Raw materials : medical grade silicon Manufacturer : ts international Place of origin : made in Korea Size For women S : under 30 years who have not given birth vaginally L : over 30 years or who have given birth vaginally 100units / carton
Cap and fda certified Fast test result in 5 sec. Micro blood sample , less than 0.5ul Barcode scanner built-in Gdh-fad strip Total quality control E-report of daily qc
Will be in new delhi from feb 1st to 5th, 2013 pocket fetal doppler mainly applies to detect the fetal heartbeat rate from the twelfth week Lcd can display fhr, synchronous fhr signal, battery indicator, volume of sound and alarm indicator accurately Built-in rechargeable battery can work continuously more than 5 hours Blue backlight lcd display for use conveniently at night Automatic power off ( one minute), self-detect function, and alarm function when fhr is out of the normal range or battery power is in shortage Only 270g, can be carried conveniently with a gallus Built-in speaker and collocated with earphone jack 2.0mhz probe. Single unit dimension: 24cm x 23cm x 12cm gross weight: 1.5kg 20 pcs/carton dimension: 44cm x 36cm x 42cm gross weight: 18kg Normative collocation: gallus, operation manual, approval certification, warranty card
Features: Pocket home-use fetal doppler mainly applies to detect the fetal heartbeat rate from the twelfth week for pregnant woman at home Only 90g, the feature is designed according to ergonomics, integrating the probe and mai unit Lcd can display the fhr, and freeze current fhr data on lcd Built-in dry battery can work intermittent more than 4 hours Alarm function when fhr is out of the normal range or battery power is in shortage Collocated with earphone, and can hear the fhr clear and loud. Special tips: The main purpose of fetal home monitoring is to hear the fetal heartbeat, estimate the frequency of fetal heart beating in one minute, monitor whether the fhr(fetal heartbeat rate) is within the normal range(normal fhr range: 120-160bpm)advise pregnant woman to hear 5 to 10 minutes when hearing the fhr each time, and draw a form to record the fhr for inspectionthis model is not expert medical detector, only used to assist to hear the fhr and frequency of fetal heart during gestation. Please use according to doctor's advice and do not replace the conventional pregnancy test, any questions concerning pregnant woman, please consult the doctor. Specifications: Executive standard: en61266: 1995 Ultrasonic frequency: 2.0mhz10% Ultrasonic intensity: 10mw/cm2 Comprehensive sensitivity:90db Fhr range: 60--210bpm(2bpm) Fhr alarm range: 100bpm or160bpm Isptp: 0.1mpa Battery: 9v dry battery (optional for 9vni-mh rechargeable batteries and charger) Maximum audio output intensity: 1w Doppler frequency: 100--3000hz Static continuous working time:4h Working temperature: 10-40 Humidity: 80% Atmospheric pressure: 86--106kpa Packaging collocation: Paper carton packing Single unit dimension: 26cm x 24cm x 12cm gross weight: 1.5kg 18 pcs/carton dimension: 49cm x 26cm x 33cm gross weight: 8.5kg (vacuum plastic packaging) Normative collocation: earphone, gel, operation manual, approval certification, warranty card
5.7" lcd display can display the us (for twin) and toco data and monitoring curve Fhr collection signal for quality indication, alarm indication for abnormal fhr, fetal movement indication Coding keyboard adjusts all parameter setting of unit, memory and replay the data in 24 hours(for option) Record fhr, uc, fm mark, necessary character interpretation and monitoring time synchronously with 832 thermal linear array printer Curve printing speed, line of thin or thick, signal collection rate can be adjust for the requirements of user, the printing speed can be setup to 1, 2, 3cm/min Adjust the upper and lower alarming limit, real time, date and other parameter, the set-up data can be saved automatically after powered off The monitoring data can be conveyed to the exterior computer by rs-232. Single unit suitcase package dimension: 55cm x 26cm x 36cm gross weight: 10.5kg Single unit paper carton package dimensiont: 55cm x 26cm x 36cm gross weight: 8kg Normal collocation: 2 pcs 1.0mhz probe, toco probe, remote marker, switch power, cable, 250ml gel, operation manual, warranty card, approval certification, 2 pcs printing paper
Vg-led0504 Double heads 5+4 lighting unitsIllumination(lux) 160000+140000 Consumption200w+200w/12v Weight 72kg Package size1020mm*740mm*700mm Gross weight97kg Technical data: Color temperature3500-5000k Diameter of spot150-300mm Illumination depth>800mm Light adjusting steps1-9 Restore color index95-98 Shadowless proportion98% Led life>50000h Up doctor-head temperature
Features: Detect the blood stream status of arterial/venous by 8.0mhz, detect the blood flow average velocity, detect the result of finger/toes and part of body's vein anatomies operation. Detect the blood flow average velocity, detect the result of fingers, toes and part of body's vein anatomies operation; it can be used to listen the temporo-mandibular joints (they become noisy when they start to brake because of the bite problems), assist doctor to check the conditions of the joints and predict the result of treatment. Built-in arm microprocessor & real-time displays blood flow velocity waveform; Choose menu by pressing keys, store 50 curves; High-speed usb port, can be connected directly to computer to analyze, store, and print the waveform. Delect the pulse rate and show pr simultaneously Ppg probe for option. Specifications: Ultrasonic frequency: 8.0mhz¡à10% Battery: 7.4v/900mahrechargeable lithium Input voltage: dc 9v 1000ma Doppler frequency: 100--7000hz Display: color lcd 128¡á96 dots, display blood stream average velocity, pk, time, volume and battery Working temperature: 10-40¡æ Humidity: ¡ü80% Atmospheric pressure: 86--106kpa Packaging collocation: Single unit dimension: 26cm x 25cm x 12cm gross weight: 1.5kg 6 pcs/carton dimension: 49cm x 26cm x 33cm gross weight: 8.5kg Normative collocation: charger, gel, operation manual, approval certification, warranty card Color lcd can display the waveform and the detecting result of the blood stream
Operation guide: Destroy disposable syringe to reject cross infection completely while melting the needle, Insert the needle into the melting hole, and then press down the syringe gently when the Needle touches the electrodes inside. While the needle is being melted, there will be spark and the needle indicator will be Flashing for about three seconds, which is a normal phenomena; It has the overheat protection function to protect machine work normally while melting the needle;ozone disinfection function and alarm function when the drawer is full of residue; The residual liquid in the needle will be vaporized instantly during melting, the ¡°working indicator¡± Is flashed when melting the needle, which means the needle is being melted and the whole process Lasts 1-3 seconds; While cutting the head of the syringe body, insert the syringe into the hole and pull the handle To cut it off. The whole process lasts 3 seconds. Destroy needle specifications 18g---34g Dealing with the waste residue: There is a taphole at the bottom, under which there is a rubbish drawer to collect waste residue. Please clean the rubbish drawer after using some time (usually after melting 50pcs of syringes). Press the drawer gently at the bottom, which will flick automatically, then clean out the waste Residueand install again.
Pocket fetal doppler mainly applies to detect the fetal heartbeat rate from the twelfth week Lcd can display fhr, synchronous fhr signal, battery indicator, volume of sound and alarm indicator accurately Built-in rechargeable battery can work continuously more than 5 hours Blue backlight lcd display for use conveniently at night Automatic power off ( one minute), self-detect function, and alarm function when fhr is out of the normal range or battery power is in shortage Only 270g, can be carried conveniently with a gallus Built-in speaker and collocated with earphone jack 2.0mhz probe. Specifications: Executive standard: en61266:1995 Ultrasonic frequency: 2.0mhz¡à10% Ultrasonic intensity: ¡ü10mw/cm2 Comprehensive sensitivity: ¡ý90db Fhr range: 60--210bpm(¡à2bpm) Fhr alarm range: ¡ü100bpm or ¡ý160bpm Isptp: ¡ü0.1mpa Battery: 9v dry battery (optional for 8.4vni-mh rechargeable batteries and charger) Maximum audio output intensity: ¡ü1w Doppler frequency: 100--3000hz Static continuous working time: ¡ý2h Automatic dormancy time limit:1 minute Working temperature: 10-40¡æ Humidity: ¡ü80% Atmospheric pressure: 86--106kpa Packaging collocation: Single unit dimension: 24cm x 23cm x 12cm gross weight: 1.5kg 20 pcs/carton dimension: 44cm x 36cm x 42cm gross weight: 18kg Normative collocation: gallus, operation manual, approval certification, warranty card
Medical fluid infusion warmer BFW-1000 is a kind of warming device to warm the liquid to be infusioned into human body by warming the infusion pipe, with high efficiency and easy use. Dry groove warmer structure: Adopt conventional infusion pipe to warm the infusion pipe directly, no need special consumables. Features: The BFW series is an instrument can heat the infusion/blood by electrical energy, dry warmer. It has use the temperature sensor can automatic regulation of fluid temperature. Infrared detection function can work continuously for 3 to 6 hours; Prompt function: the audible and visual alarm to remind doctor; Design Water-proof. The thermostat inside help the infusion stability, without overheating. BFW-1000£ºHighlight LED display; Can start to warm within 1 minute after switching on. Temperature range: 28¡æ - 41¡æ ( ¡À1¡æ ) Humidity: 35 ¨C 95 %RH ( Non condensing) Flow Rate: 1-15ml/min Medical fluid infusion warmer BFW-1000 is a kind of warming device to warm the liquid to be infusioned into human body by warming the infusion pipe, with high efficiency and easy use. Dry groove warmer structure: Adopt conventional infusion pipe to warm the infusion pipe directly, no need special consumables. Features: The BFW series is an instrument can heat the infusion/blood by electrical energy, dry warmer. It has use the temperature sensor can automatic regulation of fluid temperature. Infrared detection function can work continuously for 3 to 6 hours; Prompt function: the audible and visual alarm to remind doctor; Design Water-proof. The thermostat inside help the infusion stability, without overheating. BFW-1000£ºHighlight LED display; Can start to warm within 1 minute after switching on. Temperature range: 28¡æ - 41¡æ ( ¡À1¡æ ) Humidity: 35 ¨C 95 %RH ( Non condensing) Flow Rate: 1-15ml/min
Characteristics: 1.Renew operation irradiation parts rapidly and improves doctors' working environment 2.Save energy, only 1/10 as the normal incandescent lamp and 1/2 as the halogen lamp 3.Color temperature can be adjusted from 3500 to 5000k randomly 4.Led life is 50 times longer than halogen lamp 5.Illuminance equality, high shadowless rate, high definition to improve doctor's working efficiency Technical data: Color temperature3500-5000k Diameter of spot150-300mm Illumination depth>800mm Light adjusting steps1-9 Restore color index95-98 Shadowless proportion98% Led life>50000h Up doctor-head temperature
Characteristics: 1.Renew operation irradiation parts rapidly and improves doctors' working environment 2.Save energy, only 1/10 as the normal incandescent lamp and 1/2 as the halogen lamp 3.Color temperature can be adjusted from 3500 to 5000k randomly 4.Led life is 50 times longer than halogen lamp 5.Illuminance equality, high shadowless rate, high definition to improve doctor's working efficiency Technical data: Color temperature 3500-5000k Diameter of spot 150-300mm Illumination depth >800mm Light adjusting steps 1-9 Restore color index 95-98 Shadowless proportion 98% Led life >50000h Up doctor-head temperature
The multi-chamber polyp suction trap This product is designed to install easily between the endoscope and the suction receptacle eliminating the need to retrieve polyps from collected endoscope effluent. 5 chambers collect the polyps as they are retrieved through the endoscope channel, isolating each for identification and pathological analysis. Feature: Individual packaging. Single-patient use (disposability) reduce biohazard and sample contamination risk. Easy in-line installation. In just a few seconds, the trap can be installed between the endoscope and suction receptacle Fine-mesh screen allows it to capture even the smallest polyps Multi-chamber allows for multiple samples Eo sterile & hygienic individual packaging Clear plastic construction allows visual verification of polyp collection Reduces contact with patient effluent. Each pack in individual eto sterile bag measurement ctn(mm) quantity net weight(kg) 280*240*120 10pcs/case 0.49 /case
Simple installation between the endoscope and the suction Readily monitored Effective polyp capture Easy sample retrieval Disposable stainless steel laryngoscope blade with led light source. Prevents cross-infection Saves hidden reprocessing costs Led light technology means Strong, focused, reliable light Ideal blue-white spectrum Optimal viewing Longer battery life Atraumatic tip for patient safety and comfort Specially designed for safer, cleaner disposability Unique design allows for perfect disposability Our products are vertified by tuv rheinland group. Each pack in individual eto sterile bag
Reaction system: -reaction cuvette: 90 pcs made of special material -reaction volume;200-500ul -reaction time: 8-10 minutes -reaction temp: 37centigrade -mixing sytem: independent mixing probe Optial system -light source: halogen-tungsten lamp -wavelength: 300-700nm, 9 wavelengths -absorbance range: 0-4 abs -resolution: 0.001 abs -spectrophotometry: rear spectrophotometry Qc -various qc managements, insert qc randomly, save & display & print qc chart, define different qc in advance Calibration -calibration: linear/ nonlinear multi-points calibration -retest: retest the sample automatically when the result is out of the linearity range or the sample is not sufficient Cleaning system -eight-step automatic washing, automatic cuvette dry function -water consumption: 4l/hour Operating system -window xp or 2000 Net weight: 109kg Gross weight: 169kg
3/5 part differentiation, 19/20 parameters +3 histograms Double apertures for wbc and rbc/plt separately Whole blood and pre-diluted counting modes available for different patients' sample requirement 45/60 samples/hour throughput Optional barcode scanner, printer port and other enhanced functions. 14-25kg
Two counting mode: whole blood & prediluted Patented aperture technology: automatic clog-clearing with high pressure and lower rate of clog Storage capability of up to 16000 sample results with histograms Automatic diluting, lyzing, mixing, rinsing Built-in thermal printer Bar code scanner ( optional) Reagent alarm system ( optional) Net weight: 19kg Gross weight: 22kg
20papameters, 3histograms Double chamber and appertures Whole blood and prediluted counting modes both available 60 samples / h 20000 samples can be stored External keyboard. Nw:18.6kg, gw:21.8kg Measurement:35*43*44cm Package:76*62*56cm
Discrete automatic, random access with two independent discs and independent stirring needle 200-400 photometric tests per hour, more than 40 items on board Reusable reaction cuvettes with advanced 8 steps cleaning Automatic probe cleaning High sensitive liquid level detection Back spectrophotometry with 9 wave lengths, accurate testing result Light weight construction, flexible installation and maintaining. 100kg - 210kg
We have the worlds most advanced & effective laser hair removal device with 1 handpiece and 6 filters for treating various indications. The machine automatically suggests the right parameters for delivery threshold heat. Assured results within 2 sittings. 3 dedicated filters for treating hair reduction on fair skin by 610 nm, medium skin by 640 nm and dark skin by 690 nm. 30 kg.
