite (KORB-BEN-BP03.60) is produced by activation of specially selected Ca- Bentonite having a very white color, high brightness and very low iron content which provides a big advantages for colour sensitive ceramic and tile products. It can be used in fine ceramics, porcelains, enamels and floor tiles, improves moulding properties, plasticising and stabilising properties of the products. SiO2 58.42% Al2O3 23.79% CaO 1.08% Na2O 1.12% Fe2O3 0.89% K2O 0.72% MgO 0.81% TIO2 0.38% Ceramic Grade Bentonite (KORB-BEN-BP03.60) is available in big bags or loose form. When kept in cool, dry and non-humid conditions no deterioration may be observed in 2 year period. NOTES: THIS MATERIAL TESTED BY ENDURA (H & R JOHNSON).THE KNOWLEDGE IN THIS PRODUCT BULLETIN SHOULD BE CONSIDERED AS GENERAL INFORMATION ONLY AND NOT BE USED FOR PURCHASE SPECIFICATIONS TYPICAL ANALYSIS ARE BASED ON THE AVERAGE FIGURES.
Ceramic Grade Bentonite (KORB-BEN-LUMPS) is produced by activation of specially selected NA- Bentonite having a very white color, high brightness and very low iron content which provides a big advantages for colour sensitive ceramic and tile products. It can be used in fine ceramics, porcelains, enamels and floor tiles, improves moulding properties, plasticising and stabilising properties of the products. BASIC SPECIFICATIONS: Water of Plasticity 70-% Fired SHRINKAGE 13-14% Dry MOR 22.00KG/cm2 Fired MOR 150.36kg/cm2 Moisture 20% Water Absorption 17.23% Whiteness 67.9 L 80% a 0.37 b 10.6 CHEMICAL SPECIFICATIONS(MAIN COMPOUNDS): SiO2 - 68.82 % Fe2O3 - 0.63 % Al2O3 - 14.17 % K2O - 1.05 % CaO - 1.76 % MgO - 3.10 % Na2O - 1.14 % PACKAGING INFORMATION: Ceramic Grade Bentonite (KORB-BEN-LUMPS) is available in big bags or loose form. When kept in cool, dry and non-humid conditions no deterioration may be observed in 2 year period. NOTES: THIS MATERIAL TESTED BY ENDURA (H & R JOHNSON).THE KNOWLEDGE IN THIS PRODUCT BULLETIN SHOULD BE CONSIDERED AS GENERAL INFORMATION ONLY AND NOT BE USED FOR PURCHASE SPECIFICATIONS TYPICAL ANALYSIS ARE BASED ON THE AVERAGE FIGURES.
MAGNESITE RAW
Our company has 800,000 metric tons of pyrite resources per annum. S ~45-49%, Fe ~ 42%, SiO2 ~ 6%, Cu ~ 0.2%, As ~ 0.02%, Pb ~ 0.1%, Zn ~ 0.1%, C ~ 1.5%, F ~ 0.034%, Sn ~ 0.001%, H2O ~ 8%, Mesh between 50-20.
Bakelite powder
ZrO2- 60 to 65 % SiO2 - 30 to 34% TiO2 - 0.06% max Fe2O3 - 0.001 % max
Raw Magnesium Carbonate Lumps/Powder MgO 42% - 45% CaO 2% max
Laterite : Laterite is a soil layer that is rich in iron oxide and derived from a wide variety of rocks weathering under strongly oxidizing and leaching conditions. It forms in tropical and sub tropical regions where the climate is humid. It is a reddish weathering product of basalt. Laterites are rusty-red in color because of high iron oxide content. Laterite is well known in asian countries as a building material for more than 1000 years. It was excavated from the soil and cut in form of large blocks. Uses and benefits of laterite uses : Used as a building material. Strong, hardened varieties of laterite are sometimes cut into blocks and used as brick stones for building houses. Laterites are economically most important for ore deposits, such as bauxite. Hardened laterite varieties are also applied for the construction of simple roads. Nowadays solid lateritic gravel is readily put in aquaria where it favours the growth of tropical plants. In artifacts, monuments, sculpture, oil and gas reservoir, decoration etc. Laterite- cement blocks are more economical building units for walling units.
I am Babar from Marked Orbit Estate one of the mining and metallurgy Contractor and material supplier within the kingdom and out of Kingdom (EXPORTER). We have huge Quantity of "Mill Scale" which extract or collected from steel mills of Saudi Arabia with high purity. Also I want to inform you that i get your Company information from tradekey and also from your website. I am sending you this mail to OFFER MILL SCALE WITH GOOD QUALITY AND PURITY. if your company is interested in purchasing Mill Scale, We can do long Cooperation. We will be waiting for your reply. Notes: Country of Origin: Saudi Arabia Product: Mill Scale Price (FOB): Negotiable (Market Competitive) Packing: As per request of Customer Delivery Term: As per Request of Customer Payment Terms: L/C, TT, others Sr. # Chemical Composition Percentage % 1 SiO2 1.22 2 Al2O3 0.05 3 Fe2O3 97.70 4 CaO 1.26 5 MgO 0.43 6 SO3 1.75 7 K2O 0.07 8 Na2O 0.02 9 Cr 0.03
Mill Scale Product Description : Marked Orbit Estate supply Mill Scale with high purity according to International Customer Standards. Product origin : Saudi Arabia Key Specifications/Special Features : We supply mill scale after filtering and screening to increase the more purity of the material, so that other particles should be removed before delivery. Different product grades with different performances can be available. Supply the most suitable grade according to customer requests. We can share with you Lab Analysis report and prices within the Quotations. Minimum Order Size and Packgaing details : MOQ: 1000 ton Packaging: containers with jumbo bags, or Bulk Vessels shipment, as per customer request.
Marked Orbit Estate supply Feldspar for Ceramics Industry. Product origin : Saudi Arabia Key Specifications/Special Features : Different product grades with different performances can be available.Supply the most suitable grade according to customer requests. We can share with you Lab Analysis report and prices within the Quotations. Minimum Order Size and Packgaing details : MOQ: 3000 Ton
